v0.7.3: elektraleidingen nooit meer door een raam of deur (makeOpeningTest): een stijgleiding boven/onder een opening (wcd onder een raam) gaat eerst op dezelfde hoogte opzij tot naast de opening, langs dezelfde wand met een deur of raam ertussen via het plafond, gevellampen om verspringende gevelhoeken heen en het uit elkaar schuiven van buizen eindigt nooit in een opening (alle modellen 0 kruisingen); felsplaten als gevelafwerking (zink/antraciet/zwart, per woning, wand of wandstuk, opbouw als verticale rabat, kleuren gedeeld met het felsdak, in 3D, PDF en kosten); felsplaat op dak én gevel = geen boeideel, de dakplaat zet om over de rand zonder opstand, een boeideel ernaast stopt gelijk met zo'n rand (ook naast daktrim); zijwand bij een overkapping (Palen overkapping › Zijwand) in plaats van een hoekpaal, gestuukt, met de bekleding van de gevel in hetzelfde vlak aan de buitenkant (in 3D, plattegrond, PDF, DXF en kosten); model Reest (12,9 × 7,85 m, lessenaarsdak hoog aan de noordgevel over twee units in één vlak, overkapping bij de voordeur met witte zijwand, aanbouw met plat dak en daktrim, zuidgevel en dak in antraciet felsplaten, verder verticale rabat)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

README.md

@@ -18,21 +18,31 @@ build-stap. Direct openen via `file://` werkt niet (texturen/lucht).
 ## Structuur
 
 ```
-index.html          app-shell: ribbon, splashscreen
+index.html          app-shell: bovenbalk (menu, documenten, opslaan), sneltoetsen, splashscreen
 css/app.css         alle stijl
 js/vendor/          three.js r128, eigen OrbitControls, jsPDF
-js/core/            gedeelde helpers: geometrie, bouwfasen, ribbon, UI-kit, PDF-bladen,
-                    labels, camerageheugen, weergavefilter, skybox, licentie, logo
+js/core/            gedeelde helpers: geometrie, weergavelagen (lagenmenu), menubalk, eigenschappenpaneel
+                    (inspector.js), UI-kit (werkbalk, weergave, popovers), PDF-bladen,
+                    DXF-schrijver (dxf-writer.js), IFC-schrijver (ifc-writer.js), OBJ-schrijver
+                    (obj-writer.js), ZIP (zip-writer.js), labels, camerageheugen,
+                    skybox, licentie, logo
 js/wall/            WallModel (logica) + wand-PDF + wand-editor
 js/floor/           FloorModel (logica) + vloer-PDF + vloer-editor
 js/roof/            RoofModel: dak (plat/lessenaar/zadel) + dakrand (boeidelen/daktrim)
+                    PostModel: palen onder een overkapping/veranda (dak per unit te verlengen), of een dichte
+                    zijwand op een vrije hoek
+js/house/chimney-model.js  ChimneyModel: schoorsteen tegen een buitenwand (hol, sparing in de wand zoals een raam,
+                    ook over een naad, zonder hout erin; sparing in het dak met raveelwerk (stijlen, balken, kreupele
+                    balken), de beplating eindigt op het kader; onderbreekt de dakrand; een nokbalk stopt ervoor;
+                    buiten steenstrip/stuc, binnen als de wanden of eigen; in de plattegrond
+                    te verslepen langs de buitengevel)
 js/lighting/        LightingModel: gevellampen, boeideel-spots, binnenspots
 js/elektra/         ElektraModel + ElektraPdf: meterkast, schakelaars (letters), wcd, groepen, leidingen
 js/sandwich/        SandwichModel: sandwichpanelen rondom
 js/room/            RoomModel: ruimtes (verfemmer), functie, netto m², afwerking, vals plafond
 js/interior/        FixtureModel: inrichting (sanitair, keuken, kasten, meubels, boiler)
 js/unit/            UnitModel: 1 vloer + 4 wanden, naden, wandstukken
-js/house/           HouseModel (woning) + woning-PDF + woning-editor
+js/house/           HouseModel (woning) + woning-PDF + CAD-export (house-dxf.js) + BIM-export (house-ifc.js) + woning-editor
 js/cost/            CostModel (kostenberekening), posten + noodwaarden, CostCsv (CSV's), venster Kosten & tijden
 js/app.js           menubalk, versienummer, actieve editor
 json/defaults/      referentie-JSON's (niet runtime ingeladen)
@@ -49,9 +59,11 @@ assets/             logo, texturen, skybox
 - **Assen/zijden.** Bovenaanzicht boven = noord: voor = noord, achter = zuid,
   links = west, rechts = oost (interne sleutels blijven voor/achter/…).
 - **Hoogtes** gelden vanaf bovenkant vloer (loopvlak).
-- **Bouwfasen** (`BuildStages`): regelwerk → elektra (buizen, dozen, meterkast) → beplating → vochtdoek →
-  latwerk → gevel & dak → afgewerkt, de volgorde in de hal. De 3D toont de
-  gekozen fase; lagen die daarin aan beide zijden zijn ingesloten worden niet
+- **Weergavelagen** (`ViewLayers`): regelwerk, elektra, beplating, vochtdoek,
+  latwerk, gevelbekleding, kozijnen, dakbedekking, afwerking, verlichting,
+  inrichting, ruimtes, dak en maten, elk los aan/uit; de snelkeuze Fase zet
+  alles tot en met een bouwfase aan (de volgorde in de hal). Lagen die aan
+  beide zijden zijn ingesloten worden niet
   gebouwd (stijlen tussen spaanplaat en doek, latten en doek achter de rabat,
   sporen tussen plafond en dakbedekking). Specificaties en totalen rekenen
   altijd met alle lagen.
@@ -74,7 +86,11 @@ assets/             logo, texturen, skybox
   en plafond naar de meterkast (strekkende meters per type, draad, buis,
   steekverbinders op module-naden), materiaallijst en eigen PDF-blad.
   Buizen minstens 50 mm uit elkaar (gebundeld alleen het laatste stuk naar
-  de meterkast). Vloer-wcd's met leiding door de vloer. Elektra ook op de
+  de meterkast). Nooit door een raam of deur (`makeOpeningTest`): een
+  stijgleiding boven/onder een opening (wcd onder een raam) gaat eerst op
+  dezelfde hoogte opzij tot naast de opening, langs dezelfde wand met een
+  deur of raam ertussen via het plafond, gevellampen om de gevelhoeken heen,
+  en uit elkaar schuiven van buizen eindigt nooit in een opening. Vloer-wcd's met leiding door de vloer. Elektra ook op de
   PDF-bladen per wand, vloer en dakvlak (plafond). Alles verplaatsbaar door
   te slepen in de plattegrond. Kosten (groep Elektra): buis + draad per
   meter, boorgaten (geteld op stijlen, regels en balken), dozen,
@@ -85,7 +101,11 @@ assets/             logo, texturen, skybox
   opening), kleur buiten en binnen (wit, grijs, antraciet, zwart). Volgt de
   maat van de opening, ook een schuine bovenzijde. Deur: kant van het blad,
   scharnierzijde en draairichting (naar binnen/buiten); openslaande deuren
-  met zijlichten = twee deuren naast elkaar. Schuifdeur: 1 of 2 bladen
+  met zijlichten = twee deuren naast elkaar. Koppelen: een opening die tegen
+  zijn buur aan staat (zelfde onderkant en hoogte, samen max. 2850 mm) vormt
+  daarmee één sparing zonder stijlen, dagkanten, latten of kozijnstijlen
+  ertussen; twee draaideuren worden stolp (bladen tegen elkaar), anders één
+  gedeelde tussenstijl. Schuifdeur: 1 of 2 bladen
   (uit elkaar), in de wand of op de wand aan een rail (binnen- of
   buitenzijde), glazen of dicht blad. In de plattegrond (app en PDF) een
   draaicirkel per deur en de schuifrichting per schuifdeur; in de loopmodus
@@ -97,31 +117,57 @@ assets/             logo, texturen, skybox
   geschilderd in de plafondkleur (Binnen › Wanden › Plafond), zolang
   "Geschilderd" aan staat; anders kale OSB.
 - **Dakvorm/wandhoogte:** per unit een dakvorm (Unit › Dakvorm: plat,
-  lessenaar, zadel, mansarde of wolfsdak, met schuiven en hellingshoek).
-  Daaruit volgen de wanden: de kopgevels krijgen de daklijn (bij mansarde
-  met twee knikken, bij een wolfsdak afgeknot op het wolfseind, met
+  lessenaar, zadel of wolfsdak, met schuiven en hellingshoek).
+  Daaruit volgen de wanden: de kopgevels krijgen de daklijn (bij een
+  wolfsdak afgeknot op het wolfseind, met
   daarboven driehoekige wolfseinden met de dakhelling tot de nok, met een
   rechte nok ertussen), de haakse wanden staan vlak op de goothoogte. Het
   bovenste deel van een wolfsdak is gewoon houtwerk: sporen, hoekkepers,
   nokbalk en kopbalken (ook in zaaglijst, specificaties en kosten).
+  Een dubbel lessenaardak (twee units, elk hoog aan hun gezamenlijke naad,
+  op de mm gelijke goot, nok en hoogte op de naad: samen een zadeldak)
+  krijgt net als een zadeldak een stalen nokbalk onder de naad; één
+  lessenaar of twee die zo niet aansluiten niet. Staat er een schoorsteen
+  op de nok, dan stopt elke nokbalk vóór de schoorsteen.
   Goot en nok gelden over de volle vloermaat (goot boven de buitenkant van
   de gevel); staat de kopgevel tussen de haakse wanden, dan loopt zijn
-  daklijn daar precies op aan. Knik en wolfseind schalen mee met goot en
-  nok (verhouding). Bij een knik (mansarde) sluiten de dakvlakken in
-  verstek aan. De PDF heeft voor een wolfsdak een eigen blad met het
+  daklijn daar precies op aan. Het wolfseind schaalt mee met goot en
+  nok (verhouding). De PDF heeft voor een wolfsdak een eigen blad met het
   bovenste deel (bovenaanzicht houtwerk + stuklijst).
   Grenzen (`UnitModel.LIMITS`): nok max 5 m, goot / plat dak max 3 m (vanaf
-  bovenkant vloer tot onderkant dak), unit max 4,3 x 14 m. Platte daken van verschillende hoogte krijgen elk hun eigen
+  bovenkant vloer tot onderkant dak), unit max 4,7 x 14 m. Platte daken van verschillende hoogte krijgen elk hun eigen
   boeideel (versprongen, het lage loopt door tot onder het hoge). Wijzig je een
   wandhoogte in de wand-editor, dan geldt dezelfde regel vanuit die wand.
   De daklijn van een wand hoort bij de wand zonder naden: loopt een wand
   door een naad langer door (bijv. de kopgevel naast een gekoppelde unit),
   dan blijven nok en knikken op hun plaats (`UnitModel.topLineOn`).
+- **Dakaansluiting (L/T):** staat een unit met nokdak (zadel of
+  wolfsdak) met zijn nok haaks op de langszijde van een buur met nokdak
+  (vleugel tegen hoofdvolume), dan loopt de vleugel het hoofddak in tot
+  zijn nok, met kilkepers in de binnenhoeken (bij gelijke goot, nok en
+  overspanning onder 45°); het
+  wolfseind van de vleugel aan de naad vervalt. Ligt de vleugel gelijk met
+  een kop van het hoofdvolume, dan wordt die kop een schild in de vlakken
+  van de vleugel (hoekkeper, de goot loopt door; de kopgevel staat dan op
+  goothoogte, een wolfseind daar vervalt). Een vleugel die in een wolfseind
+  van het hoofdvolume zou steken sluit niet aan. Elke unit houdt zijn eigen
+  dakdeel (sporen, kreupele sporen, kepers, knik- en nokbalken; stalen
+  nokbalk alleen over de eigen nok) met een eigen PDF-blad
+  (`HouseModel.roofJoins`, `RoofModel.computeJoinedRoof`). Niet bij dak
+  over de hele woning; dakramen in zo'n dakdeel doen nog niet mee.
 - **Overkapping:** bij een dak over de hele woning met `cover` loopt het
   dak door tot de omhullende rechthoek waar geen unit staat (bijv. een
   terras naast een kortere module), met een afgewerkte onderplaat in de
-  kleur van het boeideel (`HouseModel.coverExtensions`).
-- **Dak over de hele woning:** tabblad Dak › "Over hele woning": één
+  kleur van het boeideel (`HouseModel.coverExtensions`). Palen
+  (Woning › Dak › Palen overkapping) komen onder de vrije dakrand; met
+  "Zijwand" krijgt een vrije hoek geen paal maar een gestuukte wand van
+  200 mm van de dakhoek terug tot de gevel, langs de zijkant van de
+  overkapping (bij een hoek tussen twee vrije randen de kant met de kortste
+  weg naar de gevel); in 3D, plattegrond, PDF, DXF en kosten
+  (`PostModel`, `dak.zijwandM2`/`dak.zijwandMontage`). Ligt de buitenkant
+  in het vlak van een gevel, dan loopt die bekleding (felsplaten, rabat,
+  steen) erover door, gelijk met de gevel en tot onder de dakrand.
+- **Dak over de hele woning:** eigenschappen Woning › Dak › "Over hele woning": één
   dakvorm (zelfde invoer als per unit) over de omhullende rechthoek van alle
   units; een wolfsdak alleen bij een rechthoek (bij een L-/T-vorm zouden
   de wolfseinden kilkepers vragen, dan wordt het een zadeldak), bijv. een
@@ -155,12 +201,20 @@ assets/             logo, texturen, skybox
   aangrenzende, dan krijgt het een eigen rand rondom (boven het lage dak
   zonder spots). De rand van het lage dak loopt dan door tot de gevel van
   het hoge, of langs een zijgevel tot de volle overstek (onder de hoge
-  rand). Boeideel en daktrim steken 80 mm boven het dakleer uit.
+  rand). Boeideel en daktrim steken 80 mm boven het dakleer uit. Hebben
+  dak én gevel onder een rand felsplaten, dan komt er geen boeideel: de
+  dakplaat zet om over de rand, net vóór de gevelbekleding en zonder
+  opstand (`RoofModel.FELS_EDGE`, zetwerk zit in de prijs van de
+  felsplaten); een boeideel ernaast stopt gelijk met de buitenkant van zo'n
+  rand (ook naast daktrim).
 - **Gevel:** gevelbekleding per woning, met override per wand en per
   wandstuk: rabat (vochtdoek + kruislat + rabat 12 mm, kleur per woning,
   getekend als plankentextuur die over naden doorloopt), steen (181
-  texturen) of stucwerk (pleisterlaag 15 mm op cement-gebonden plaat, kleur
-  per woning, `WallModel.STUC`). Een zijde kan gesplitst worden (wand ›
+  texturen), stucwerk (pleisterlaag 15 mm op cement-gebonden plaat, kleur
+  per woning, `WallModel.STUC`) of felsplaten (staande naad, banen van
+  500 mm, zink/antraciet/zwart; opbouw als verticale rabat, kleuren gedeeld
+  met de felsplaten op het dak, `WallModel.FELS`; kosten `gevel.felsM2` en
+  `gevel.felsMontage`). Een zijde kan gesplitst worden (wand ›
   Wandstukken › Splitsen op, gemeten vanaf de linker vloerhoek van buitenaf):
   elk stuk wordt een eigen wand-element en kan een eigen gevel krijgen
   (bijv. stuc links, hout rechts). Steen is overal een
@@ -179,7 +233,7 @@ assets/             logo, texturen, skybox
   (o.a. tegels), FIBO-wandpanelen (decor, tot een hoogte of tot het plafond),
   eigen verfkleur en een vals plafond op een vaste hoogte (alleen waar het
   dak hoger ligt; wandafwerking en binnenspots volgen). Laag in de
-  plattegrond (Beeld › Tonen: Ruimtes), label met netto m², in de structuur,
+  plattegrond (Lagen › Ruimtes), label met netto m², in de structuur,
   het rapport, de kosten (vals plafond, FIBO) en op de PDF-plattegrond met
   een ruimtestaat. Het zaadpunt hoort bij een unit en schuift mee.
 - **Inrichting** (`interior/fixture-model.js`): zwevend toilet (wandcloset
@@ -187,8 +241,8 @@ assets/             logo, texturen, skybox
   (douchegoot, glaswand, regendouche), keukenblok (spoelbak, hoge kast met
   koelkast en oven, vaatwasser, bovenkasten), kookeiland met inductieplaat,
   kledingkast, bed, eettafel met stoelen, bank met chaise longue, fauteuil,
-  salontafel, tv-meubel, boiler en wasmachine. Binnen › Inrichting: kies
-  een stuk en klik in de plattegrond; slepen, bij een wand snapt de rug op
+  salontafel, tv-meubel, boiler en wasmachine. Gereedschap Inrichting (I): kies
+  een stuk in de werkbalk en klik in de plattegrond; slepen, bij een wand snapt de rug op
   het wandvlak (Alt = vrij), D = draaien, Del = verwijderen. Per stuk maten
   en opties (front, plek spoelbak, glaswand links/rechts, ...). In 2D, 3D
   (afgewerkte fase), de PDF-plattegrond, de structuur en de kosten (groep
@@ -196,24 +250,86 @@ assets/             logo, texturen, skybox
   schuift mee.
 - **Verlichting:** boeideel-spots of gevellampen (per gevel verdeeld,
   override per wand) en binnenspots in een raster per unit.
-- **Ribbon** (`core/ribbon.js`, vervangt de menubalk): Bestand · Start ·
-  Gevel · Dak · Binnen · Constructie · Verlichting · Rapport · Beeld · Extra,
-  plus een gekleurd tabblad voor de selectie (unit, wandstuk, binnenwand of
-  naadwand) dat vanzelf opent. Velden staan in groepen naast elkaar, met
-  schuiven voor maten met een logisch bereik. Dubbelklik op een tabblad
-  klapt de ribbon in. Plattegrond en 3D gebruiken de volle breedte; tabblad
-  Rapport toont het rapport (transport per unit, gewicht, afmetingen,
-  kosten, hout, plaatwerk, met staafdiagrammen) in plaats van de plattegrond.
-- **3D:** schuif Bouwfase linksonder; Beeld › Tonen: Dak/Lampen; Beeld ›
-  Doorsnede (wanden afgesneden op een instelbare hoogte, schuif in de ribbon
-  en onder de 3D, snede wit afgedekt), binnenzijde in een
-  verfkleur (afgewerkte fase), omgeving Ontwerp/Dag/Nacht, Render met lampen
-  als echte lichtbronnen.
+- **Indeling** (zelfde patroon als CAD/BIM-pakketten; elke functie op één plek):
+  bovenbalk met menu Bestand (nieuw, openen, opslaan, exporteren,
+  projectgegevens, kosten & tijden) · Beeld · Help, de geopende ontwerpen als
+  tabs en de knop Opslaan; links de structuur (groepen in-/uitklapbaar en
+  onthouden; de groep met de selectie klapt vanzelf open); in het midden een werkbalk met
+  gereedschap (Selecteren V, Binnenwand W, Ruimte R, Inrichting I, met de
+  opties van het actieve gereedschap ernaast; Unit toevoegen) en weergave
+  (Lagen, Omgeving, Doorsnede X, Render, Lopen L, Rapport 4, 2D + 3D / 2D /
+  3D met 1/2/3); rechts het eigenschappenpaneel: de selectie (unit,
+  wandstuk, binnenwand, ruimte, inrichting, elektra) met kruimelpad terug,
+  of zonder selectie de woning (kerncijfers en inklapbare secties Gevel,
+  Dak, Binnen, Verlichting, Elektra, Constructie); onderin een statusbalk
+  met de hint van het gereedschap en meldingen. Wand- en vloer/dak-editor
+  hebben dezelfde indeling (werkbalk boven, paneel met tabbladen en
+  Resultaat rechts; binnen de woning met "← Woning" of Esc terug). Help ›
+  Sneltoetsen (?) toont alle toetsen. Rapport toont transport per unit,
+  gewicht, afmetingen, kosten, hout en plaatwerk in plaats van de
+  plattegrond, als masonry (kaart in de kortste kolom, leesvolgorde blijft).
+- **3D en plattegrond:** één lagenmenu (Lagen in de werkbalk, met bouwfase
+  als snelkeuze) voor 3D en plattegrond; plattegrond zoomt met het
+  scrollwiel en de knoppen rechtsonder (F = passend), verschuiven met
+  slepen; Doorsnede (wanden afgesneden op een instelbare hoogte, schuif in
+  de werkbalk, snede wit afgedekt), binnenzijde in een verfkleur (afgewerkte
+  fase), omgeving Ontwerp/Dag/Nacht, Render met lampen als echte
+  lichtbronnen.
 - **Transport:** per unit buitenmaat (incl. gevelafwerking), hoogte en
   gewicht (vloer/wanden/dak) met een indicatieve breedteklasse.
 - **Uitvoer:** JSON opslaan/openen en een samenhangende PDF (aanzichten
   noord/oost/zuid/west als vlakke render met legenda afwerking, plattegrond,
   vloeren, wandstukken, binnenwanden, totalen).
+- **CAD-export (DXF):** Bestand › Exporteren › CAD (DXF); los van
+  Opslaan/Ctrl+S. DXF R12 (AC1009), opent in elk
+  CAD-pakket (AutoCAD, BricsCAD, DraftSight, LibreCAD, …); DWG maakt het
+  CAD-pakket zelf met Opslaan als (echte DWG schrijven vergt een GPL- of
+  commerciële bibliotheek). Modelruimte 1:1 in mm: plattegrond met noord
+  boven en de zuidwesthoek van de units op 0,0, eronder de vier gevels in een
+  2×2-raster (maaiveld als basis). Plattegrond: wanden per stuk als gesloten
+  polylijn, onderbroken bij sparingen die onder het snijvlak (1500 mm) beginnen
+  (hogere gestreept), stijlzone en gevelbekleding als eigen lagen, kozijnen
+  (raam: kader + glaslijn; deur: stijlen, blad en draaicirkel als boog;
+  schuifdeur: bladen, pijlen, rail), ruimtegrenzen als gesloten polylijn met
+  naam/m²/plafond, inrichting, dakrand, palen, schoorsteen, verlichting,
+  elektra, naden en elementcodes. Gevels: dezelfde vlakken als de
+  PDF-aanzichten (`HousePdf.viewProjections`) als lijntekening met verborgen
+  lijnen weg, kozijnen met kader, blad, zij-/bovenlicht en glas
+  (`KozijnModel.viewLines`). Maatvoering als echte DIMENSION (maatstijl
+  TECTUM): ketting per buitenwandstuk langs de sparingen, totaal per stuk en
+  van de woning, hoogtes maaiveld/peil/top per gevel. Lagen `PL-*`
+  (plattegrond), `AZ-*` (aanzichten), `MAATVOERING`, `TEKST`; tekst,
+  maatvoering en lijntypes afgestemd op 1:50 (`$LTSCALE`/`DIMSCALE` 50).
+- **BIM-export (IFC):** Bestand › Exporteren › BIM (IFC), ook in Woning ›
+  Uitvoer. IFC4 met alleen de bouwconstructie: hout (stijlen/regels als
+  IfcMember, vloerbalken als IfcBeam, dakbalken als IfcMember), stalen
+  nokbalk, palen, platen (spaanplaat, OSB, cementplaat als IfcPlate) en
+  elektra (buis per leiding, inbouw-/lasdozen, meterkast); geen
+  gevelafwerking, latwerk, isolatie, kozijnen, dakbedekking of inrichting.
+  Geometrie uit de 3D-opbouw zelf (`HouseIfc`: fase *elektra* voor alle balken
+  en leidingen, fase *beplating* voor de platen; herkend aan het materiaal),
+  als driehoeksnet. Opbouw: unit › element (A-W1, A-V1, A-D) › onderdelen;
+  binnenwanden en elektra los in de bouwlaag. Per onderdeel `Pset_Tectum`
+  (element, onderdeel, afmeting, lengte, materiaal). Kleur per soort (op het
+  vlak en het materiaal): stijl lichthout, regel oranje, vloerbalk bruin,
+  dakbalk roodbruin, paal donkerbruin, stalen nokbalk staalblauw, spaanplaat
+  groen, OSB geel, cementplaat grijs; elektra in de app-kleuren
+  (`HouseIfc` COLORS). X = oost, Y = noord,
+  Z = 0 op peil; zuidwesthoek van de units = 0,0 (zelfde als de DXF).
+- **Render-export (OBJ):** Bestand › Exporteren › Render (OBJ), ook in Woning ›
+  Uitvoer. Voor een sfeerimpressie: alleen wat in de afgewerkte woning te zien
+  is (dak, dakrand, lampen, ruimtes, inrichting; los van de gekozen lagen,
+  doorsnede en weergave-opties; zonder buizen en dozen, binnenste vloerbalken,
+  latten en isolatie achter de gevel, lichtkegels, logobord, grond en lucht)
+  als ZIP met `.obj`, `.mtl`, `textures/*.png` (rabat, steen, riet, tegels) en
+  `<naam>_lampen.py`: in Blender uitvoeren importeert de OBJ en zet elke lamp
+  (gevellamp, dakrandspot, binnenspot) als echte spotlight met dezelfde plek,
+  richting en kegel als in de app (`LightingModel.lightSources`). Meters, Y omhoog (de
+  standaard OBJ-import van Blender zet dat goed: noord = +Y), oorsprong op
+  maaiveld onder het midden. Kleuren omgerekend van sRGB naar lineair (de app
+  heeft geen kleurbeheer, Blender wel), PBR via `Pr`/`Pm`/`d`/`Ke` (ruwheid,
+  metaal, doorzichtigheid glas, gloed lampen); textuurherhaling zit in de
+  UV's (`ObjWriter`).
 
 ## Kosten en prijzen (CSV)
 
@@ -260,6 +376,16 @@ hout.balk.38x235;Constructiehout vuren C24 38×235;€/m;4,91;Houthandel Y;;2026
 
 ## Bekende beperkingen
 
+- DXF: geen arceringen en geen lijndiktes (R12); kleuren per laag (ACI), dus
+  pendiktes via de plotstijl. Geen doorsnede en geen dakaanzicht. Eenheid
+  staat niet in het bestand: in CAD op millimeters zetten (UNITS) als het
+  pakket erom vraagt.
+- OBJ: lichtbronnen alleen via het meegeleverde Blender-script, geen
+  reliëf-/normaalkaarten; glas als doorzichtig materiaal, in Blender eventueel
+  op Glass BSDF zetten.
+- IFC: onderdelen zijn driehoeksnetten (niet parametrisch); geen
+  verbindingsmiddelen, isolatie of bekabeling (alleen buizen).
+
 - Tijdelijk (verwijderen voor productie): zaagmachine-overzicht (zaagmeters bij
   2400 m/u, zaagsneden, hoeken) in de app en op het totalenblad (`SAW_M_PER_H`).
 - Tijdelijk: een nieuwe woning is het voorbeeldontwerp "Vlinderwoning"
@@ -271,8 +397,38 @@ hout.balk.38x235;Constructiehout vuren C24 38×235;€/m;4,91;Houthandel Y;;2026
   stucwerk wit met verticaal hout aan de slaapkamerkant, binnenwanden,
   dubbele schuifdeur tussen woonkamer en hal, en complete inrichting.
   Langer maken: beide units breder (alles is vanaf de westgevel gemaat).
-  Ook via Bestand › Woning Amstel. De L-woning (8 × 3,6 m + 4,5 × 3,6 m)
-  blijft beschikbaar als "Woning L-vorm".
+  Model **Wetering** (`HouseModel.createWetering`, naar
+  `examples/ontwerp_wetering.pdf`): 10,5 × 4,8 m, twee units van 2,6 en
+  2,2 m zonder naadwand (open woonkamer over de volle diepte), verticaal
+  rabat grijs, plat dak met zwart boeideel, hoekkeuken met kookplaat,
+  badkamer, slaapkamer met kledingkast. Model **IJssel**
+  (`HouseModel.createIJssel`, naar `examples/ontwerp_ijssel.pdf`): L-vorm
+  14 × 4,6 m met een vleugel van 4,6 × 3 m, twee units met zadeldak en
+  riet die met een kil en een hoekkeper op elkaar aansluiten, stucwerk wit,
+  openslaande deuren in de westgevel. Model **Waal**
+  (`HouseModel.createWaal`, naar `examples/ontwerp_waal.pdf`): 12,85 × 7 m,
+  flauw zadeldak dat aan de oostkop 1,5 m doorloopt als veranda op eiken
+  palen (Overkapping per unit). Model **Maas** (`HouseModel.createMaas`,
+  naar `examples/ontwerp_maas.pdf`): vierkant 9,2 × 9,2 m, flauw zadeldak
+  over de hele woning; de overkapping maakt van de noordwesthoek een
+  inpandige veranda (2,5 × 4,6 m) op eiken palen. Model **Rijn**
+  (`HouseModel.createRijn`, naar `examples/ontwerp_rijn.pdf`): L-vorm
+  13 × 10 m, hoofdvolume met flauw zadeldak (twee lessenaars die op de naad
+  de nok vormen) en een vleugel met plat dak, steenstrips rondom met een
+  schoorsteen (800 mm, hart op de naad) in de oostgevel, kookeiland, logeerkamer en
+  apart toilet in de vleugel. Model **Reest** (`HouseModel.createReest`,
+  naar `examples/ontwerp_reest.pdf`): 12,9 × 7,85 m, hoofdvolume
+  11,5 × 4,8 m onder één lessenaarsdak (hoog aan de noordgevel, twee units
+  van 3,4 en 1,4 m met lessenaars in hetzelfde vlak) dat aan de westkop
+  1,4 m doorloopt als overkapping bij de voordeur, dicht met een witte
+  zijwand; aanbouw met plat dak (toilet, berging, entree met open doorgang
+  naar de woonkamer, daktrim i.p.v. boeidelen); zuidgevel en dak in
+  antraciet felsplaten (zuidrand zonder boeideel, de felsplaten lopen over
+  de zijwand door), verder verticale rabat. De standaardmodellen staan in
+  `HouseModel.MODELS`; Bestand › Snel nieuw en het venster Nieuw worden
+  daaruit opgebouwd (nieuw model = één regel plus een `create`-functie die
+  `modelKit` gebruikt). De L-woning (8 × 3,6 m + 4,5 × 3,6 m) blijft
+  beschikbaar als "Woning L-vorm".
 - Netto m² per ruimte telt de hele vloer, ook onder een laag schuin dak
   (geen NEN 2580-correctie voor hoogte < 1,5 m).
 - Units kunnen niet gedraaid worden.

css/app.css

@@ -39,30 +39,6 @@
     }
 
 
-    #app-container { display: flex; width: 100%; height: 100%; }
-
-    #left-column {
-      flex: 1;
-      display: flex;
-      flex-direction: column;
-      height: 100%;
-      min-height: 0;
-      min-width: 0;
-      border-right: 1px solid var(--border);
-    }
-
-    #right-column {
-      flex: 1;
-      display: flex;
-      flex-direction: column;
-      height: 100%;
-      min-height: 0;
-      min-width: 0;
-    }
-
-    #app-container.fullscreen-3d #left-column { display: none; }
-    #app-container.fullscreen-2d #right-column { display: none; }
-
     #pane-2d-container {
       flex: 1;
       display: flex;
@@ -85,14 +61,6 @@
     .pane-2d-half { flex: 1; position: relative; min-width: 0; min-height: 0; background: var(--viewport-bg); }
     .pane-2d-half + .pane-2d-half { border-left: 1px solid var(--border); }
 
-    #control-panel {
-      height: 380px;
-      background: var(--van-emous-ultra-light);
-      border-top: 1px solid var(--border);
-      display: flex;
-      flex-direction: column;
-    }
-
     .tab-bar {
       display: flex;
       background: var(--van-emous-blue);
@@ -148,39 +116,6 @@
     }
     .tab-content.active { display: block; }
 
-    #pane-3d { flex: 1; position: relative; min-height: 0; background: var(--viewport-bg); }
-
-    #specs-panel-3d {
-      height: 380px;
-      background: var(--van-emous-ultra-light);
-      border-top: 1px solid var(--border);
-      overflow-y: auto;
-      padding: 15px 20px;
-    }
-    #specs-panel-3d .controls-grid { grid-template-columns: 1fr 1fr; }
-
-    .toolbar-3d {
-      position: absolute;
-      top: 15px;
-      right: 15px;
-      z-index: 10;
-      display: flex;
-      gap: 8px;
-    }
-    .btn-3d-toggle {
-      background: rgba(0, 0, 0, 0.75);
-      border: 1px solid var(--primary-on-dark);
-      color: var(--primary-on-dark);
-      padding: 6px 12px;
-      border-radius: 4px;
-      font-size: 12px;
-      font-weight: bold;
-      text-transform: uppercase;
-      letter-spacing: 0.5px;
-      cursor: pointer;
-    }
-    .btn-3d-toggle.active { background: var(--primary); border-color: var(--primary); color: #fff; }
-
     .pane-label {
       position: absolute;
       top: 15px;
@@ -292,28 +227,6 @@
     .material-toggle-btn:hover:not(.active) { border-color: var(--primary); color: var(--primary); }
 html, body { height: 100%; }
 
-#tab-bar {
-  height: 34px;
-  background: var(--van-emous-ultra-light);
-  border-bottom: 1px solid var(--border);
-  display: flex;
-  align-items: stretch;
-  overflow-x: auto;
-}
-.tab-item {
-  display: flex; align-items: center; gap: 8px;
-  padding: 0 12px; font-size: 12px; color: var(--text-muted);
-  border-right: 1px solid var(--border-soft); border-bottom: 2px solid transparent; cursor: pointer; white-space: nowrap;
-}
-.tab-item:hover { color: var(--text); }
-.tab-item.active { background: var(--surface); color: var(--text); border-bottom: 2px solid var(--primary); }
-.tab-item .tab-close {
-  color: var(--text-faint); font-size: 14px; line-height: 1; padding: 2px;
-}
-.tab-item .tab-close:hover { color: var(--danger); }
-
-body { display: flex; flex-direction: column; }
-#tab-bar { flex: none; }
 #workspace { width: 100vw; flex: 1; min-height: 0; position: relative; }
 #workspace-empty {
   height: 100%; display: flex; align-items: center; justify-content: center;
@@ -428,33 +341,11 @@ body { display: flex; flex-direction: column; }
   color: var(--nav-link-color); cursor: pointer; width: 110px;
 }
 .new-option svg { width: 40px; height: 40px; }
+.new-option .bi { font-size: 36px; line-height: 40px; }
 .new-option span { font-size: 13px; }
 .new-option:hover:not(.disabled) { border-color: var(--primary); color: var(--primary); background: var(--primary-soft); }
 .new-option.disabled { opacity: .4; cursor: not-allowed; }
 
-#floor-app { display: flex; width: 100%; height: 100%; }
-#floor-left-column {
-  flex: 1; display: flex; flex-direction: column; height: 100%; min-height: 0; min-width: 0;
-  border-right: 1px solid var(--border);
-}
-#floor-right-column { flex: 1; display: flex; flex-direction: column; height: 100%; min-height: 0; min-width: 0; }
-#floor-app.fullscreen-3d #floor-left-column { display: none; }
-#floor-app.fullscreen-2d #floor-right-column { display: none; }
-#floor-pane-2d-container { flex: 1; display: flex; flex-direction: column; min-height: 0; width: 100%; }
-#floor-control-panel { height: 380px; background: var(--van-emous-ultra-light); border-top: 1px solid var(--border); display: flex; flex-direction: column; }
-#floor-control-panel .tab-content { padding: 15px 20px; overflow-y: auto; flex: 1; display: none; }
-#floor-control-panel .tab-content.active { display: block; }
-#floor-pane-3d { flex: 1; position: relative; min-height: 0; background: var(--viewport-bg); }
-#floor-specs-panel-3d {
-  height: 380px; background: var(--van-emous-ultra-light); border-top: 1px solid var(--border); overflow-y: auto; padding: 15px 20px;
-}
-#floor-specs-panel-3d .controls-grid { grid-template-columns: 1fr 1fr; }
-
-#house-app { display: flex; width: 100%; height: 100%; }
-#house-nav {
-  width: 240px; flex: none; display: flex; flex-direction: column; gap: 6px;
-  background: var(--van-emous-blue); border-right: 1px solid var(--border); padding: 10px 8px; overflow-y: auto;
-}
 .hn-title { font-size: 12px; font-weight: bold; color: var(--primary); text-transform: uppercase; letter-spacing: .8px; padding: 2px 6px 6px; }
 #house-nav-tree { display: flex; flex-direction: column; gap: 2px; }
 .hn-group { margin-top: 6px; }
@@ -474,50 +365,20 @@ body { display: flex; flex-direction: column; }
 .hn-item.disabled:hover { background: none; color: #9aa4b0; }
 .hn-actions { display: flex; gap: 6px; margin-top: 10px; }
 .hn-actions .io-btn { flex: 1; }
-#house-nav .io-status { margin: auto 0 0; padding: 6px; }
 
-#house-part-host { flex: 1; min-width: 0; min-height: 0; display: flex; flex-direction: column; }
-#house-part-host > #app-container,
-#house-part-host > #floor-app,
-#house-part-host > #house-overview { flex: 1; min-height: 0; height: auto; }
-
-#house-overview { display: flex; width: 100%; }
-.ho-views { flex: 1; display: flex; min-width: 0; min-height: 0; }
-.ho-pane { flex: 1; position: relative; min-height: 0; min-width: 0; background: var(--viewport-bg); }
-#ho-pane-plan { border-right: 1px solid var(--border); }
-@media (max-width: 1100px) {
-  .ho-views { flex-direction: column; }
-  #ho-pane-plan, .ho-report { border-right: none; border-bottom: 1px solid var(--border); }
-}
-#house-overview.fullscreen-3d #ho-pane-plan, #house-overview.fullscreen-3d .ho-report { display: none !important; }
-#house-overview.fullscreen-2d #ho-pane-3d { display: none; }
 .ho-report { display: none; flex: 1; min-width: 0; min-height: 0; overflow-y: auto; padding: 14px 18px 20px; background: var(--van-emous-ultra-light); border-right: 1px solid var(--border); }
 #house-overview.show-report .ho-report { display: block; }
 #house-overview.show-report #ho-pane-plan { display: none; }
-.ho-report .ui-spec-grid { grid-template-columns: repeat(auto-fill, minmax(290px, 1fr)); align-items: start; }
 .ho-report-head { display: flex; align-items: baseline; gap: 12px; margin-bottom: 12px; }
 .ho-report-head h1 { margin: 0; font-size: 14px; }
 .ho-report-head span { font-size: 12px; color: var(--text-muted); }
 .ho-warn { position: absolute; top: 52px; left: 15px; right: 15px; z-index: 9; pointer-events: none; }
 .ho-warn .ui-warn { margin: 0 0 6px; max-width: 560px; }
-.ho-hint {
-  position: absolute; left: 15px; bottom: 10px; font-size: 11px; color: #bbb;
-  background: rgba(0, 0, 0, .6); padding: 3px 8px; border-radius: 4px; pointer-events: none;
-}
 .ho-prop-actions { display: flex; flex-wrap: wrap; gap: 8px; margin-top: 12px; }
 .io-btn-danger { border-color: #e3b4b0; color: var(--danger); }
 .io-btn-danger:hover { border-color: var(--danger); color: var(--danger); background: var(--danger-soft); }
 .control-group input:disabled { opacity: .5; cursor: not-allowed; background: var(--border-soft); }
 
-.view-filter { position: relative; }
-.vf-menu {
-  position: absolute; right: 0; top: 100%; margin-top: 6px; min-width: 210px; display: none;
-  background: rgba(0, 0, 0, 0.88); border: 1px solid #444; border-radius: 4px; padding: 8px 12px; z-index: 20;
-}
-.vf-menu.open { display: block; }
-.vf-item { display: flex; align-items: center; gap: 8px; color: #eee; font-size: 13px; padding: 4px 0; cursor: pointer; user-select: none; }
-.vf-item input { accent-color: var(--primary-on-dark); width: 15px; height: 15px; cursor: pointer; }
-
 .bi { line-height: 1; vertical-align: -0.125em; }
 .ui-section { margin-bottom: 14px; }
 .ui-section h2, .ui-spec-card h2 {
@@ -573,7 +434,6 @@ body { display: flex; flex-direction: column; }
 .ui-tab-page { display: none; }
 .ui-tab-page.active { display: block; }
 
-.ui-spec-grid { display: grid; grid-template-columns: repeat(auto-fit, minmax(240px, 1fr)); gap: 12px; }
 .ui-spec-card { background: var(--surface); border: 1px solid var(--border-soft); border-radius: 6px; padding: 10px 12px; }
 .ui-spec-row { display: flex; justify-content: space-between; gap: 10px; font-size: 12px; padding: 3px 0; border-bottom: 1px dashed var(--border-soft); }
 .ui-spec-row:last-child { border-bottom: none; }
@@ -582,12 +442,10 @@ body { display: flex; flex-direction: column; }
 .ui-spec-total { border-top: 1px solid var(--border); margin-top: 4px; padding-top: 2px; }
 .ui-spec-total .ui-spec-val { color: var(--primary); }
 
-.btn-3d-toggle { display: inline-flex; align-items: center; gap: 6px; }
 .hn-item .bi { margin-right: 6px; color: var(--text-muted); }
 .hn-item.active .bi, .hn-item:hover .bi { color: var(--primary); }
 .hn-label { display: inline-flex; align-items: center; }
 
-.render-only #specs-panel-3d, .render-only #floor-specs-panel-3d { display: none; }
 
 .control-group { min-height: 28px; margin-bottom: 3px; gap: 10px; }
 .control-group label { font-size: 12.5px; color: var(--text); }
@@ -605,9 +463,6 @@ h1 { display: flex; align-items: center; gap: 7px; font-size: 12px; font-weight:
 .hn-title { display: flex; align-items: center; gap: 6px; }
 .file-protocol-warning { position: fixed; left: 50%; bottom: 16px; transform: translateX(-50%); z-index: 9000; max-width: 640px; box-shadow: 0 8px 20px rgba(33,33,33,.2); }
 .file-protocol-warning code { background: rgba(0,0,0,.06); padding: 0 4px; border-radius: 3px; }
-.vf-option { gap: 9px; }
-.vf-option.active { color: var(--primary-on-dark); font-weight: 600; }
-.vf-menu .vf-option:hover { color: var(--primary-on-dark); }
 
 .hs-stone-preview { display: block; width: 128px; height: auto; margin: 4px 0 8px; border: 1px solid var(--border, #ccc); border-radius: 3px; }
 
@@ -634,21 +489,13 @@ h1 { display: flex; align-items: center; gap: 7px; font-size: 12px; font-weight:
 .ui-range input[type=number] { width: 84px; }
 .ui-swatch { height: 14px; border-radius: 3px; border: 1px solid var(--border); margin: 2px 0 6px; }
 
-.stage-bar {
-  position: absolute; left: 15px; bottom: 14px; z-index: 10; min-width: 300px; max-width: calc(100% - 30px);
-  background: rgba(0, 0, 0, 0.75); border: 1px solid #444; border-radius: 6px; padding: 7px 12px 6px; color: #eee; font-size: 12px;
+.plan-zoom { position: absolute; right: 12px; bottom: 12px; z-index: 10; display: flex; flex-direction: column; gap: 4px; }
+.plan-zoom button {
+  width: 30px; height: 30px; display: flex; align-items: center; justify-content: center; cursor: pointer;
+  background: rgba(0, 0, 0, 0.75); border: 1px solid #555; border-radius: 4px; color: #eee; font-size: 14px;
 }
-.stage-row, .stage-extra { display: flex; align-items: center; gap: 10px; }
-.stage-title { display: inline-flex; align-items: center; gap: 6px; color: var(--primary-on-dark); font-weight: 600; white-space: nowrap; }
-.stage-range { flex: 1; min-width: 90px; accent-color: var(--primary-on-dark); }
-.stage-name { min-width: 84px; font-weight: 600; white-space: nowrap; }
-.stage-track { flex: 1; display: flex; flex-direction: column; min-width: 120px; }
-.stage-track .stage-range { width: 100%; margin: 0; }
-.stage-ticks { display: flex; justify-content: space-between; padding: 0 3px; font-size: 10px; color: #888; }
-.stage-ticks span { cursor: pointer; padding: 0 3px; }
-.stage-ticks span.on { color: var(--primary-on-dark); }
-.stage-extra { display: none; margin-top: 6px; padding-top: 6px; border-top: 1px solid #444; }
-.stage-extra.show { display: flex; }
+.plan-zoom button:hover { border-color: var(--primary-on-dark); color: var(--primary-on-dark); }
+.plan-zoom-val { text-align: center; font-size: 10px; color: #aaa; }
 
 .viz { --series-1: #2a78d6; --series-2: #eb6834; --series-3: #1baf7a; --track: #eef1f5; }
 .viz-legend { display: flex; flex-wrap: wrap; gap: 12px; font-size: 11px; color: var(--text-muted); margin: -2px 0 8px; }
@@ -670,72 +517,316 @@ h1 { display: flex; align-items: center; gap: 7px; font-size: 12px; font-weight:
 .viz-val { font-size: 12px; font-weight: 600; font-variant-numeric: tabular-nums; color: var(--text); text-align: right; white-space: nowrap; }
 .viz-note { font-size: 11px; color: var(--text-faint); line-height: 1.45; margin-top: 6px; }
 
-#ribbon { flex: none; background: var(--van-emous-blue); border-bottom: 1px solid var(--border); position: relative; z-index: 100; user-select: none; }
-.rb-top { display: flex; align-items: flex-end; height: 34px; padding: 0 8px; }
-.rb-brand { display: flex; align-items: center; height: 100%; padding: 0 14px 0 4px; font-weight: 700; color: var(--primary); letter-spacing: .5px; }
-.rb-tabs { display: flex; gap: 2px; height: 100%; align-items: flex-end; overflow-x: auto; scrollbar-width: none; }
-.rb-tab {
-  display: inline-flex; align-items: center; gap: 6px; height: 28px; padding: 0 14px; border: 1px solid transparent; border-bottom: none;
-  border-radius: 5px 5px 0 0; background: none; font: inherit; font-size: 12.5px; color: var(--nav-link-color); cursor: pointer; white-space: nowrap;
-}
-.rb-tab:hover { background: rgba(255, 255, 255, .55); color: var(--primary); }
-.rb-tab.active { background: var(--van-emous-ultra-light); border-color: var(--border); color: var(--primary); font-weight: 600; margin-bottom: -1px; height: 29px; }
-.rb-tab.rb-ctx { color: #fff; background: var(--primary); margin-left: 10px; }
-.rb-tab.rb-ctx:hover { background: var(--primary-hover); color: #fff; }
-.rb-tab.rb-ctx.active { background: var(--van-emous-ultra-light); color: var(--primary); box-shadow: inset 0 3px 0 var(--primary); }
-.rb-right { margin-left: auto; display: flex; align-items: center; height: 100%; gap: 10px; font-size: 11px; color: var(--text-muted); padding-left: 12px; }
-.rb-body {
-  position: relative; display: flex; align-items: stretch; height: 104px; padding: 6px 40px 4px 6px;
-  background: var(--van-emous-ultra-light); border-top: 1px solid var(--border); overflow-x: auto; overflow-y: hidden;
-}
-#ribbon.rb-collapsed .rb-body { display: none; }
-.rb-collapse { position: absolute; right: 8px; bottom: 6px; border: none; background: none; color: var(--text-faint); cursor: pointer; padding: 2px 4px; }
-.rb-collapse:hover { color: var(--primary); }
-.rb-group { display: flex; flex-direction: column; flex: none; padding: 0 12px; border-right: 1px solid var(--border-soft); }
-.rb-group:last-of-type { border-right: none; }
-.rb-group-body { flex: 1; display: grid; grid-auto-flow: column; grid-template-rows: repeat(3, 26px); column-gap: 16px; align-items: center; justify-content: start; }
-.rb-group-label { text-align: center; font-size: 10.5px; color: var(--text-faint); padding-top: 2px; white-space: nowrap; }
-.rb-btn {
-  display: inline-flex; align-items: center; gap: 6px; border: 1px solid transparent; background: none; border-radius: 4px;
-  font: inherit; font-size: 12px; color: var(--text); cursor: pointer; white-space: nowrap;
-}
-.rb-btn:hover:not(:disabled) { background: var(--primary-soft); border-color: rgba(185, 89, 19, .25); color: var(--primary); }
-.rb-btn:disabled { color: #a9b2bd; cursor: default; }
-.rb-btn.active { background: var(--primary-soft); border-color: var(--primary); color: var(--primary); }
-.rb-btn.rb-danger:hover:not(:disabled) { background: var(--danger-soft); border-color: var(--danger); color: var(--danger); }
-.rb-small { height: 24px; padding: 0 7px; }
-.rb-small .bi { font-size: 14px; color: var(--primary); }
-.rb-btn:disabled .bi { color: inherit; }
-.rb-big { grid-row: span 3; flex-direction: column; justify-content: center; gap: 4px; min-width: 64px; height: 76px; padding: 4px 8px; text-align: center; }
-.rb-big .bi { font-size: 24px; color: var(--primary); }
-.rb-big span { white-space: normal; max-width: 86px; line-height: 1.2; }
-.rb-kv { display: flex; justify-content: space-between; gap: 12px; font-size: 11.5px; color: var(--text-muted); min-width: 150px; }
-.rb-kv b { color: var(--text); font-variant-numeric: tabular-nums; }
-.rb-kv small { font-weight: normal; color: var(--text-faint); margin-left: 2px; }
-.rb-note { grid-row: span 3; max-width: 260px; font-size: 11px; line-height: 1.4; color: var(--text-muted); white-space: normal; align-self: center; }
-.rb-note.rb-warn { color: var(--danger); }
-.rb-group .ui-field { min-height: 0; height: 26px; gap: 8px; }
-.rb-group .ui-field label { font-size: 11.5px; color: var(--text-muted); white-space: nowrap; }
-.rb-group .ui-control input[type=number] { width: 70px; padding: 2px 5px; font-size: 12px; }
-.rb-group .ui-control select, .rb-group .ui-control input[type=text] { width: 132px; padding: 2px 4px; font-size: 12px; }
-.rb-group .ui-control input[type=color] { width: 46px; height: 22px; padding: 0; border: 1px solid var(--border); border-radius: 3px; background: none; }
-.rb-group .ui-unit { width: 20px; margin-left: 3px; font-size: 10.5px; }
-.rb-group .ui-switch { margin-right: 0; }
-.rb-group .ui-field-range { flex-wrap: nowrap; padding: 0; }
-.rb-group .ui-field-range label { flex: none; }
-.rb-group .ui-range { flex: none; gap: 6px; }
-.rb-group .ui-range input[type=range] { width: 96px; flex: none; }
-.rb-group .ui-range input[type=number] { width: 62px; }
-.rb-thumb { width: 26px; height: 26px; border-radius: 3px; border: 1px solid var(--border); object-fit: cover; display: block; }
-.rb-swatch { width: 26px; height: 22px; border-radius: 3px; border: 1px solid var(--border); }
-.rb-seg { display: inline-flex; border: 1px solid var(--border); border-radius: 4px; overflow: hidden; height: 24px; }
-.rb-seg .rb-btn { border-radius: 0; border: none; border-right: 1px solid var(--border-soft); height: 22px; padding: 0 8px; }
-.rb-seg .rb-btn:last-child { border-right: none; }
-.rb-seg .rb-btn.active { background: var(--primary); color: #fff; }
-.rb-seg .rb-btn.active .bi { color: #fff; }
-.rb-check { display: inline-flex; align-items: center; gap: 6px; font-size: 12px; color: var(--text); cursor: pointer; white-space: nowrap; }
-.rb-check input { accent-color: var(--primary); }
+/* ===== Shell: bovenbalk (menu + documenten), editorindeling, werkbalk, eigenschappen, statusbalk ===== */
+:root { --panel-w: 340px; --nav-w: 230px; }
+body { display: flex; flex-direction: column; }
 
-.rb-pair { display: flex; align-items: center; gap: 6px; }
-.rb-cols { grid-row: span 3; display: grid; grid-auto-flow: column; grid-template-rows: repeat(3, 26px); column-gap: 18px; align-items: center; }
-.rb-cols:empty { display: none; }
+#topbar {
+  flex: none; height: 40px; display: flex; align-items: stretch; gap: 4px; padding: 0 10px 0 4px;
+  background: var(--van-emous-blue); border-bottom: 1px solid var(--border); position: relative; z-index: 200; user-select: none;
+}
+.tb-brand { display: flex; align-items: center; padding: 0 12px 0 8px; font-weight: 700; color: var(--primary); letter-spacing: .5px; }
+#menubar { display: flex; align-items: center; }
+.mb-menu { position: relative; height: 100%; display: flex; align-items: center; }
+.mb-top { height: 28px; padding: 0 10px; border: none; background: none; border-radius: 4px; font: inherit; font-size: 13px; color: var(--text); cursor: pointer; }
+.mb-top:hover, .mb-menu.open .mb-top { background: rgba(255, 255, 255, .7); color: var(--primary); }
+.mb-drop {
+  display: none; position: absolute; top: calc(100% - 3px); left: 0; min-width: 260px; padding: 4px;
+  background: var(--surface); border: 1px solid var(--border); border-radius: 6px; box-shadow: 0 10px 28px rgba(33, 33, 33, .18); z-index: 300;
+}
+.mb-menu.open .mb-drop { display: block; }
+.mb-item {
+  display: grid; grid-template-columns: 22px 1fr auto; align-items: center; gap: 6px; width: 100%; padding: 6px 8px;
+  border: none; background: none; border-radius: 4px; font: inherit; font-size: 13px; color: var(--text); text-align: left; cursor: pointer;
+}
+.mb-item:hover:not(:disabled) { background: var(--primary-soft); color: var(--primary); }
+.mb-item:disabled { color: var(--text-faint); cursor: default; }
+.mb-ico .bi { color: var(--text-muted); }
+.mb-item:hover:not(:disabled) .mb-ico .bi, .mb-item.checked .mb-ico .bi { color: var(--primary); }
+.mb-item:disabled .mb-ico .bi { color: inherit; }
+.mb-keys { font-size: 11.5px; color: var(--text-faint); padding-left: 18px; white-space: nowrap; }
+.mb-sep { height: 1px; background: var(--border-soft); margin: 4px 6px; }
+.mb-head { font-size: 10.5px; text-transform: uppercase; letter-spacing: .6px; color: var(--text-faint); padding: 6px 8px 2px 36px; }
+
+#doc-tabs { display: flex; align-items: flex-end; gap: 2px; flex: 1; min-width: 0; margin-left: 14px; overflow: hidden; }
+.doc-tab {
+  display: flex; align-items: center; gap: 4px; flex: 0 1 auto; min-width: 70px; max-width: 220px; height: 32px; padding: 0 4px 0 12px;
+  border: 1px solid transparent; border-bottom: none; border-radius: 6px 6px 0 0; font-size: 12.5px; color: var(--text-muted); cursor: pointer;
+}
+.doc-tab:hover { background: rgba(255, 255, 255, .5); color: var(--text); }
+.doc-tab.active { background: var(--surface); border-color: var(--border); color: var(--text); font-weight: 600; height: 33px; margin-bottom: -1px; }
+.doc-name { flex: 1; min-width: 0; overflow: hidden; text-overflow: ellipsis; white-space: nowrap; }
+.doc-close { width: 20px; height: 20px; flex: none; border: none; background: none; border-radius: 4px; color: var(--text-faint); font-size: 15px; line-height: 1; cursor: pointer; }
+.doc-close:hover { background: var(--danger-soft); color: var(--danger); }
+.top-right { display: flex; align-items: center; gap: 12px; margin-left: auto; padding-left: 12px; font-size: 11px; color: var(--text-muted); white-space: nowrap; }
+.top-save {
+  display: inline-flex; align-items: center; gap: 6px; height: 28px; padding: 0 12px; border: 1px solid var(--primary); border-radius: 4px;
+  background: var(--primary); color: #fff; font: inherit; font-size: 12.5px; font-weight: 600; cursor: pointer;
+}
+.top-save:hover:not(:disabled) { background: var(--primary-hover); }
+.top-save:disabled { opacity: .45; cursor: default; }
+
+/* Editoren: [werkbalk + viewports] | paneel rechts. Dezelfde indeling voor woning, wand en vloer/dak. */
+.ed-app, #house-overview { display: flex; width: 100%; height: 100%; min-height: 0; }
+.ed-main { flex: 1; min-width: 0; min-height: 0; display: flex; flex-direction: column; }
+.ed-views, .ho-views { flex: 1; min-height: 0; min-width: 0; display: flex; }
+#left-column, #right-column, #floor-left-column, #floor-right-column { flex: 1; min-width: 0; min-height: 0; display: flex; flex-direction: column; }
+#left-column, #floor-left-column { border-right: 1px solid var(--border); }
+#floor-pane-2d-container { flex: 1; display: flex; flex-direction: column; min-height: 0; width: 100%; }
+#pane-3d, #floor-pane-3d { flex: 1; position: relative; min-height: 0; background: var(--viewport-bg); }
+.ed-app.fullscreen-3d #left-column, .ed-app.fullscreen-3d #floor-left-column { display: none; }
+.ed-app.fullscreen-2d #right-column, .ed-app.fullscreen-2d #floor-right-column { display: none; }
+.ed-panel { width: var(--panel-w); flex: none; min-height: 0; display: flex; flex-direction: column; background: var(--van-emous-ultra-light); border-left: 1px solid var(--border); }
+.ed-panel .tab-content { padding: 12px 14px; }
+.ed-panel .controls-grid { grid-template-columns: 1fr; gap: 4px; }
+.ed-panel .tab-btn { padding: 9px 4px; font-size: 12px; gap: 5px; }
+.ed-panel .io-toolbar:has(.io-status:empty) { display: none; }
+#specs-panel-3d, #floor-specs-panel-3d { padding: 0; }
+body.panels-hidden .ed-panel, body.panels-hidden #house-nav, body.panels-hidden .statusbar { display: none; }
+
+#house-app { display: flex; flex-direction: column; width: 100%; height: 100%; }
+.house-body { flex: 1; min-height: 0; display: flex; }
+#house-nav {
+  width: var(--nav-w); flex: none; display: flex; flex-direction: column; gap: 6px; padding: 10px 8px; overflow-y: auto;
+  background: var(--van-emous-blue); border-right: 1px solid var(--border);
+}
+#house-part-host { flex: 1; min-width: 0; min-height: 0; display: flex; flex-direction: column; }
+#house-part-host > .ed-app, #house-part-host > #house-overview { flex: 1; min-height: 0; height: auto; }
+.ho-pane { flex: 1; position: relative; min-height: 0; min-width: 0; background: var(--viewport-bg); }
+#ho-pane-plan { border-right: 1px solid var(--border); }
+#house-overview.fullscreen-3d #ho-pane-plan, #house-overview.fullscreen-3d .ho-report { display: none !important; }
+#house-overview.fullscreen-2d #ho-pane-3d { display: none; }
+@media (max-width: 1250px) {
+  :root { --panel-w: 300px; --nav-w: 190px; }
+  .ho-views, .ed-views { flex-direction: column; }
+  #ho-pane-plan, .ho-report, #left-column, #floor-left-column { border-right: none; border-bottom: 1px solid var(--border); }
+}
+
+.statusbar {
+  flex: none; height: 24px; display: flex; align-items: center; gap: 16px; padding: 0 12px;
+  background: var(--van-emous-blue); border-top: 1px solid var(--border); font-size: 11.5px; color: var(--text-muted);
+}
+.sb-hint { flex: 1; min-width: 0; overflow: hidden; text-overflow: ellipsis; white-space: nowrap; }
+.statusbar .io-status { white-space: nowrap; }
+
+/* Werkbalk boven de viewports */
+.ed-toolbar {
+  flex: none; display: flex; flex-wrap: wrap; align-items: center; gap: 4px; min-height: 40px; padding: 4px 8px;
+  background: var(--surface); border-bottom: 1px solid var(--border); position: relative; z-index: 20; container-type: inline-size;
+}
+.tb-group { display: flex; align-items: center; gap: 2px; }
+.tb-spacer { flex: 1; }
+.tb-sep { width: 1px; height: 22px; background: var(--border-soft); margin: 0 6px; }
+.tb-btn {
+  display: inline-flex; align-items: center; gap: 6px; height: 30px; padding: 0 9px; border: 1px solid transparent; border-radius: 5px;
+  background: none; font: inherit; font-size: 12.5px; color: var(--text); cursor: pointer; white-space: nowrap; position: relative;
+}
+.tb-btn .bi { font-size: 15px; color: var(--text-muted); }
+.tb-btn .tb-caret { font-size: 10px; }
+.tb-btn:hover { background: var(--primary-soft); color: var(--primary); }
+.tb-btn:hover .bi, .tb-btn.active .bi, .tb-btn.open .bi { color: var(--primary); }
+.tb-btn.active, .tb-btn.open { background: var(--primary-soft); border-color: var(--primary); color: var(--primary); }
+.tb-btn.flag::after { content: ''; position: absolute; top: 4px; right: 4px; width: 6px; height: 6px; border-radius: 50%; background: var(--primary); }
+.tb-title { font-size: 12.5px; font-weight: 600; padding: 0 6px; white-space: nowrap; }
+.tb-seg { display: inline-flex; border: 1px solid var(--border); border-radius: 5px; overflow: hidden; }
+.tb-seg .tb-btn { height: 28px; padding: 0 8px; border: none; border-radius: 0; }
+.tb-seg .tb-btn + .tb-btn { border-left: 1px solid var(--border-soft); }
+.tb-seg .tb-btn.active { background: var(--primary); color: #fff; }
+.tb-seg .tb-btn.active .bi { color: #fff; }
+.tb-options:empty { display: none; }
+.tb-opt { display: inline-flex; align-items: center; gap: 6px; margin-left: 4px; padding-left: 10px; border-left: 1px solid var(--border-soft); font-size: 12px; color: var(--text-muted); }
+.tb-opt select { height: 28px; max-width: 220px; padding: 0 6px; border: 1px solid var(--border); border-radius: 4px; background: var(--surface); font: inherit; font-size: 12.5px; color: var(--text); }
+.tb-range { display: none; align-items: center; gap: 6px; margin-left: 2px; font-size: 11.5px; color: var(--text-muted); font-variant-numeric: tabular-nums; }
+.tb-section.on .tb-range { display: inline-flex; }
+.tb-range input { width: 110px; accent-color: var(--primary); }
+#ho-section-val { min-width: 54px; }
+/* Smalle werkbalk: eerst de weergaveknoppen zonder tekst, daarna ook het gereedschap (titel blijft als tooltip). */
+@container (max-width: 1240px) { .tb-view .tb-btn > span, .tb-section .tb-btn > span, [data-tb="report"] > span { display: none; } }
+@container (max-width: 860px) { .tb-btn > span, .tb-opt > span { display: none; } }
+
+.tb-pop-wrap { position: relative; }
+.tb-pop {
+  display: none; position: absolute; top: calc(100% + 6px); right: 0; min-width: 170px; padding: 6px;
+  background: var(--surface); border: 1px solid var(--border); border-radius: 6px; box-shadow: 0 10px 28px rgba(33, 33, 33, .18); z-index: 50;
+}
+.tb-pop.open { display: block; }
+.pop-option {
+  display: flex; align-items: center; gap: 8px; width: 100%; padding: 6px 8px; border: none; border-radius: 4px; background: none;
+  font: inherit; font-size: 12.5px; color: var(--text); text-align: left; cursor: pointer;
+}
+.pop-option:hover { background: var(--primary-soft); color: var(--primary); }
+.pop-option.active { color: var(--primary); font-weight: 600; }
+.pop-layers { width: max-content; max-width: min(440px, 90vw); padding: 10px 12px; }
+.pop-row { display: flex; gap: 8px; margin-bottom: 6px; }
+.pop-phase { flex: 1; height: 28px; padding: 0 6px; border: 1px solid var(--border); border-radius: 4px; background: var(--surface); font: inherit; font-size: 12.5px; }
+.pop-groups { display: grid; grid-template-columns: repeat(2, minmax(170px, 1fr)); gap: 0 18px; }
+.pop-head { margin: 6px 0 2px; font-size: 10.5px; text-transform: uppercase; letter-spacing: .6px; color: var(--text-faint); }
+.pop-check { display: flex; align-items: center; gap: 7px; padding: 3px 2px; font-size: 12.5px; cursor: pointer; white-space: nowrap; }
+.pop-check:hover { color: var(--primary); }
+.pop-check input { margin: 0; accent-color: var(--primary); }
+.pop-check .bi { width: 14px; color: var(--text-muted); }
+
+/* Eigenschappenpaneel */
+.inspector { overflow-y: auto; background: var(--surface); }
+.ins-head { position: sticky; top: 0; z-index: 2; padding: 12px 14px 10px; background: var(--surface); border-bottom: 1px solid var(--border-soft); }
+.ins-crumbs { display: flex; align-items: center; gap: 4px; margin-bottom: 4px; font-size: 11.5px; color: var(--text-faint); }
+.ins-crumbs .bi { font-size: 9px; }
+.ins-crumb { padding: 0; border: none; background: none; font: inherit; color: var(--primary); cursor: pointer; }
+.ins-crumb:hover { text-decoration: underline; }
+.ins-head h2 { display: flex; align-items: center; gap: 8px; margin: 0; font-size: 15px; font-weight: 600; color: var(--text); }
+.ins-head h2 .bi { color: var(--primary); }
+.ins-sub { margin-top: 2px; font-size: 11.5px; color: var(--text-muted); }
+.ins-top { padding: 8px 14px 10px; border-bottom: 1px solid var(--border-soft); }
+.ins-summary { display: grid; grid-template-columns: 1fr 1fr; gap: 0 14px; }
+.ins-summary .ins-wide { grid-column: 1 / -1; }
+.ins-kv { display: flex; justify-content: space-between; gap: 10px; padding: 3px 0; border-bottom: 1px dashed var(--border-soft); font-size: 12px; color: var(--text-muted); }
+.ins-kv b { color: var(--text); font-weight: 600; font-variant-numeric: tabular-nums; text-align: right; }
+.ins-kv small { margin-left: 2px; font-weight: normal; color: var(--text-faint); }
+.ins-section { border-bottom: 1px solid var(--border-soft); }
+.ins-section-head {
+  display: flex; align-items: center; gap: 8px; width: 100%; padding: 10px 14px; border: none; background: none;
+  font: inherit; font-size: 13px; font-weight: 600; color: var(--text); text-align: left; cursor: pointer;
+}
+.ins-section-head:hover { background: var(--van-emous-ultra-light); color: var(--primary); }
+.ins-section-head > .bi:first-child { width: 16px; color: var(--primary); }
+.ins-section-head .bi-chevron-down { margin-left: auto; font-size: 11px; color: var(--text-faint); transition: transform .15s; }
+.ins-section.open .ins-section-head .bi-chevron-down { transform: rotate(180deg); }
+.ins-collapsible:not(.open) .ins-section-body { display: none; }
+.ins-section-body { padding: 2px 14px 12px; }
+.ins-group + .ins-group { margin-top: 8px; }
+.ins-group h3 { margin: 8px 0 4px; font-size: 10.5px; font-weight: 600; text-transform: uppercase; letter-spacing: .6px; color: var(--text-faint); }
+.ins-group-body { display: flex; flex-direction: column; gap: 2px; }
+.ins-btn {
+  display: inline-flex; align-items: center; gap: 7px; align-self: flex-start; margin: 3px 0; padding: 5px 11px;
+  border: 1px solid var(--border); border-radius: 4px; background: var(--surface); font: inherit; font-size: 12.5px; color: var(--text); cursor: pointer;
+}
+.ins-btn .bi { color: var(--primary); }
+.ins-btn:hover:not(:disabled) { border-color: var(--primary); color: var(--primary); }
+.ins-btn.active { background: var(--primary-soft); border-color: var(--primary); color: var(--primary); }
+.ins-btn:disabled { opacity: .5; cursor: default; }
+.ins-btn.ins-danger { color: var(--danger); border-color: #e3b4b0; }
+.ins-btn.ins-danger .bi { color: var(--danger); }
+.ins-btn.ins-danger:hover { background: var(--danger-soft); border-color: var(--danger); color: var(--danger); }
+.ins-group-body > .ins-btn + .ins-btn { margin-top: 0; }
+.ins-note { margin: 4px 0; font-size: 11.5px; line-height: 1.45; color: var(--text-muted); }
+.ins-note.ins-warn { padding: 6px 8px; border-radius: 4px; background: var(--danger-soft); color: var(--danger); }
+/* Staal of foto in de eenheid-kolom, zodat het veld uitlijnt met de rest. */
+.ins-pair { position: relative; }
+.ins-pair > .ins-thumb, .ins-pair > .ins-swatch { position: absolute; right: 0; top: 50%; transform: translateY(-50%); }
+.ins-thumb { width: 26px; height: 26px; display: block; border: 1px solid var(--border); border-radius: 3px; object-fit: cover; }
+.ins-swatch { width: 26px; height: 22px; border: 1px solid var(--border); border-radius: 3px; }
+.ins-check { display: flex; align-items: center; gap: 7px; padding: 3px 0; font-size: 12.5px; cursor: pointer; }
+.ins-check input { margin: 0; accent-color: var(--primary); }
+.ins-cols { display: flex; flex-direction: column; }
+.ins-cols:empty { display: none; }
+.inspector .ui-field { min-height: 30px; }
+.inspector .ui-control input[type=number] { width: 96px; }
+.inspector .ui-control select, .inspector .ui-control input[type=text] { width: 150px; }
+.inspector .ui-control input[type=color] { width: 46px; height: 24px; padding: 0; border: 1px solid var(--border); border-radius: 3px; background: none; }
+.inspector .ui-switch { margin-right: 0; }
+.inspector .ui-range input[type=number] { width: 80px; }
+
+/* Dialogen */
+.dlg-overlay { position: fixed; inset: 0; z-index: 500; display: none; align-items: center; justify-content: center; background: rgba(33, 33, 33, .45); }
+.dlg-overlay.open { display: flex; }
+.dlg {
+  display: flex; flex-direction: column; width: 780px; max-width: 94%; max-height: 88vh;
+  background: var(--surface); border: 1px solid var(--border); border-radius: 8px; box-shadow: 0 12px 30px rgba(33, 33, 33, .2);
+}
+.dlg-head { display: flex; justify-content: space-between; align-items: center; padding: 16px 20px 8px; }
+.dlg-head h2 { margin: 0; font-size: 15px; color: var(--primary); }
+.dlg-x { border: none; background: none; font-size: 20px; line-height: 1; color: var(--text-faint); cursor: pointer; }
+.dlg-x:hover { color: var(--danger); }
+.keys-body { overflow-y: auto; padding: 4px 20px 18px; columns: 2 300px; column-gap: 28px; }
+.keys-body section { break-inside: avoid; margin-bottom: 14px; }
+.keys-body h3 { margin: 0 0 6px; font-size: 11px; text-transform: uppercase; letter-spacing: .6px; color: var(--text-faint); }
+.keys-row { display: flex; justify-content: space-between; gap: 12px; padding: 3px 0; border-bottom: 1px dashed var(--border-soft); font-size: 12.5px; }
+.keys-row span:last-child { color: var(--text-muted); text-align: right; }
+kbd {
+  display: inline-block; min-width: 20px; padding: 1px 6px; border: 1px solid var(--border); border-bottom-width: 2px; border-radius: 4px;
+  background: var(--van-emous-ultra-light); font: 11.5px/1.5 ui-monospace, SFMono-Regular, Menlo, monospace; color: var(--text); text-align: center;
+}
+#new-modal { max-width: 92vw; }
+.new-options { flex-wrap: wrap; max-width: 640px; }
+.keys-mouse { font-weight: 600; color: var(--text); }
+#house-nav { overflow-x: hidden; }
+.hn-item { min-width: 0; }
+.hn-label { display: block; min-width: 0; overflow: hidden; text-overflow: ellipsis; white-space: nowrap; }
+.hn-meta { flex: none; max-width: 45%; overflow: hidden; text-overflow: ellipsis; white-space: nowrap; }
+/* Structuur: inklapbare groepen */
+.hn-item { align-items: center; }
+.hn-item .hn-label { flex: 1; }
+.hn-group:not(.open) .hn-children { display: none; }
+.hn-head { cursor: pointer; }
+.hn-head:hover { color: var(--primary); background: rgba(255, 255, 255, .6); }
+.hn-toggle {
+  flex: none; width: 18px; height: 18px; margin: 0 2px 0 -4px; padding: 0; display: inline-flex; align-items: center; justify-content: center;
+  border: none; border-radius: 3px; background: none; color: var(--text-faint); cursor: pointer;
+}
+.hn-toggle .bi { margin: 0 !important; font-size: 10px; color: inherit !important; transition: transform .15s; }
+.hn-group.open > .hn-item .hn-toggle .bi { transform: rotate(90deg); }
+.hn-toggle:hover { background: rgba(255, 255, 255, .8); color: var(--primary); }
+.hn-sub { padding-left: 30px; }
+
+/* Masonry: kaarten in de kortste kolom (leesvolgorde blijft links → rechts) */
+.ui-masonry { display: flex; align-items: flex-start; gap: 12px; }
+.ui-masonry-col { flex: 1; min-width: 0; display: flex; flex-direction: column; gap: 12px; }
+
+/* ===== Gelijktrekken oude onderdelen met de nieuwe stijl ===== */
+.io-btn { display: inline-flex; align-items: center; gap: 6px; padding: 5px 11px; font-family: inherit; font-size: 12px; }
+.ui-btn.ui-btn-primary:hover { background: var(--primary-hover); border-color: var(--primary-hover); color: #fff; }
+
+/* Viewportlabels: herkenbaar maar niet dominant */
+.pane-label {
+  top: 10px; left: 10px; padding: 3px 8px; border: none; border-radius: 4px; background: rgba(0, 0, 0, .55);
+  font-size: 11px; font-weight: 600; letter-spacing: .8px; color: #c9ced6;
+}
+.ho-warn { top: 40px; left: 10px; right: 10px; }
+
+/* Eigenschappenpaneel: getal naast schuif lijnt uit met gewone getalvelden; bredere keuzelijsten */
+.inspector .ui-range { gap: 0; }
+.inspector .ui-range input[type=range] { margin-right: 10px; }
+.inspector .ui-range input[type=number], .inspector .ui-control input[type=number] { width: 96px; }
+.inspector .ui-control select, .inspector .ui-control input[type=text] { width: 170px; }
+.inspector .ui-field label { flex: 1; min-width: 0; }
+
+/* Rapport- en resultaatkaarten: lange waarde schuift onder het label i.p.v. het label te pletten */
+.ui-spec-row { flex-wrap: wrap; }
+.ui-spec-val { margin-left: auto; }
+
+/* Wand-/vloerpaneel: koppen, velden en knoppen zoals het eigenschappenpaneel */
+.ed-panel h1 { margin: 12px 0 4px; font-size: 10.5px; font-weight: 600; text-transform: uppercase; letter-spacing: .6px; color: var(--text-faint); }
+.ed-panel h1 .bi { display: none; }
+.ed-panel .tab-content > :first-child h1:first-child, .ed-panel .controls-grid > div:first-child > h1:first-child { margin-top: 2px; }
+.ed-panel .spec-section h1 { margin: 0 0 6px; font-size: 12px; color: var(--primary); letter-spacing: .6px; }
+.ed-panel .spec-section h1 .bi { display: inline; }
+.ed-panel .divider { border: none; margin: 4px 0; }
+.ed-panel .control-group label { flex: 1; min-width: 0; line-height: 1.3; }
+.ed-panel .control-group > div { display: flex; align-items: center; flex: none; white-space: nowrap; }
+.ed-panel .control-group .unit { display: inline-block; width: 22px; margin-left: 3px; }
+.ed-panel .control-group > div > select:last-child, .ed-panel .control-group > div > input:last-child { margin-right: 25px; }
+.ed-panel .control-group .ui-switch { margin-right: 25px; }
+.ed-panel .control-group input[type=number], .ed-panel .control-group input[type=text], .ed-panel .control-group select { width: 110px; }
+.ed-panel .material-info { font-size: 11.5px; }
+
+.material-toggle-group { flex-wrap: wrap; }
+.material-toggle-btn {
+  flex: 1 1 auto; min-width: 0; padding: 6px 10px; border-radius: 4px; text-transform: none; letter-spacing: 0;
+  font-family: inherit; font-size: 12.5px; font-weight: 500;
+}
+.material-toggle-btn:disabled { opacity: .55; cursor: not-allowed; }
+
+.add-opening-btn {
+  width: 100%; justify-content: center; padding: 7px 10px; background: var(--surface); border: 1px dashed var(--border);
+  color: var(--text); font-weight: 500; font-family: inherit;
+}
+.add-opening-btn .bi { color: var(--primary); }
+.add-opening-btn:hover { background: var(--primary-soft); border-color: var(--primary); color: var(--primary); }
+.opening-card-title { text-transform: none; letter-spacing: 0; font-size: 13px; color: var(--text); }
+.opening-remove-btn { border-color: transparent; color: var(--text-faint); }
+.opening-remove-btn:hover { border-color: var(--danger); color: var(--danger); }
+#cost-settings-modal .cs-row input, #cost-settings-modal .cs-row select {
+  padding: 4px 6px; border: 1px solid var(--border); border-radius: 4px; background: var(--surface); font: inherit; font-size: 12.5px; color: var(--text);
+}
+#cost-settings-modal .cs-row input:focus, #cost-settings-modal .cs-row select:focus { border-color: var(--primary); outline: none; box-shadow: 0 0 0 2px var(--primary-soft); }
+#cost-settings-modal .cs-row input:disabled, #cost-settings-modal .cs-row input[readonly] { background: var(--border-soft); }

index.html

@@ -22,15 +22,23 @@
     <div class="splash-version"><span class="splash-name">Tectum</span> &mdash; Versie <span class="app-version-number">0.0.0</span></div>
   </div>
 
-  <header id="ribbon">
-    <div class="rb-top">
-      <div class="rb-brand"><span class="splash-name">Tectum</span></div>
-      <div class="rb-tabs" role="tablist"></div>
-      <div class="rb-right"><span class="app-version-slot"></span></div>
+  <header id="topbar">
+    <div class="tb-brand"><span class="splash-name">Tectum</span></div>
+    <nav id="menubar" aria-label="Menu"></nav>
+    <div id="doc-tabs" role="tablist" aria-label="Geopende ontwerpen"></div>
+    <div class="top-right">
+      <button type="button" id="top-save" class="top-save" title="Opslaan als JSON + PDF (Ctrl+S)"><i class="bi bi-save"></i><span>Opslaan</span></button>
+      <span class="app-version-slot"></span>
     </div>
-    <div class="rb-body"></div>
   </header>
 
+  <div id="keys-overlay" class="dlg-overlay">
+    <div class="dlg" role="dialog" aria-labelledby="keys-title">
+      <div class="dlg-head"><h2 id="keys-title">Sneltoetsen en bediening</h2><button type="button" class="dlg-x" data-close>&times;</button></div>
+      <div class="keys-body" id="keys-body"></div>
+    </div>
+  </div>
+
   <div id="about-overlay">
     <div id="about-modal">
       <img class="about-logo" src="assets/logo.svg" alt="Van Emous Mantelzorgwoningen">
@@ -42,19 +50,15 @@
       <div class="license-box" id="about-license"></div>
       <div class="about-footer">
         <span>&copy; 2026 Machiel Heinen &middot; ontwikkeld in opdracht van Van Emous Mantelzorgwoningen</span>
-        <button id="about-close" class="about-close">Sluiten</button>
+        <button id="about-close" class="about-close" data-esc>Sluiten</button>
       </div>
     </div>
   </div>
 
   <div id="new-overlay">
     <div id="new-modal">
-      <h2>Nieuw</h2>
+      <h2>Nieuw ontwerp</h2>
       <div class="new-options">
-        <button class="new-option" data-kind="woning" data-template="amstel">
-          <svg viewBox="0 0 48 48"><rect x="6" y="10" width="36" height="14" fill="none" stroke="currentColor" stroke-width="2"/><path d="M6 24 L6 38 L38 38 L38 24" fill="none" stroke="currentColor" stroke-width="2"/><rect x="38" y="24" width="4" height="14" fill="none" stroke="currentColor" stroke-width="1" stroke-dasharray="2 2"/><line x1="22" y1="24" x2="22" y2="38" stroke="currentColor" stroke-width="1"/></svg>
-          <span>Woning Amstel</span>
-        </button>
         <button class="new-option" data-kind="woning" data-template="single">
           <svg viewBox="0 0 48 48"><rect x="8" y="14" width="32" height="20" fill="none" stroke="currentColor" stroke-width="2"/><line x1="8" y1="24" x2="40" y2="24" stroke="currentColor" stroke-width="1" stroke-dasharray="2 2"/></svg>
           <span>Woning</span>
@@ -71,36 +75,36 @@
           <svg viewBox="0 0 48 48"><rect x="6" y="6" width="36" height="36" fill="none" stroke="currentColor" stroke-width="2"/><line x1="6" y1="18" x2="42" y2="18" stroke="currentColor" stroke-width="2"/><line x1="6" y1="30" x2="42" y2="30" stroke="currentColor" stroke-width="2"/><line x1="18" y1="6" x2="18" y2="42" stroke="currentColor" stroke-width="2"/><line x1="30" y1="6" x2="30" y2="42" stroke="currentColor" stroke-width="2"/></svg>
           <span>Los: vloer</span>
         </button>
-        <button class="new-option disabled" data-kind="dak" disabled title="Nog niet beschikbaar">
-          <svg viewBox="0 0 48 48"><path d="M4 30 L24 8 L44 30" fill="none" stroke="currentColor" stroke-width="2"/><line x1="10" y1="30" x2="38" y2="30" stroke="currentColor" stroke-width="2"/></svg>
-          <span>Dak</span>
-        </button>
       </div>
     </div>
   </div>
 
-  <div id="tab-bar"></div>
   <div id="workspace"></div>
 
   <script src="js/core/license.js"></script>
   <script src="js/core/logo-data.js"></script>
   <script src="js/core/geometry.js"></script>
-  <script src="js/core/build-stages.js"></script>
+  <script src="js/core/view-layers.js"></script>
   <script src="js/core/canvas-labels.js"></script>
   <script src="js/core/camera-memory.js"></script>
   <script src="js/core/walk-controls.js"></script>
-  <script src="js/core/view-filter.js"></script>
   <script src="js/core/ui-kit.js"></script>
-  <script src="js/core/ribbon.js"></script>
+  <script src="js/core/menubar.js"></script>
+  <script src="js/core/inspector.js"></script>
   <script src="js/core/skybox.js"></script>
   <script src="js/vendor/jspdf.umd.min.js"></script>
   <script src="js/core/pdf-sheet.js"></script>
+  <script src="js/core/dxf-writer.js"></script>
+  <script src="js/core/ifc-writer.js"></script>
+  <script src="js/core/zip-writer.js"></script>
+  <script src="js/core/obj-writer.js"></script>
   <script src="js/wall/kozijn-model.js"></script>
   <script src="js/wall/wall-model.js"></script>
   <script src="js/wall/wall-pdf.js"></script>
   <script src="js/floor/floor-model.js"></script>
   <script src="js/floor/floor-pdf.js"></script>
   <script src="js/roof/roof-model.js"></script>
+  <script src="js/roof/post-model.js"></script>
   <script src="js/lighting/lighting-model.js"></script>
   <script src="js/elektra/elektra-model.js"></script>
   <script src="js/sandwich/sandwich-model.js"></script>
@@ -109,6 +113,7 @@
   <script src="js/unit/unit-model.js"></script>
   <script src="js/room/room-model.js"></script>
   <script src="js/interior/fixture-model.js"></script>
+  <script src="js/house/chimney-model.js"></script>
   <script src="js/house/house-model.js"></script>
   <script src="js/cost/cost-defaults.js"></script>
   <script src="js/cost/cost-csv.js"></script>
@@ -116,6 +121,8 @@
   <script src="js/cost/cost-settings.js"></script>
   <script src="js/elektra/elektra-pdf.js"></script>
   <script src="js/house/house-pdf.js"></script>
+  <script src="js/house/house-dxf.js"></script>
+  <script src="js/house/house-ifc.js"></script>
   <script src="js/house/house.js"></script>
   <script src="js/app.js"></script>
 </body>

js/app.js

@@ -4,7 +4,7 @@
  * Alle rechten voorbehouden. Gebruik uitsluitend met schriftelijke toestemming.
  * Zie LICENTIE.md.
  */
-const APP_VERSION = '0.6.0';
+const APP_VERSION = '0.7.3';
 // 0.0.X per kleine iteratie, 0.X.0 per mijlpaal, X.0.0 bij live-gang.
 
 let tabs = [];
@@ -28,68 +28,83 @@ function defaultNameFor(kind) {
 function setWorkspaceEmpty() {
   document.getElementById('workspace').innerHTML = `<div id="workspace-empty">
     <div>Geen ontwerp geopend.</div>
-    <div style="font-size:11px;">Bestand &rarr; Nieuw &rarr; kies een objecttype</div>
+    <div style="font-size:12px;">Bestand &rsaquo; Nieuw (Ctrl+N)</div>
   </div>`;
 }
 
-function updateEditMenuState() {
-  Ribbon.refresh();
+const editorHas = (fn) => !!(currentEditor && typeof currentEditor[fn] === 'function' && (!currentEditor.can || currentEditor.can(fn)));
+const editorCall = (fn, ...args) => { if (editorHas(fn)) return currentEditor[fn](...args); };
+const viewState = () => editorCall('viewState') || {};
+
+// Menu met de sneltoets per item; KEY_HELP hieronder is het overzicht (Help › Sneltoetsen). Editor-acties werken alleen als de editor ze kent.
+const MENUS = [
+  { label: 'Bestand', items: [
+    { label: 'Nieuw…', icon: 'file-earmark-plus', keys: 'Ctrl+N', run: openNewModal },
+    { label: 'Openen…', icon: 'folder2-open', keys: 'Ctrl+O', run: () => editorCall('triggerImport'), enabled: () => editorHas('triggerImport') },
+    { label: 'Opslaan (JSON + PDF)', icon: 'save', keys: 'Ctrl+S', run: () => editorCall('exportDesign'), enabled: () => editorHas('exportDesign') },
+    { sep: true }, { head: 'Exporteren' },
+    { label: 'CAD (DXF)', icon: 'vector-pen', run: () => editorCall('exportDxf'), enabled: () => editorHas('exportDxf') },
+    { label: 'BIM (IFC)', icon: 'boxes', run: () => editorCall('exportIfc'), enabled: () => editorHas('exportIfc') },
+    { label: 'Render (OBJ)', icon: 'badge-3d', run: () => editorCall('exportObj'), enabled: () => editorHas('exportObj') },
+    { sep: true },
+    { label: 'Projectgegevens…', icon: 'card-text', run: () => editorCall('openProjectProperties'), enabled: () => editorHas('openProjectProperties') },
+    { label: 'Kosten & tijden…', icon: 'calculator', run: () => CostSettings.open() },
+    { sep: true },
+    { label: 'Ontwerp sluiten', icon: 'x-lg', run: () => activeTabId !== null && closeTab(activeTabId), enabled: () => activeTabId !== null }
+  ] },
+  { label: 'Beeld', items: [
+    ...UI.VIEWS.map(v => ({ label: v.label, icon: v.icon, keys: v.key1, run: () => editorCall('setView', v.key),
+      enabled: () => editorHas('setView'), checked: () => viewState().view === v.key })),
+    { label: 'Rapport', icon: 'clipboard-data', keys: '4', run: () => editorCall('toggleReport'), enabled: () => editorHas('toggleReport'), checked: () => !!viewState().report },
+    { sep: true },
+    { label: 'Doorsnede', icon: 'scissors', keys: 'X', run: () => editorCall('toggleSection'), enabled: () => editorHas('toggleSection'), checked: () => !!viewState().section },
+    { label: 'Plattegrond passend', icon: 'aspect-ratio', keys: 'F', run: () => editorCall('fitView'), enabled: () => editorHas('fitView') },
+    { label: 'Lopen', icon: 'person-walking', keys: 'L', run: () => editorCall('toggleWalk'), enabled: () => editorHas('toggleWalk'), checked: () => !!viewState().walk },
+    { sep: true },
+    { label: 'Panelen verbergen', icon: 'layout-sidebar-inset', keys: 'Ctrl+\\', run: togglePanels, checked: () => document.body.classList.contains('panels-hidden') },
+    { label: 'Volledig scherm', icon: 'fullscreen', keys: 'F11', run: toggleBrowserFullscreen, checked: () => !!document.fullscreenElement }
+  ] },
+  { label: 'Help', items: [
+    { label: 'Sneltoetsen en bediening', icon: 'keyboard', keys: '?', run: openKeys },
+    { label: 'Over Tectum', icon: 'info-circle', run: () => document.getElementById('about-overlay').classList.add('open') }
+  ] }
+];
+
+const KEY_HELP = [
+  ['Bestand', [['Ctrl+N', 'Nieuw ontwerp'], ['Ctrl+O', 'Openen'], ['Ctrl+S', 'Opslaan (JSON + PDF)']]],
+  ['Gereedschap (woning)', [['V', 'Selecteren'], ['W', 'Binnenwand tekenen'], ['R', 'Ruimte vullen'], ['I', 'Inrichting plaatsen'],
+    ['Esc', 'Gereedschap stoppen, daarna selectie opheffen'], ['Del', 'Selectie verwijderen'], ['D / Shift+D', 'Inrichting draaien'], ['Dubbelklik', 'Onderdeel bewerken (wand, vloer)']]],
+  ['Beeld', [['1 / 2 / 3', '2D + 3D, alleen 2D, alleen 3D'], ['4', 'Rapport aan/uit'], ['X', 'Doorsnede aan/uit'], ['F', 'Plattegrond passend'],
+    ['L', 'Lopen aan/uit'], ['Ctrl+\\', 'Panelen verbergen'], ['F11', 'Volledig scherm']]],
+  ['Wand-editor', [['Shift+H', 'Horizontaal spiegelen']]],
+  ['3D rondkijken', [['Slepen', 'Draaien'], ['Rechts slepen', 'Verschuiven'], ['Scrollwiel', 'Zoomen']], true],
+  ['Plattegrond', [['Scrollwiel', 'Zoomen'], ['Slepen op lege plek', 'Verschuiven'], ['Middelste muisknop', 'Verschuiven']], true],
+  ['Lopen', [['W / S', 'Vooruit / achteruit (ook pijl op/neer)'], ['A / D', 'Opzij'], ['← / →', 'Draaien'], ['Shift', 'Rennen'], ['E', 'Deur of schakelaar bedienen'], ['L / Esc', 'Stoppen met lopen']]],
+  ['Rondkijken tijdens lopen', [['Slepen', 'Rondkijken']], true]
+];
+
+function openKeys() {
+  // Muisacties als tekst, toetsen als <kbd>.
+  document.getElementById('keys-body').innerHTML = KEY_HELP.map(([title, rows, mouse]) =>
+    `<section><h3>${title}</h3>${rows.map(([k, d]) => `<div class="keys-row"><span>${mouse ? `<span class="keys-mouse">${k}</span>`
+      : k.split(' / ').map(x => `<kbd>${x}</kbd>`).join(' / ')}</span><span>${d}</span></div>`).join('')}</section>`).join('');
+  document.getElementById('keys-overlay').classList.add('open');
 }
 
-const editorHas = (fn) => !!(currentEditor && typeof currentEditor[fn] === 'function');
-const editorCall = (fn) => { if (editorHas(fn)) currentEditor[fn](); };
-const disabledUnless = (fn) => editorHas(fn) ? '' : 'disabled';
-
-function appRibbonTabs() {
-  const { big, small } = Ribbon;
-  const wireClicks = (body) => body.querySelectorAll('[data-app]').forEach(b => b.addEventListener('click', () => {
-    const a = b.dataset.app;
-    if (a === 'new') openNewModal();
-    else if (a === 'new-kind') openNew(b.dataset.kind, b.dataset.template);
-    else if (a === 'fullscreen') toggleBrowserFullscreen();
-    else if (a === 'costs') CostSettings.open();
-    else if (a === 'about') document.getElementById('about-overlay').classList.add('open');
-    else editorCall(a);
-  }));
-  return [
-    { key: 'bestand', label: 'Bestand', order: 0, wire: wireClicks, groups: () => [
-      { label: 'Document', html:
-        big('Nieuw', 'file-earmark-plus', 'data-app="new" title="Nieuw ontwerp (Ctrl+N)"') +
-        big('Openen', 'folder2-open', `data-app="triggerImport" title="JSON-ontwerp openen" ${disabledUnless('triggerImport')}`) +
-        big('Opslaan', 'save', `data-app="exportDesign" title="Opslaan als JSON + PDF (Ctrl+S)" ${disabledUnless('exportDesign')}`) },
-      { label: 'Snel nieuw', html:
-        small('Woning Amstel', 'house-heart', 'data-app="new-kind" data-kind="woning" data-template="amstel"') +
-        small('Woning', 'house', 'data-app="new-kind" data-kind="woning" data-template="single"') +
-        small('Woning L-vorm', 'bounding-box-circles', 'data-app="new-kind" data-kind="woning" data-template="L"') +
-        small('Los: muur', 'bricks', 'data-app="new-kind" data-kind="muur"') +
-        small('Los: vloer', 'grid-3x3', 'data-app="new-kind" data-kind="vloer"') },
-      { label: 'Project', html: big('Eigenschappen', 'card-text', `data-app="openProjectProperties" title="Projectgegevens voor de PDF" ${disabledUnless('openProjectProperties')}`) }
-    ] },
-    { key: 'beeld', label: 'Beeld', order: 80, wire: wireClicks, groups: () => [
-      { label: 'Venster', html:
-        small('Volledig scherm', 'fullscreen', 'data-app="fullscreen" title="F"') +
-        small('3D groot', 'badge-3d', `data-app="toggleFullscreen3D" title="T: standaard → 3D groot → alleen render" ${disabledUnless('toggleFullscreen3D')}`) +
-        small('2D groot', 'aspect-ratio', `data-app="toggleFullscreen2D" title="R" ${disabledUnless('toggleFullscreen2D')}`) },
-      { label: 'Camera', html:
-        big('Lopen', 'person-walking', `data-app="toggleWalk" title="Shift+T. W/S of pijltjes: vooruit/achteruit · A/D: opzij · pijl links/rechts: draaien · Shift: rennen · slepen: rondkijken" ${disabledUnless('toggleWalk')}`) +
-        small('Bediening', 'mouse', 'title="Rondom: slepen = draaien · rechts slepen = verschuiven · scrollwiel = zoomen. Lopen: Shift+T."') }
-    ] },
-    { key: 'extra', label: 'Extra', order: 90, wire: wireClicks, groups: () => [
-      { label: 'Bewerken', html: small('Horizontaal spiegelen', 'symmetry-vertical', `data-app="mirrorHorizontal" title="H" ${disabledUnless('mirrorHorizontal')}`) },
-      { label: 'Instellingen', html: big('Kosten & tijden', 'calculator', 'data-app="costs"') },
-      { label: 'Info', html: big('Over Tectum', 'info-circle', 'data-app="about"') }
-    ] }
-  ];
+function togglePanels() {
+  document.body.classList.toggle('panels-hidden');
+  window.dispatchEvent(new Event('resize'));
 }
 
 function renderTabBar() {
-  const bar = document.getElementById('tab-bar');
+  const bar = document.getElementById('doc-tabs');
   bar.innerHTML = tabs.map(tab => `
-    <div class="tab-item ${tab.id === activeTabId ? 'active' : ''}" data-tab-id="${tab.id}">
-      <span class="tab-name">${tab.name}</span>
-      <span class="tab-close" data-close-id="${tab.id}">&times;</span>
+    <div class="doc-tab ${tab.id === activeTabId ? 'active' : ''}" data-tab-id="${tab.id}" role="tab" aria-selected="${tab.id === activeTabId}" title="${UI.esc(tab.name)}">
+      <span class="doc-name">${UI.esc(tab.name)}</span>
+      <button type="button" class="doc-close" data-close-id="${tab.id}" title="Sluiten" aria-label="Sluiten">&times;</button>
     </div>
   `).join('');
+  document.getElementById('top-save').disabled = !editorHas('exportDesign');
 }
 
 function onTabSaved(tab, filenameWithExt) {
@@ -102,7 +117,6 @@ function onTabSaved(tab, filenameWithExt) {
 function mountEditorForTab(tab) {
   const ws = document.getElementById('workspace');
   ws.innerHTML = '';
-  Ribbon.setSource('editor', []);
   currentEditor = editorModuleFor(tab.kind).mount(ws, { onSaved: (filename) => onTabSaved(tab, filename), template: tab.template, cameraKey: 'tab' + tab.id });
   if (tab.stateJson && typeof currentEditor.loadStateJson === 'function') {
     currentEditor.loadStateJson(tab.stateJson);
@@ -120,7 +134,6 @@ function switchToTab(tabId) {
 
   activeTabId = tabId;
   mountEditorForTab(tabs.find(t => t.id === tabId));
-  updateEditMenuState();
   renderTabBar();
 }
 
@@ -138,7 +151,6 @@ function openNew(kind, template) {
   tabs.push(tab);
   activeTabId = tab.id;
   mountEditorForTab(tab);
-  updateEditMenuState();
   renderTabBar();
 }
 
@@ -179,17 +191,15 @@ function closeTab(tabId) {
     switchToTab(tabs[tabs.length - 1].id);
   } else {
     setWorkspaceEmpty();
-    Ribbon.setSource('editor', []);
-    updateEditMenuState();
     renderTabBar();
   }
 }
 
 function wireTabBar() {
-  document.getElementById('tab-bar').addEventListener('click', (e) => {
-    const closeBtn = e.target.closest('.tab-close');
+  document.getElementById('doc-tabs').addEventListener('click', (e) => {
+    const closeBtn = e.target.closest('.doc-close');
     if (closeBtn) { closeTab(parseInt(closeBtn.dataset.closeId, 10)); return; }
-    const item = e.target.closest('.tab-item');
+    const item = e.target.closest('.doc-tab');
     if (item) switchToTab(parseInt(item.dataset.tabId, 10));
   });
 }
@@ -213,6 +223,8 @@ function wireAbout() {
 
 function wireNewModal() {
   const overlay = document.getElementById('new-overlay');
+  overlay.querySelector('.new-options').insertAdjacentHTML('afterbegin', Object.entries(HouseModel.MODELS).map(([key, m]) =>
+    `<button class="new-option" data-kind="woning" data-template="${key}"><i class="bi bi-${m.icon}"></i><span>${m.label}</span></button>`).join(''));
   overlay.addEventListener('click', (e) => { if (e.target === overlay) overlay.classList.remove('open'); });
   document.querySelectorAll('.new-option:not(.disabled)').forEach(opt => {
     opt.addEventListener('click', () => {
@@ -231,41 +243,54 @@ function toggleBrowserFullscreen() {
   else document.documentElement.requestFullscreen();
 }
 
+// Alle dialogen; Esc gebruikt hun Annuleren-knop (data-esc), zodat bijv. projectgegevens worden teruggezet.
+const OVERLAYS = '.dlg-overlay.open, #about-overlay.open, #new-overlay.open, #house-project-overlay.open, #wall-project-overlay.open, #cost-settings-overlay.open';
+function closeOverlays() {
+  const open = document.querySelector(OVERLAYS);
+  if (open) {
+    const cancel = open.querySelector('[data-esc]');
+    if (cancel) cancel.click(); else open.classList.remove('open');
+    return true;
+  }
+  return Menubar.close() || UI.closePopovers();
+}
+
 function wireHotkeys() {
   document.addEventListener('keydown', (e) => {
     const inField = ['INPUT', 'SELECT', 'TEXTAREA'].includes(document.activeElement.tagName);
-
-    if (e.ctrlKey && e.key.toLowerCase() === 's') {
-      e.preventDefault();
-      if (currentEditor && typeof currentEditor.exportDesign === 'function') currentEditor.exportDesign();
+    const k = e.key.toLowerCase();
+    // Dialoog open: alleen Esc (sluiten); geen sneltoetsen naar de editor erachter. Typen in de dialoog blijft werken.
+    if (document.querySelector(OVERLAYS)) {
+      if (e.key === 'Escape') closeOverlays();
+      e.stopImmediatePropagation();
       return;
     }
-    if (e.ctrlKey && e.key.toLowerCase() === 'n') {
-      e.preventDefault();
-      openNewModal();
+    if (e.ctrlKey || e.metaKey) {
+      const act = { s: () => editorCall('exportDesign'), n: openNewModal, o: () => editorCall('triggerImport'), '\\': togglePanels }[k];
+      if (act && !e.altKey && !e.shiftKey) { e.preventDefault(); act(); }
       return;
     }
-    if (inField || e.ctrlKey || e.metaKey || e.altKey) return;
-
-    if (e.key.toLowerCase() === 'f') {
-      toggleBrowserFullscreen();
-    } else if (e.key.toLowerCase() === 'h') {
-      if (currentEditor && typeof currentEditor.mirrorHorizontal === 'function') currentEditor.mirrorHorizontal();
-    } else if (e.key.toLowerCase() === 't' && e.shiftKey) {
-      if (currentEditor && typeof currentEditor.toggleWalk === 'function') currentEditor.toggleWalk();
-    } else if (e.key.toLowerCase() === 't') {
-      if (currentEditor && typeof currentEditor.toggleFullscreen3D === 'function') currentEditor.toggleFullscreen3D();
-    } else if (e.key.toLowerCase() === 'r') {
-      if (currentEditor && typeof currentEditor.toggleFullscreen2D === 'function') currentEditor.toggleFullscreen2D();
-    }
-  });
+    if (e.key === 'Escape' && closeOverlays()) { e.stopImmediatePropagation(); return; }
+    if (inField || e.altKey || viewState().walk && !['l', 'escape'].includes(k)) return;
+    const view = UI.VIEWS.find(v => v.key1 === e.key);
+    if (view) editorCall('setView', view.key);
+    else if (e.key === '4') editorCall('toggleReport');
+    else if (k === 'x') editorCall('toggleSection');
+    else if (k === 'f') editorCall('fitView');
+    else if (k === 'l') editorCall('toggleWalk');
+    else if (k === 'h' && e.shiftKey) editorCall('mirrorHorizontal');
+    else if (e.key === '?') openKeys();
+  }, true);
 }
 
 document.addEventListener('DOMContentLoaded', () => {
   document.querySelectorAll('.app-version-slot').forEach(el => { el.textContent = 'v' + APP_VERSION; });
   document.querySelectorAll('.app-version-number').forEach(el => { el.textContent = APP_VERSION; });
-  Ribbon.init(document.getElementById('ribbon'));
-  Ribbon.setSource('app', appRibbonTabs());
+  Menubar.init(document.getElementById('menubar'), MENUS);
+  document.getElementById('top-save').addEventListener('click', () => editorCall('exportDesign'));
+  document.getElementById('keys-overlay').addEventListener('click', (e) => {
+    if (e.target.id === 'keys-overlay' || e.target.closest('[data-close]')) document.getElementById('keys-overlay').classList.remove('open');
+  });
   wireAbout();
   wireNewModal();
   wireHotkeys();

js/core/build-stages.js

@@ -1,62 +0,0 @@
-/*!
- * Tectum
- * Copyright © 2026 Machiel Heinen.
- * Alle rechten voorbehouden. Gebruik uitsluitend met schriftelijke toestemming.
- * Zie LICENTIE.md.
- */
-
-window.BuildStages = (() => {
-  const LIST = [
-    { key: 'regelwerk', label: 'Regelwerk', hint: 'Vloer-, wand- en dakbalken' },
-    { key: 'elektra', label: 'Elektra', hint: 'Installatiebuizen door wanden en plafond, dozen en meterkast' },
-    { key: 'beplating', label: 'Beplating', hint: 'Spaanplaat binnen, OSB vloer, plafond en dakbeschot, cementplaat buiten' },
-    { key: 'doek', label: 'Vochtdoek', hint: 'Vochtdoek op de buitenzijde' },
-    { key: 'latwerk', label: 'Latwerk', hint: 'Kruislat en trasraamplaat' },
-    { key: 'gevel', label: 'Gevel & dak', hint: 'Rabat, steen, kozijnen, dakbedekking, sandwichpanelen' },
-    { key: 'afwerking', label: 'Afgewerkt', hint: 'Dakrand, verlichting, vloerafwerking, verf binnen' }
-  ];
-  const FINAL = LIST.length - 1;
-  const INDEX = Object.fromEntries(LIST.map((s, i) => [s.key, i]));
-
-  const clamp = (stage) => (typeof stage === 'number' && isFinite(stage)) ? Math.max(0, Math.min(FINAL, Math.round(stage))) : FINAL;
-  const shows = (stage, key) => clamp(stage) >= INDEX[key];
-
-  function createBar(pane, stage, onChange) {
-    const el = document.createElement('div');
-    el.className = 'stage-bar';
-    el.innerHTML = `
-      <div class="stage-row">
-        <span class="stage-title"><i class="bi bi-layers"></i>Bouwfase</span>
-        <div class="stage-track">
-          <input type="range" class="stage-range" min="0" max="${FINAL}" step="1" value="${clamp(stage)}" aria-label="Bouwfase">
-          <div class="stage-ticks">${LIST.map((s, i) => `<span data-i="${i}" title="${s.label}: ${s.hint}">${i + 1}</span>`).join('')}</div>
-        </div>
-        <span class="stage-name"></span>
-      </div>
-      <div class="stage-extra"></div>`;
-    pane.appendChild(el);
-    const range = el.querySelector('.stage-range'), name = el.querySelector('.stage-name');
-    const sync = () => {
-      const i = clamp(Number(range.value));
-      name.textContent = LIST[i].label;
-      name.title = LIST[i].hint;
-      el.querySelectorAll('.stage-ticks span').forEach(t => t.classList.toggle('on', Number(t.dataset.i) <= i));
-    };
-    range.addEventListener('input', () => { sync(); onChange(clamp(Number(range.value))); });
-    el.querySelector('.stage-ticks').addEventListener('click', (e) => {
-      const t = e.target.closest('[data-i]');
-      if (!t) return;
-      range.value = t.dataset.i;
-      sync();
-      onChange(clamp(Number(range.value)));
-    });
-    // T, R, ... zijn sneltoetsen van de weergave, niet van de schuif.
-    range.addEventListener('keydown', (e) => { if (!/^Arrow|Home|End/.test(e.key)) range.blur(); });
-    // Na slepen focus loslaten, zodat de pijltoetsen weer naar de weergave (lopen) gaan.
-    el.addEventListener('pointerup', (e) => { if (e.target.matches('input[type=range]')) setTimeout(() => e.target.blur(), 0); });
-    sync();
-    return { el, extra: el.querySelector('.stage-extra'), set: (s) => { range.value = clamp(s); sync(); } };
-  }
-
-  return { LIST, FINAL, INDEX, clamp, shows, createBar };
-})();

js/core/dxf-writer.js

@@ -0,0 +1,284 @@
+/*!
+ * Tectum
+ * Copyright © 2026 Machiel Heinen.
+ * Alle rechten voorbehouden. Gebruik uitsluitend met schriftelijke toestemming.
+ * Zie LICENTIE.md.
+ */
+// DXF R12 (AC1009): het formaat dat elk CAD-pakket opent; DWG maakt het CAD-pakket zelf (Opslaan als).
+// Eenheid mm, tekst in ANSI_1252. Maten zijn echte DIMENSION-entiteiten (met blok), dus aanpasbaar in CAD.
+
+window.DxfWriter = (() => {
+  const CP1252 = { 0x20ac: 0x80, 0x201a: 0x82, 0x0192: 0x83, 0x201e: 0x84, 0x2026: 0x85, 0x2020: 0x86, 0x2021: 0x87, 0x02c6: 0x88, 0x2030: 0x89, 0x0160: 0x8a, 0x2039: 0x8b, 0x0152: 0x8c, 0x017d: 0x8e,
+    0x2018: 0x91, 0x2019: 0x92, 0x201c: 0x93, 0x201d: 0x94, 0x2022: 0x95, 0x2013: 0x96, 0x2014: 0x97, 0x02dc: 0x98, 0x2122: 0x99, 0x0161: 0x9a, 0x203a: 0x9b, 0x0153: 0x9c, 0x017e: 0x9e, 0x0178: 0x9f };
+
+  const LTYPES = {
+    CONTINUOUS: { desc: 'Solid line', dashes: [] },
+    STREEP: { desc: '__ __ __', dashes: [4, -2] },
+    STIP: { desc: '. . . .', dashes: [0.8, -0.8] },
+    STREEPSTIP: { desc: '__ . __ .', dashes: [6, -1.5, 0.5, -1.5] }
+  };
+
+  const num = (v) => {
+    const r = Math.round(v * 1000) / 1000;
+    return Object.is(r, -0) || !isFinite(r) ? '0' : String(r);
+  };
+  const deg = (rad) => ((rad * 180 / Math.PI) % 360 + 360) % 360;
+
+  // Een groepswaarde mag geen regeleinde bevatten.
+  const clean = (s) => String(s == null ? '' : s).replace(/[\r\n]+/g, ' ');
+
+  function create(opts) {
+    const o = opts || {};
+    const scale = o.scale || 50;  // plotschaal: tekst/maatvoering/lijntypes in papier-mm × scale
+    const layers = new Map([['0', { color: 7, ltype: 'CONTINUOUS' }]]);
+    const entities = [];
+    const blocks = [];
+    let dimCount = 0;
+    const ext = { x0: Infinity, y0: Infinity, x1: -Infinity, y1: -Infinity };
+    const grow = (x, y) => {
+      if (x < ext.x0) ext.x0 = x; if (x > ext.x1) ext.x1 = x;
+      if (y < ext.y0) ext.y0 = y; if (y > ext.y1) ext.y1 = y;
+    };
+
+    function layer(name, color, ltype) {
+      if (!layers.has(name)) layers.set(name, { color: color || 7, ltype: LTYPES[ltype] ? ltype : 'CONTINUOUS' });
+      return name;
+    }
+
+    function common(out, lay, eo) {
+      out.push(8, lay || '0');
+      if (eo && eo.ltype && LTYPES[eo.ltype]) out.push(6, eo.ltype);
+      if (eo && eo.color !== undefined && eo.color !== null) out.push(62, eo.color);
+    }
+    function emit(target, type, lay, eo, body) {
+      const out = [0, type];
+      common(out, lay, eo);
+      target.push(out.concat(body));
+    }
+
+    function line(a, b, lay, eo, target) {
+      if (Math.hypot(b.x - a.x, b.y - a.y) < 0.01) return;
+      emit(target || entities, 'LINE', lay, eo, [10, num(a.x), 20, num(a.y), 30, 0, 11, num(b.x), 21, num(b.y), 31, 0]);
+      if (!target) { grow(a.x, a.y); grow(b.x, b.y); }
+    }
+
+    function polyline(pts, closed, lay, eo, target) {
+      const p = pts.filter((q, i) => i === 0 || Math.hypot(q.x - pts[i - 1].x, q.y - pts[i - 1].y) > 0.01);
+      if (closed && p.length > 2 && Math.hypot(p[0].x - p[p.length - 1].x, p[0].y - p[p.length - 1].y) < 0.01) p.pop();
+      if (p.length < 2) return;
+      if (p.length === 2 && !closed) { line(p[0], p[1], lay, eo, target); return; }
+      const t = target || entities;
+      emit(t, 'POLYLINE', lay, eo, [66, 1, 10, 0, 20, 0, 30, 0, 70, closed ? 1 : 0]);
+      p.forEach(q => { emit(t, 'VERTEX', lay, null, [10, num(q.x), 20, num(q.y), 30, 0]); if (!target) grow(q.x, q.y); });
+      emit(t, 'SEQEND', lay, null, []);
+    }
+
+    function circle(c, r, lay, eo, target) {
+      emit(target || entities, 'CIRCLE', lay, eo, [10, num(c.x), 20, num(c.y), 30, 0, 40, num(r)]);
+      if (!target) { grow(c.x - r, c.y - r); grow(c.x + r, c.y + r); }
+    }
+
+    // Hoeken in radialen, tegen de klok in van a0 naar a1.
+    function arc(c, r, a0, a1, lay, eo, target) {
+      emit(target || entities, 'ARC', lay, eo, [10, num(c.x), 20, num(c.y), 30, 0, 40, num(r), 50, num(deg(a0)), 51, num(deg(a1))]);
+      if (!target) { grow(c.x - r, c.y - r); grow(c.x + r, c.y + r); }
+    }
+
+    // h = teksthoogte in model-mm; align: left|center|right; rot in graden.
+    function text(p, h, str, lay, to, target) {
+      const s = clean(str);
+      if (!s) return;
+      const t = to || {};
+      const hj = t.align === 'center' ? 1 : t.align === 'right' ? 2 : 0;
+      const body = [10, num(p.x), 20, num(p.y), 30, 0, 40, num(h), 1, s];
+      if (t.rot) body.push(50, num(t.rot));
+      body.push(7, 'STANDARD');
+      if (hj) body.push(72, hj, 11, num(p.x), 21, num(p.y), 31, 0);
+      emit(target || entities, 'TEXT', lay, t, body);
+      if (!target) { grow(p.x - s.length * h * 0.35, p.y); grow(p.x + s.length * h * 0.35, p.y + h); }
+    }
+
+    // Lineaire maat tussen p1 en p2, maatlijn door 'at' (evenwijdig aan p1-p2 tenzij dir gegeven).
+    const DIM = { txt: 2.5, exo: 1.5, exe: 1.5, tsz: 1.25, gap: 0.8, dle: 1.5 };
+    function dim(p1, p2, at, lay, dopts) {
+      const d = dopts || {};
+      let ux = p2.x - p1.x, uy = p2.y - p1.y;
+      if (d.dir) { ux = d.dir.x; uy = d.dir.y; }
+      const ul = Math.hypot(ux, uy);
+      if (ul < 1e-9) return;
+      ux /= ul; uy /= ul;
+      const nx = -uy, ny = ux;
+      const off = (at.x - p1.x) * nx + (at.y - p1.y) * ny;
+      const s1 = (p1.x - at.x) * ux + (p1.y - at.y) * uy, s2 = (p2.x - at.x) * ux + (p2.y - at.y) * uy;
+      const measured = Math.abs(s2 - s1);
+      if (measured < 1) return;
+      const q1 = { x: at.x + ux * s1, y: at.y + uy * s1 }, q2 = { x: at.x + ux * s2, y: at.y + uy * s2 };
+      const sg = Math.sign(s2 - s1) || 1, k = scale;
+      const name = `*D${++dimCount}`;
+      const be = [];
+      const BB = { color: 0 };
+      // Maatlijn voorbij de streepjes, hulplijnen met afstand tot het object.
+      line({ x: q1.x - ux * sg * DIM.dle * k, y: q1.y - uy * sg * DIM.dle * k }, { x: q2.x + ux * sg * DIM.dle * k, y: q2.y + uy * sg * DIM.dle * k }, '0', BB, be);
+      [[p1, q1], [p2, q2]].forEach(([p, q]) => {
+        const side = Math.sign(off) || 1;
+        const a = { x: p.x + nx * side * DIM.exo * k, y: p.y + ny * side * DIM.exo * k };
+        const b = { x: q.x + nx * side * DIM.exe * k, y: q.y + ny * side * DIM.exe * k };
+        if (Math.abs(off) > DIM.exo * k) line(a, b, '0', BB, be);
+        const t = DIM.tsz * k * Math.SQRT1_2;
+        line({ x: q.x - (ux + nx) * t, y: q.y - (uy + ny) * t }, { x: q.x + (ux + nx) * t, y: q.y + (uy + ny) * t }, '0', BB, be);
+      });
+      let ang = Math.atan2(uy, ux) * 180 / Math.PI;
+      // Tekst leesbaar: van onder of van rechts.
+      let tnx = nx, tny = ny;
+      if (ang > 90.01 || ang <= -89.99) { ang += 180; tnx = -nx; tny = -ny; }
+      ang = (ang + 360) % 360;
+      const mid = { x: (q1.x + q2.x) / 2, y: (q1.y + q2.y) / 2 };
+      const label = d.text !== undefined ? d.text : String(Math.round(measured));
+      const tp = { x: mid.x + tnx * DIM.gap * k, y: mid.y + tny * DIM.gap * k };
+      text(tp, DIM.txt * k, label, '0', { align: 'center', rot: ang, color: 0 }, be);
+      blocks.push({ name, entities: be });
+      const tm = { x: mid.x + tnx * (DIM.gap + DIM.txt / 2) * k, y: mid.y + tny * (DIM.gap + DIM.txt / 2) * k };
+      const body = [2, name, 3, 'TECTUM', 10, num(q2.x), 20, num(q2.y), 30, 0, 11, num(tm.x), 21, num(tm.y), 31, 0, 70, 0];
+      if (d.text !== undefined) body.push(1, clean(d.text));
+      body.push(13, num(p1.x), 23, num(p1.y), 33, 0, 14, num(p2.x), 24, num(p2.y), 34, 0, 50, num(deg(Math.atan2(uy, ux))));
+      emit(entities, 'DIMENSION', lay, null, body);
+      [p1, p2, q1, q2, tm].forEach(p => grow(p.x, p.y));
+    }
+
+    function header() {
+      const has = isFinite(ext.x0);
+      const e = has ? ext : { x0: 0, y0: 0, x1: 10000, y1: 10000 };
+      const v = [
+        ['$ACADVER', 1, 'AC1009'], ['$DWGCODEPAGE', 3, 'ANSI_1252'],
+        ['$INSBASE', 10, 0, 20, 0, 30, 0],
+        ['$EXTMIN', 10, num(e.x0), 20, num(e.y0), 30, 0], ['$EXTMAX', 10, num(e.x1), 20, num(e.y1), 30, 0],
+        ['$LIMMIN', 10, num(e.x0), 20, num(e.y0)], ['$LIMMAX', 10, num(e.x1), 20, num(e.y1)],
+        ['$LTSCALE', 40, scale], ['$TEXTSIZE', 40, 2.5 * scale], ['$TEXTSTYLE', 7, 'STANDARD'], ['$CLAYER', 8, '0'],
+        ['$LUNITS', 70, 2], ['$LUPREC', 70, 0], ['$AUNITS', 70, 0], ['$AUPREC', 70, 0],
+        ['$DIMSTYLE', 2, 'TECTUM'], ['$DIMSCALE', 40, scale], ['$DIMTXT', 40, DIM.txt], ['$DIMTSZ', 40, DIM.tsz], ['$DIMASZ', 40, 2.5],
+        ['$DIMEXO', 40, DIM.exo], ['$DIMEXE', 40, DIM.exe], ['$DIMDLE', 40, DIM.dle], ['$DIMGAP', 40, DIM.gap],
+        ['$DIMTAD', 70, 1], ['$DIMTIH', 70, 0], ['$DIMTOH', 70, 0], ['$DIMZIN', 70, 0]
+      ];
+      const out = [0, 'SECTION', 2, 'HEADER'];
+      v.forEach(([name, ...rest]) => out.push(9, name, ...rest));
+      out.push(0, 'ENDSEC');
+      return out;
+    }
+
+    function table(name, rows) {
+      const out = [0, 'TABLE', 2, name, 70, rows.length];
+      rows.forEach(r => out.push(...r));
+      out.push(0, 'ENDTAB');
+      return out;
+    }
+
+    function tables() {
+      const has = isFinite(ext.x0);
+      const e = has ? ext : { x0: 0, y0: 0, x1: 10000, y1: 10000 };
+      const w = Math.max(1000, e.x1 - e.x0), h = Math.max(1000, e.y1 - e.y0);
+      const vport = [0, 'VPORT', 2, '*ACTIVE', 70, 0, 10, 0, 20, 0, 11, 1, 21, 1,
+        12, num((e.x0 + e.x1) / 2), 22, num((e.y0 + e.y1) / 2), 13, 0, 23, 0, 14, 10, 24, 10, 15, 100, 25, 100,
+        16, 0, 26, 0, 36, 1, 17, 0, 27, 0, 37, 0, 40, num(Math.max(h, w / 1.6) * 1.08), 41, 1.6, 42, 50, 43, 0, 44, 0,
+        50, 0, 51, 0, 71, 0, 72, 100, 73, 1, 74, 3, 75, 0, 76, 0, 77, 0, 78, 0];
+      const ltypes = Object.entries(LTYPES).map(([name, lt]) => {
+        const total = lt.dashes.reduce((a, d) => a + Math.abs(d), 0);
+        const r = [0, 'LTYPE', 2, name, 70, 0, 3, lt.desc, 72, 65, 73, lt.dashes.length, 40, num(total)];
+        lt.dashes.forEach(d => r.push(49, num(d)));
+        return r;
+      });
+      const lay = [...layers.entries()].map(([name, l]) => [0, 'LAYER', 2, name, 70, 0, 62, l.color, 6, l.ltype]);
+      const style = [[0, 'STYLE', 2, 'STANDARD', 70, 0, 40, 0, 41, 1, 50, 0, 71, 0, 42, 2.5 * scale, 3, 'arial.ttf', 4, '']];
+      const dimstyle = [[0, 'DIMSTYLE', 2, 'TECTUM', 70, 0, 3, '', 4, '', 5, '', 6, '', 7, '',
+        40, scale, 41, 2.5, 42, DIM.exo, 43, 7, 44, DIM.exe, 45, 0, 46, DIM.dle, 47, 0, 48, 0,
+        140, DIM.txt, 141, 0, 142, DIM.tsz, 143, 25.4, 144, 1, 145, 0, 146, 1, 147, DIM.gap,
+        71, 0, 72, 0, 73, 0, 74, 0, 75, 0, 76, 0, 77, 1, 78, 0,
+        170, 0, 171, 2, 172, 1, 173, 0, 174, 0, 175, 0, 176, 0, 177, 0, 178, 0]];
+      return [0, 'SECTION', 2, 'TABLES',
+        ...table('VPORT', [vport]), ...table('LTYPE', ltypes), ...table('LAYER', lay), ...table('STYLE', style),
+        ...table('VIEW', []), ...table('UCS', []), ...table('APPID', [[0, 'APPID', 2, 'ACAD', 70, 0]]), ...table('DIMSTYLE', dimstyle),
+        0, 'ENDSEC'];
+    }
+
+    function toString() {
+      const out = [...header(), ...tables(), 0, 'SECTION', 2, 'BLOCKS'];
+      blocks.forEach(b => {
+        out.push(0, 'BLOCK', 8, '0', 2, b.name, 70, 1, 10, 0, 20, 0, 30, 0, 3, b.name);
+        b.entities.forEach(en => out.push(...en));
+        out.push(0, 'ENDBLK', 8, '0');
+      });
+      out.push(0, 'ENDSEC', 0, 'SECTION', 2, 'ENTITIES');
+      entities.forEach(en => out.push(...en));
+      out.push(0, 'ENDSEC', 0, 'EOF');
+      const lines = [];
+      for (let i = 0; i < out.length; i += 2) lines.push(String(out[i]).padStart(3, ' '), String(out[i + 1]));
+      return lines.join('\r\n') + '\r\n';
+    }
+
+    function toBytes() {
+      const s = toString();
+      const bytes = new Uint8Array(s.length);
+      for (let i = 0; i < s.length; i++) {
+        const c = s.charCodeAt(i);
+        bytes[i] = c < 0x80 || (c >= 0xa0 && c <= 0xff) ? c : (CP1252[c] || 0x3f);
+      }
+      return bytes;
+    }
+
+    function save(filename) {
+      const blob = new Blob([toBytes()], { type: 'application/dxf' });
+      const url = URL.createObjectURL(blob);
+      const a = document.createElement('a');
+      a.href = url;
+      a.download = filename;
+      document.body.appendChild(a);
+      a.click();
+      document.body.removeChild(a);
+      URL.revokeObjectURL(url);
+    }
+
+    return { scale, layer, line, polyline, circle, arc, text, dim, toString, toBytes, save, extents: () => Object.assign({}, ext) };
+  }
+
+  // jsPDF-achtige tekenlaag voor bestaande PDF-tekencode (papier-mm, y omlaag) op schaal 1:scale in een laag.
+  // Kleur zwart = BYLAYER, anders de dichtstbijzijnde ACI-kleur; vullingen worden alleen omtrek.
+  const ACI = [[1, 255, 0, 0], [2, 255, 255, 0], [3, 0, 255, 0], [4, 0, 255, 255], [5, 0, 0, 255], [6, 255, 0, 255],
+    [8, 128, 128, 128], [9, 192, 192, 192], [30, 255, 127, 0], [40, 255, 191, 0], [32, 165, 82, 0], [94, 0, 127, 0], [12, 165, 0, 0]];
+  function aciOf(r, g, b) {
+    if (r + g + b < 60) return null;
+    let best = null, bd = Infinity;
+    ACI.forEach(([i, R, G, B]) => { const d = (r - R) ** 2 + (g - G) ** 2 + (b - B) ** 2; if (d < bd) { bd = d; best = i; } });
+    return best;
+  }
+  function pdfAdapter(dxf, lay, map) {
+    const k = dxf.scale;
+    const P = map || ((x, y) => ({ x: x * k, y: -y * k }));
+    let draw = null, txt = null, fontPt = 10, dashed = false;
+    const eo = (c) => ({ color: c, ltype: dashed ? 'STIP' : undefined });
+    const ptToMm = 0.3528 * 0.72;
+    const doc = {
+      setDrawColor(r, g, b) { draw = aciOf(r, g === undefined ? r : g, b === undefined ? r : b); },
+      setTextColor(r, g, b) { txt = aciOf(r, g === undefined ? r : g, b === undefined ? r : b); },
+      setFillColor() {}, setLineWidth() {}, setFont() {},
+      setFontSize(pt) { fontPt = pt; },
+      setLineDashPattern(p) { dashed = !!(p && p.length); },
+      getTextWidth(s) { return String(s).length * fontPt * 0.3528 * 0.5; },
+      line(x1, y1, x2, y2) { dxf.line(P(x1, y1), P(x2, y2), lay, eo(draw)); },
+      rect(x, y, w, h) { dxf.polyline([P(x, y), P(x + w, y), P(x + w, y + h), P(x, y + h)], true, lay, eo(draw)); },
+      circle(x, y, r) { const c = P(x, y); dxf.circle(c, r * k, lay, eo(draw)); },
+      triangle(x1, y1, x2, y2, x3, y3) { dxf.polyline([P(x1, y1), P(x2, y2), P(x3, y3)], true, lay, eo(draw)); },
+      lines(segs, x, y, sc, style, closed) {
+        const pts = [P(x, y)];
+        let cx = x, cy = y;
+        segs.forEach(([dx, dy]) => { cx += dx; cy += dy; pts.push(P(cx, cy)); });
+        dxf.polyline(pts, !!closed, lay, eo(draw));
+      },
+      text(str, x, y, to) {
+        const t = to || {};
+        dxf.text(P(x, y), fontPt * ptToMm * k, Array.isArray(str) ? str.join(' ') : str, lay, { align: t.align, rot: t.angle || 0, color: txt });
+      }
+    };
+    return doc;
+  }
+
+  return { create, pdfAdapter, LTYPES };
+})();

js/core/ifc-writer.js

@@ -0,0 +1,187 @@
+/*!
+ * Tectum
+ * Copyright © 2026 Machiel Heinen.
+ * Alle rechten voorbehouden. Gebruik uitsluitend met schriftelijke toestemming.
+ * Zie LICENTIE.md.
+ */
+// IFC4 (STEP, ISO 10303-21) met driehoeksnetten (IfcTriangulatedFaceSet), eenheid mm, Z omhoog.
+// Ruimtelijke opbouw: project > terrein > gebouw > bouwlaag; elementen eronder of in een samenstelling.
+
+window.IfcWriter = (() => {
+  const B64 = '0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz_$';
+  function guid() {
+    const b = new Uint8Array(16);
+    if (typeof crypto !== 'undefined' && crypto.getRandomValues) crypto.getRandomValues(b);
+    else for (let i = 0; i < 16; i++) b[i] = Math.floor(Math.random() * 256);
+    b[6] = (b[6] & 0x0f) | 0x40; b[8] = (b[8] & 0x3f) | 0x80;
+    let out = B64[b[0] >> 6] + B64[b[0] & 63];
+    for (let i = 1; i < 16; i += 3) {
+      const n = (b[i] << 16) | (b[i + 1] << 8) | b[i + 2];
+      out += B64[(n >> 18) & 63] + B64[(n >> 12) & 63] + B64[(n >> 6) & 63] + B64[n & 63];
+    }
+    return out;
+  }
+
+  // Tekst: ' verdubbelen, \ escapen, alles buiten ASCII als \X2\hhhh\X0\.
+  function str(s) {
+    if (s === null || s === undefined) return '$';
+    let out = '', ext = '';
+    const flush = () => { if (ext) { out += '\\X2\\' + ext + '\\X0\\'; ext = ''; } };
+    for (const ch of String(s)) {
+      const c = ch.codePointAt(0);
+      if (c >= 32 && c < 127) {
+        flush();
+        out += ch === "'" ? "''" : ch === '\\' ? '\\\\' : ch;
+      } else if (c >= 127 && c <= 0xffff) ext += c.toString(16).toUpperCase().padStart(4, '0');
+      else if (c > 0xffff) ext += '003F';
+    }
+    flush();
+    return `'${out}'`;
+  }
+  function real(v) {
+    const r = Math.round(v * 100) / 100;
+    const s = Object.is(r, -0) || !isFinite(r) ? '0' : String(r);
+    return /[.eE]/.test(s) ? s : s + '.';
+  }
+  const list = (a) => `(${a.join(',')})`;
+  const ref = (n) => `#${n}`;
+
+  function create(opts) {
+    const o = opts || {};
+    const lines = [];
+    let next = 1;
+    const add = (type, args) => { const id = next++; lines.push(`#${id}=${type}(${args.join(',')});`); return id; };
+
+    const mm = add('IFCSIUNIT', ['*', '.LENGTHUNIT.', '.MILLI.', '.METRE.']);
+    const m2 = add('IFCSIUNIT', ['*', '.AREAUNIT.', '$', '.SQUARE_METRE.']);
+    const m3 = add('IFCSIUNIT', ['*', '.VOLUMEUNIT.', '$', '.CUBIC_METRE.']);
+    const rad = add('IFCSIUNIT', ['*', '.PLANEANGLEUNIT.', '$', '.RADIAN.']);
+    const units = add('IFCUNITASSIGNMENT', [list([mm, m2, m3, rad].map(ref))]);
+    const origin = add('IFCCARTESIANPOINT', [list(['0.', '0.', '0.'])]);
+    const axis = add('IFCAXIS2PLACEMENT3D', [ref(origin), '$', '$']);
+    const ctx = add('IFCGEOMETRICREPRESENTATIONCONTEXT', ['$', str('Model'), '3', '1.E-05', ref(axis), '$']);
+    const body = add('IFCGEOMETRICREPRESENTATIONSUBCONTEXT', [str('Body'), str('Model'), '*', '*', '*', '*', ref(ctx), '$', '.MODEL_VIEW.', '$']);
+    const project = add('IFCPROJECT', [str(guid()), '$', str(o.project || 'Woning'), str(o.description || null), '$', '$', '$', list([ref(ctx)]), ref(units)]);
+    const sitePl = add('IFCLOCALPLACEMENT', ['$', ref(axis)]);
+    const site = add('IFCSITE', [str(guid()), '$', str('Terrein'), '$', '$', ref(sitePl), '$', '$', '.ELEMENT.', '$', '$', '$', '$', '$']);
+    const bldPl = add('IFCLOCALPLACEMENT', [ref(sitePl), ref(axis)]);
+    const a = o.address || {};
+    const addr = a.lines || a.town ? add('IFCPOSTALADDRESS', ['$', '$', '$', '$', a.lines ? list([str(a.lines)]) : '$', '$', str(a.town || null), '$', '$', str('Nederland')]) : null;
+    const building = add('IFCBUILDING', [str(guid()), '$', str(o.building || 'Woning'), '$', '$', ref(bldPl), '$', '$', '.ELEMENT.', '$', '$', addr ? ref(addr) : '$']);
+    const stPl = add('IFCLOCALPLACEMENT', [ref(bldPl), ref(axis)]);
+    const storey = add('IFCBUILDINGSTOREY', [str(guid()), '$', str(o.storey || 'Begane grond'), '$', '$', ref(stPl), '$', '$', '.ELEMENT.', '0.']);
+    add('IFCRELAGGREGATES', [str(guid()), '$', '$', '$', ref(project), list([ref(site)])]);
+    add('IFCRELAGGREGATES', [str(guid()), '$', '$', '$', ref(site), list([ref(building)])]);
+    add('IFCRELAGGREGATES', [str(guid()), '$', '$', '$', ref(building), list([ref(storey)])]);
+
+    // Kleur [r, g, b] (0..1) als oppervlaktestijl, één per kleur.
+    const styles = new Map();
+    function style(rgb) {
+      const k = rgb.map(c => Math.round(c * 1000)).join(',');
+      if (!styles.has(k)) {
+        const col = add('IFCCOLOURRGB', ['$', ...rgb.map(real)]);
+        const shading = add('IFCSURFACESTYLESHADING', [ref(col), '0.']);
+        styles.set(k, add('IFCSURFACESTYLE', ['$', '.BOTH.', list([ref(shading)])]));
+      }
+      return styles.get(k);
+    }
+
+    const contained = [];
+    const materials = new Map();   // naam -> { id, els: [] }
+    const psets = new Map();       // sleutel -> { props, els: [] }
+
+    // Driehoeken als vlakke lijst [x,y,z, x,y,z, x,y,z, ...] in mm; punten worden samengevoegd.
+    function shape(tri, rgb) {
+      const idx = new Map(), pts = [], faces = [];
+      const key = (i) => `${Math.round(tri[i] * 10)},${Math.round(tri[i + 1] * 10)},${Math.round(tri[i + 2] * 10)}`;
+      const vid = (i) => {
+        const k = key(i);
+        if (!idx.has(k)) { idx.set(k, pts.length + 1); pts.push(`(${real(tri[i])},${real(tri[i + 1])},${real(tri[i + 2])})`); }
+        return idx.get(k);
+      };
+      for (let i = 0; i + 8 < tri.length; i += 9) {
+        const f = [vid(i), vid(i + 3), vid(i + 6)];
+        if (f[0] !== f[1] && f[1] !== f[2] && f[0] !== f[2]) faces.push(`(${f.join(',')})`);
+      }
+      if (!faces.length) return null;
+      const pl = add('IFCCARTESIANPOINTLIST3D', [`(${pts.join(',')})`]);
+      const fs = add('IFCTRIANGULATEDFACESET', [ref(pl), '$', '$', `(${faces.join(',')})`, '$']);
+      if (rgb) add('IFCSTYLEDITEM', [ref(fs), list([ref(style(rgb))]), '$']);
+      const rep = add('IFCSHAPEREPRESENTATION', [ref(body), str('Body'), str('Tessellation'), list([ref(fs)])]);
+      return add('IFCPRODUCTDEFINITIONSHAPE', ['$', '$', list([ref(rep)])]);
+    }
+
+    // el: { type: 'IFCMEMBER', predefined: 'STUD', name, tag, tri, color: [r, g, b], material, props: {naam: waarde}, objectType }
+    function element(el) {
+      const rep = el.tri ? shape(el.tri, el.color) : null;
+      if (el.tri && !rep) return null;
+      const pl = add('IFCLOCALPLACEMENT', [ref(stPl), ref(axis)]);
+      const args = [str(guid()), '$', str(el.name), str(el.description || null), str(el.objectType || null), ref(pl), rep ? ref(rep) : '$', str(el.tag || null)];
+      if (el.type === 'IFCELEMENTASSEMBLY') args.push('.FACTORY.', `.${el.predefined || 'NOTDEFINED'}.`);
+      else args.push(`.${el.predefined || 'NOTDEFINED'}.`);
+      const id = add(el.type, args);
+      if (el.material) {
+        if (!materials.has(el.material)) {
+          const id = add('IFCMATERIAL', [str(el.material), '$', '$']);
+          // Ook aan het materiaal, voor viewers die op materiaal kleuren.
+          if (el.color) {
+            const si = add('IFCSTYLEDITEM', ['$', list([ref(style(el.color))]), '$']);
+            const sr = add('IFCSTYLEDREPRESENTATION', [ref(ctx), str('Style'), str('Material'), list([ref(si)])]);
+            add('IFCMATERIALDEFINITIONREPRESENTATION', ['$', '$', list([ref(sr)]), ref(id)]);
+          }
+          materials.set(el.material, { id, els: [] });
+        }
+        materials.get(el.material).els.push(id);
+      }
+      if (el.props) {
+        const k = JSON.stringify(el.props);
+        if (!psets.has(k)) psets.set(k, { props: el.props, els: [] });
+        psets.get(k).els.push(id);
+      }
+      return id;
+    }
+
+    function contain(id) { if (id) contained.push(id); }
+    function aggregate(parent, children) {
+      const c = children.filter(Boolean);
+      if (parent && c.length) add('IFCRELAGGREGATES', [str(guid()), '$', '$', '$', ref(parent), list(c.map(ref))]);
+    }
+
+    const value = (v) => typeof v === 'number' ? `IFCLENGTHMEASURE(${real(v)})` : `IFCLABEL(${str(v)})`;
+    function toString(filename) {
+      if (contained.length) add('IFCRELCONTAINEDINSPATIALSTRUCTURE', [str(guid()), '$', '$', '$', list(contained.map(ref)), ref(storey)]);
+      materials.forEach(m => add('IFCRELASSOCIATESMATERIAL', [str(guid()), '$', '$', '$', list(m.els.map(ref)), ref(m.id)]));
+      psets.forEach(p => {
+        const props = Object.entries(p.props).filter(([, v]) => v !== null && v !== undefined && v !== '')
+          .map(([n, v]) => add('IFCPROPERTYSINGLEVALUE', [str(n), '$', value(v), '$']));
+        if (!props.length) return;
+        const ps = add('IFCPROPERTYSET', [str(guid()), '$', str(o.psetName || 'Pset_Tectum'), '$', list(props.map(ref))]);
+        add('IFCRELDEFINESBYPROPERTIES', [str(guid()), '$', '$', '$', list(p.els.map(ref)), ref(ps)]);
+      });
+      contained.length = 0; materials.clear(); psets.clear();
+      const now = new Date().toISOString().slice(0, 19);
+      return [
+        'ISO-10303-21;', 'HEADER;',
+        "FILE_DESCRIPTION(('ViewDefinition [ReferenceView_V1.2]'),'2;1');",
+        `FILE_NAME(${str(filename || 'woning.ifc')},${str(now)},(${str(o.author || '')}),(${str(o.organization || '')}),${str(o.app || 'Tectum')},${str(o.app || 'Tectum')},'');`,
+        "FILE_SCHEMA(('IFC4'));", 'ENDSEC;', 'DATA;', ...lines, 'ENDSEC;', 'END-ISO-10303-21;', ''
+      ].join('\n');
+    }
+
+    function save(filename) {
+      const blob = new Blob([toString(filename)], { type: 'application/x-step' });
+      const url = URL.createObjectURL(blob);
+      const el = document.createElement('a');
+      el.href = url;
+      el.download = filename;
+      document.body.appendChild(el);
+      el.click();
+      document.body.removeChild(el);
+      URL.revokeObjectURL(url);
+    }
+
+    return { element, contain, aggregate, toString, save, count: () => next - 1 };
+  }
+
+  return { create, guid };
+})();

js/core/inspector.js

@@ -0,0 +1,70 @@
+/*!
+ * Tectum
+ * Copyright © 2026 Machiel Heinen.
+ * Alle rechten voorbehouden. Gebruik uitsluitend met schriftelijke toestemming.
+ * Zie LICENTIE.md.
+ */
+// Eigenschappenpaneel rechts: eigenschappen van de selectie, of van de woning als er niets geselecteerd is.
+// Een sectie = { key, label, icon, groups() → [{ label, html }], wire(el) }; elke sectie krijgt een eigen element,
+// zodat wire() alleen de eigen knoppen koppelt.
+
+window.Inspector = (() => {
+  const { icon, esc } = UI;
+  const big = UI.btnOf('ins-btn ins-big');
+  const small = UI.btnOf('ins-btn');
+  const kv = (label, value, unit) =>
+    `<div class="ins-kv"><span>${label}</span><b>${value}${unit ? `<small>${unit}</small>` : ''}</b></div>`;
+
+  const PREF_KEY = 'tectum.inspector.open';
+  let open;
+  try { open = new Set(JSON.parse(localStorage.getItem(PREF_KEY) || 'null') || ['gevel']); } catch (e) { open = new Set(['gevel']); }
+  const saveOpen = () => { try { localStorage.setItem(PREF_KEY, JSON.stringify([...open])); } catch (e) { } };
+
+  // Een groepskop gelijk aan de sectienaam (bijv. Elektra › Elektra) vervalt.
+  const groupsHtml = (groups, secLabel) => groups.filter(Boolean).map(g =>
+    `<div class="ins-group${g.cls ? ' ' + g.cls : ''}">${g.label && g.label.toLowerCase() !== String(secLabel || '').toLowerCase() ? `<h3>${g.label}</h3>` : ''}<div class="ins-group-body">${g.html}</div></div>`).join('');
+
+  // view = { crumbs: [{ label, attrs }], title, icon, sub, top: html, sections: [...], collapsible, onBack }
+  function render(el, view) {
+    const scrollKey = view.title + '|' + (view.sub || '');
+    const keepScroll = el._insKey === scrollKey ? el.scrollTop : 0;
+    el._insKey = scrollKey;
+    el.innerHTML = `<div class="ins-head">
+        ${view.crumbs && view.crumbs.length ? `<div class="ins-crumbs">${view.crumbs.map(c => `<button type="button" class="ins-crumb" ${c.attrs || ''}>${esc(c.label)}</button>`).join(icon('chevron-right'))}${icon('chevron-right')}</div>` : ''}
+        <h2>${view.icon ? icon(view.icon) : ''}<span>${esc(view.title)}</span></h2>
+        ${view.sub ? `<div class="ins-sub">${esc(view.sub)}</div>` : ''}
+      </div>
+      ${view.top ? `<div class="ins-top">${view.top}</div>` : ''}
+      <div class="ins-sections"></div>`;
+    const host = el.querySelector('.ins-sections');
+    view.sections.filter(Boolean).forEach(sec => {
+      const node = document.createElement('section');
+      const collapsible = view.collapsible;
+      const isOpen = !collapsible || open.has(sec.key);
+      node.className = 'ins-section' + (collapsible ? ' ins-collapsible' : '') + (isOpen ? ' open' : '');
+      node.innerHTML = (collapsible ? `<button type="button" class="ins-section-head" aria-expanded="${isOpen}">${sec.icon ? icon(sec.icon) : ''}<span>${sec.label}</span>${icon('chevron-down')}</button>` : '') +
+        '<div class="ins-section-body"></div>';
+      host.appendChild(node);
+      // Een dichte sectie wordt pas opgebouwd (en gekoppeld) als hij opengaat.
+      let built = false;
+      const build = () => {
+        if (built) return;
+        built = true;
+        node.querySelector('.ins-section-body').innerHTML = groupsHtml(sec.groups ? sec.groups() : [], sec.label);
+        if (sec.wire) sec.wire(node);
+      };
+      if (isOpen) build();
+      if (collapsible) node.querySelector('.ins-section-head').addEventListener('click', () => {
+        const now = !node.classList.contains('open');
+        if (now) build();
+        node.classList.toggle('open', now);
+        node.querySelector('.ins-section-head').setAttribute('aria-expanded', now);
+        if (now) open.add(sec.key); else open.delete(sec.key);
+        saveOpen();
+      });
+    });
+    el.scrollTop = keepScroll;
+  }
+
+  return { big, small, kv, render };
+})();

js/core/menubar.js

@@ -0,0 +1,62 @@
+/*!
+ * Tectum
+ * Copyright © 2026 Machiel Heinen.
+ * Alle rechten voorbehouden. Gebruik uitsluitend met schriftelijke toestemming.
+ * Zie LICENTIE.md.
+ */
+// Menubalk: menu = { label, items: [{ label, icon, keys, run, enabled(), checked() } | { sep: true } | { head }] }.
+// Beschikbaarheid wordt bij het openen bepaald; is een menu open, dan opent hover het buurmenu.
+
+window.Menubar = (() => {
+  let root = null, menus = [], openIdx = -1;
+
+  function itemHtml(it, mi, ii) {
+    if (it.sep) return '<div class="mb-sep"></div>';
+    if (it.head) return `<div class="mb-head">${it.head}</div>`;
+    const off = it.enabled && !it.enabled();
+    const on = it.checked && it.checked();
+    return `<button type="button" class="mb-item${on ? ' checked' : ''}" data-mi="${mi}" data-ii="${ii}"${off ? ' disabled' : ''}>
+      <span class="mb-ico">${on ? '<i class="bi bi-check2"></i>' : it.icon ? `<i class="bi bi-${it.icon}"></i>` : ''}</span>
+      <span class="mb-label">${it.label}</span><span class="mb-keys">${it.keys || ''}</span></button>`;
+  }
+
+  function close() {
+    if (openIdx < 0) return false;
+    openIdx = -1;
+    UI.release(close);
+    root.querySelectorAll('.mb-menu').forEach(m => m.classList.remove('open'));
+    root.querySelectorAll('.mb-drop').forEach(d => { d.innerHTML = ''; });
+    return true;
+  }
+
+  function openMenu(i) {
+    if (openIdx < 0) UI.claim(close);
+    else { root.querySelectorAll('.mb-menu').forEach(m => m.classList.remove('open')); root.querySelectorAll('.mb-drop').forEach(d => { d.innerHTML = ''; }); }
+    openIdx = i;
+    const wrap = root.querySelectorAll('.mb-menu')[i];
+    wrap.classList.add('open');
+    wrap.querySelector('.mb-drop').innerHTML = menus[i].items.map((it, ii) => itemHtml(it, i, ii)).join('');
+  }
+
+  function init(el, list) {
+    root = el;
+    menus = list;
+    el.innerHTML = menus.map((m, i) => `<div class="mb-menu"><button type="button" class="mb-top" data-menu="${i}">${m.label}</button><div class="mb-drop" role="menu"></div></div>`).join('');
+    el.addEventListener('click', (e) => {
+      e.stopPropagation();
+      const top = e.target.closest('[data-menu]');
+      if (top) { const i = Number(top.dataset.menu); if (openIdx === i) close(); else openMenu(i); return; }
+      const item = e.target.closest('.mb-item');
+      if (!item || item.disabled) return;
+      const it = menus[Number(item.dataset.mi)].items[Number(item.dataset.ii)];
+      close();
+      it.run();
+    });
+    el.addEventListener('mouseover', (e) => {
+      const top = e.target.closest('[data-menu]');
+      if (top && openIdx >= 0 && Number(top.dataset.menu) !== openIdx) openMenu(Number(top.dataset.menu));
+    });
+  }
+
+  return { init, close };
+})();

js/core/obj-writer.js

@@ -0,0 +1,198 @@
+/*!
+ * Tectum
+ * Copyright © 2026 Machiel Heinen.
+ * Alle rechten voorbehouden. Gebruik uitsluitend met schriftelijke toestemming.
+ * Zie LICENTIE.md.
+ */
+// Wavefront OBJ + MTL + texturen (PNG) uit three.js-objecten, in meters, Y omhoog (Blender: standaard import).
+// Texturen: herhaling/verschuiving (texture.matrix) zit in de UV's, de MTL verwijst naar textures/*.png.
+// PBR via de MTL-uitbreiding (Pr ruwheid, Pm metaal, d doorzichtigheid, Ke gloed), die Blender inleest.
+
+window.ObjWriter = (() => {
+  const f4 = (v) => { const r = Math.round(v * 10000) / 10000; return Object.is(r, -0) ? '0' : String(r); };
+  const f3 = (v) => { const r = Math.round(v * 1000) / 1000; return Object.is(r, -0) ? '0' : String(r); };
+  const safe = (s) => String(s || '').replace(/[^A-Za-z0-9_-]+/g, '_').slice(0, 40);
+
+  function pngBytes(image) {
+    try {
+      const w = image.naturalWidth || image.videoWidth || image.width, h = image.naturalHeight || image.videoHeight || image.height;
+      if (!w || !h) return null;
+      const c = document.createElement('canvas');
+      c.width = w; c.height = h;
+      c.getContext('2d').drawImage(image, 0, 0);
+      const bin = atob(c.toDataURL('image/png').split(',')[1]);
+      const out = new Uint8Array(bin.length);
+      for (let i = 0; i < bin.length; i++) out[i] = bin.charCodeAt(i);
+      return out;
+    } catch (e) { return null; }
+  }
+
+  // objects: three.js-objecten (zichtbaar deel); origin: verschuiving in meters; name: basisnaam van de bestanden.
+  function build(objects, opts) {
+    const o = opts || {};
+    const name = o.name || 'woning', origin = o.origin || { x: 0, y: 0, z: 0 };
+    const enc = new TextEncoder();
+    const obj = [`# Tectum${o.app ? ' ' + o.app : ''}\n# meters, Y omhoog\nmtllib ${name}.mtl\n`], chunks = [];
+    const mats = new Map(), textures = new Map(), files = [];
+    let vBase = 1, tBase = 1, nBase = 1, meshNr = 0, triCount = 0;
+    const flush = () => { if (obj.length > 2000) { chunks.push(enc.encode(obj.join(''))); obj.length = 0; } };
+
+    function textureFile(tex) {
+      if (!tex || !tex.image) return null;
+      const key = tex.image;
+      if (!textures.has(key)) {
+        const bytes = pngBytes(tex.image);
+        const file = bytes ? `textures/tex_${textures.size + 1}.png` : null;
+        if (bytes) files.push({ name: file, data: bytes });
+        textures.set(key, file);
+      }
+      return textures.get(key);
+    }
+    function matName(m) {
+      if (!mats.has(m)) mats.set(m, { name: `m${mats.size + 1}_${safe(m.name || m.type)}`, mat: m, map: textureFile(m.map) });
+      return mats.get(m);
+    }
+
+    const v = new THREE.Vector3(), nm = new THREE.Matrix3(), uv = new THREE.Vector2();
+    // Eerst de hele boom bijwerken: een mesh alleen gebruikt de (verouderde) matrix van zijn groep.
+    const visit = (root) => root && (root.updateMatrixWorld(true), root.traverseVisible(mesh => {
+      if (!mesh.isMesh || !mesh.geometry || !mesh.geometry.attributes.position) return;
+      const g = mesh.geometry, pos = g.attributes.position, nrm = g.attributes.normal, uvA = g.attributes.uv, idx = g.index;
+      nm.getNormalMatrix(mesh.matrixWorld);
+      const flip = mesh.matrixWorld.determinant() < 0;
+      const list = Array.isArray(mesh.material) ? mesh.material : [mesh.material];
+      const groups = g.groups && g.groups.length ? g.groups : [{ start: 0, count: idx ? idx.count : pos.count, materialIndex: 0 }];
+      const out = [`o ${safe(mesh.parent && mesh.parent.name) || 'deel'}_${++meshNr}\n`];
+      for (let i = 0; i < pos.count; i++) {
+        v.fromBufferAttribute(pos, i).applyMatrix4(mesh.matrixWorld);
+        out.push(`v ${f4(v.x - origin.x)} ${f4(v.y - origin.y)} ${f4(v.z - origin.z)}\n`);
+      }
+      if (nrm) for (let i = 0; i < nrm.count; i++) {
+        v.fromBufferAttribute(nrm, i).applyMatrix3(nm).normalize();
+        out.push(`vn ${f3(v.x)} ${f3(v.y)} ${f3(v.z)}\n`);
+      }
+      let tCount = 0;
+      groups.forEach(gr => {
+        const m = list[gr.materialIndex] || list[0];
+        if (!m || m.visible === false) return;
+        const mi = matName(m);
+        out.push(`usemtl ${mi.name}\n`);
+        const map = mi.map && m.map ? m.map : null;
+        if (map) map.updateMatrix();
+        const end = Math.min(gr.start + gr.count, idx ? idx.count : pos.count);
+        for (let k = gr.start; k + 2 < end; k += 3) {
+          let c = [0, 1, 2].map(j => idx ? idx.getX(k + j) : k + j);
+          if (flip) c = [c[0], c[2], c[1]];
+          const corner = c.map(ci => {
+            let s = `${vBase + ci}`;
+            if (uvA && map) {
+              uv.fromBufferAttribute(uvA, ci).applyMatrix3(map.matrix);
+              out.push(`vt ${f4(uv.x)} ${f4(uv.y)}\n`);
+              s += `/${tBase + tCount++}`;
+            } else if (nrm) s += '/';
+            if (nrm) s += `/${nBase + ci}`;
+            return s;
+          });
+          out.push(`f ${corner.join(' ')}\n`);
+          triCount++;
+        }
+      });
+      vBase += pos.count; tBase += tCount; if (nrm) nBase += nrm.count;
+      obj.push(out.join(''));
+      flush();
+    }));
+    objects.forEach(visit);
+    chunks.push(enc.encode(obj.join('')));
+
+    // De app toont kleurwaarden zoals ze zijn (geen kleurbeheer); Blender rekent lineair: sRGB -> lineair.
+    const lin = (x) => x <= 0.04045 ? x / 12.92 : Math.pow((x + 0.055) / 1.055, 2.4);
+    const col = (c) => c ? `${f3(lin(c.r))} ${f3(lin(c.g))} ${f3(lin(c.b))}` : '0.6 0.6 0.6';
+    const mtl = [`# Tectum materialen\n`];
+    mats.forEach(({ name: n, mat: m, map }) => {
+      mtl.push(`\nnewmtl ${n}\n`);
+      mtl.push(`Kd ${col(m.color)}\n`);
+      mtl.push('Ks 0.5 0.5 0.5\n');
+      if (m.emissive && (m.emissive.r || m.emissive.g || m.emissive.b)) {
+        const k = m.emissiveIntensity !== undefined ? m.emissiveIntensity : 1;
+        mtl.push(`Ke ${f3(lin(m.emissive.r) * k)} ${f3(lin(m.emissive.g) * k)} ${f3(lin(m.emissive.b) * k)}\n`);
+      }
+      if (m.roughness !== undefined) mtl.push(`Pr ${f3(m.roughness)}\n`);
+      if (m.metalness !== undefined) mtl.push(`Pm ${f3(m.metalness)}\n`);
+      const d = m.transparent ? (m.opacity !== undefined ? m.opacity : 1) : 1;
+      mtl.push(`d ${f3(d)}\nillum 2\n`);
+      if (map) mtl.push(`map_Kd ${map}\n`);
+    });
+
+    return {
+      files: [{ name: `${name}.obj`, data: chunks }, { name: `${name}.mtl`, data: enc.encode(mtl.join('')) }].concat(files),
+      stats: { meshes: meshNr, triangles: triCount, materials: mats.size, textures: files.length }
+    };
+  }
+
+  // OBJ kent geen lampen: een Blender-script dat de OBJ importeert (als die er nog niet is) en de lampen als echte
+  // spotlights plaatst. sources: LightingModel.lightSources (m, Y omhoog); Blender is Z omhoog: (x, -z, y).
+  const BLENDER_WATT = { wandlamp: 10, dakrandspot: 8, binnenspot: 15 };
+  function blenderLights(sources, opts) {
+    const o = opts || {}, origin = o.origin || { x: 0, y: 0, z: 0 }, name = o.name || 'woning';
+    const c = new THREE.Color(o.color !== undefined ? o.color : 0xffd9a0);
+    const lin = (x) => x <= 0.04045 ? x / 12.92 : Math.pow((x + 0.055) / 1.055, 2.4);
+    const t = (v) => `(${v.map(f4).join(', ')})`;
+    const rows = sources.map(s => `    (${JSON.stringify(s.kind)}, ${t([s.x - origin.x, -(s.z - origin.z), s.y - origin.y])}, ${t([s.dir.x, -s.dir.z, s.dir.y])}, ` +
+      `${f3(Math.min(Math.PI, s.angle * 2))}, ${f3(s.penumbra)}, ${BLENDER_WATT[s.kind] || 10}),\n`).join('');
+    return `# Tectum${o.app ? ' ' + o.app : ''}: lampen voor ${name}.obj
+# Blender: Scripting > Open > dit bestand > Run Script. Importeert ${name}.obj uit dezelfde map
+# (IMPORTEER = False als je de OBJ al zelf hebt geïmporteerd) en zet elke lamp als spotlight in de
+# collectie "Tectum lampen"; opnieuw uitvoeren vervangt de lampen.
+# HELDERHEID schaalt alle lampen; vermogens in watt per soort staan in de lijst (soort, plek, richting,
+# kegel, zachte rand, watt).
+import bpy, os
+from mathutils import Vector
+
+IMPORTEER = True
+HELDERHEID = 1.0
+KLEUR = (${f3(lin(c.r))}, ${f3(lin(c.g))}, ${f3(lin(c.b))})
+OBJ = "${name}.obj"
+LAMPEN = [
+${rows}]
+
+def map_van_script():
+    for area in bpy.context.screen.areas if bpy.context.screen else []:
+        if area.type == 'TEXT_EDITOR' and area.spaces.active.text and area.spaces.active.text.filepath:
+            return os.path.dirname(bpy.path.abspath(area.spaces.active.text.filepath))
+    return os.path.dirname(bpy.data.filepath) if bpy.data.filepath else ""
+
+pad = os.path.join(map_van_script(), OBJ)
+if IMPORTEER and not any(ob.get("tectum") == OBJ for ob in bpy.data.objects):
+    if not os.path.exists(pad):
+        raise Exception(f"{OBJ} niet gevonden naast dit script; zet IMPORTEER = False na een eigen import")
+    if hasattr(bpy.ops.wm, "obj_import"):
+        bpy.ops.wm.obj_import(filepath=pad)
+    else:
+        bpy.ops.import_scene.obj(filepath=pad)
+    for ob in bpy.context.selected_objects:
+        ob["tectum"] = OBJ
+
+oud = bpy.data.collections.get("Tectum lampen")
+if oud:
+    for ob in list(oud.objects):
+        bpy.data.objects.remove(ob, do_unlink=True)
+    bpy.data.collections.remove(oud)
+col = bpy.data.collections.new("Tectum lampen")
+bpy.context.scene.collection.children.link(col)
+for i, (soort, plek, richting, kegel, rand, watt) in enumerate(LAMPEN):
+    licht = bpy.data.lights.new(f"{soort}_{i + 1}", 'SPOT')
+    licht.energy = watt * HELDERHEID
+    licht.color = KLEUR
+    licht.spot_size = kegel
+    licht.spot_blend = rand
+    licht.shadow_soft_size = 0.03
+    ob = bpy.data.objects.new(licht.name, licht)
+    ob.location = plek
+    ob.rotation_euler = Vector(richting).to_track_quat('-Z', 'Y').to_euler()
+    col.objects.link(ob)
+print(f"Tectum: {len(LAMPEN)} lampen geplaatst")
+`;
+  }
+
+  return { build, blenderLights };
+})();

js/core/ribbon.js

@@ -1,116 +0,0 @@
-/*!
- * Tectum
- * Copyright © 2026 Machiel Heinen.
- * Alle rechten voorbehouden. Gebruik uitsluitend met schriftelijke toestemming.
- * Zie LICENTIE.md.
- */
-
-window.Ribbon = (() => {
-  const sources = {};
-  const SOURCE_ORDER = ['app', 'editor'];
-  let root = null, tabsEl = null, bodyEl = null;
-  let activeKey = null, lastPlainKey = null;
-  let auto = true;
-  let collapsed = false, notified = null;
-  const listeners = [];
-  const PREF_KEY = 'tectum.ribbon.collapsed';
-
-  const icon = (n) => `<i class="bi bi-${n}" aria-hidden="true"></i>`;
-  const big = (label, iconName, attrs, cls) =>
-    `<button type="button" class="rb-btn rb-big${cls ? ' ' + cls : ''}" ${attrs || ''}>${icon(iconName)}<span>${label}</span></button>`;
-  const small = (label, iconName, attrs, cls) =>
-    `<button type="button" class="rb-btn rb-small${cls ? ' ' + cls : ''}" ${attrs || ''}>${icon(iconName)}<span>${label}</span></button>`;
-  const kv = (label, value, unit) =>
-    `<div class="rb-kv"><span>${label}</span><b>${value}${unit ? `<small>${unit}</small>` : ''}</b></div>`;
-
-  function allTabs() {
-    const byKey = new Map();
-    SOURCE_ORDER.concat(Object.keys(sources).filter(n => !SOURCE_ORDER.includes(n))).forEach(name => {
-      (sources[name] || []).forEach(t => {
-        if (!byKey.has(t.key)) byKey.set(t.key, { key: t.key, label: t.label, order: t.order || 0, contextual: !!t.contextual, icon: t.icon, parts: [] });
-        const m = byKey.get(t.key);
-        if (t.order !== undefined && name !== 'app') m.order = t.order;
-        if (t.label && name !== 'app') m.label = t.label;
-        if (t.contextual) m.contextual = true;
-        m.parts.push(t);
-      });
-    });
-    return Array.from(byKey.values()).sort((a, b) => (a.contextual - b.contextual) || (a.order - b.order));
-  }
-
-  function renderTabs(list) {
-    tabsEl.innerHTML = list.map(t =>
-      `<button type="button" class="rb-tab${t.key === activeKey ? ' active' : ''}${t.contextual ? ' rb-ctx' : ''}" data-rb-tab="${t.key}">${t.contextual && t.icon ? icon(t.icon) : ''}<span>${t.label}</span></button>`).join('');
-  }
-
-  function renderBody(list) {
-    const tab = list.find(t => t.key === activeKey);
-    if (!tab) { bodyEl.innerHTML = ''; return; }
-    const groups = [];
-    tab.parts.forEach(p => (p.groups ? p.groups() : []).forEach(g => g && groups.push(g)));
-    bodyEl.innerHTML = groups.map(g =>
-      `<section class="rb-group${g.cls ? ' ' + g.cls : ''}"><div class="rb-group-body">${g.html}</div><div class="rb-group-label">${g.label}</div></section>`).join('') +
-      `<button type="button" class="rb-collapse" title="Ribbon inklappen (dubbelklik op een tabblad)">${icon('chevron-up')}</button>`;
-    tab.parts.forEach(p => p.wire && p.wire(bodyEl));
-  }
-
-  function render() {
-    if (!root) return;
-    const list = allTabs();
-    if (!list.some(t => t.key === activeKey) || (auto && !list.some(t => t.key === activeKey && t.contextual))) {
-      const pick = [lastPlainKey, 'start'].find(k => list.some(t => t.key === k));
-      activeKey = pick || (list.find(t => !t.contextual) || {}).key || null;
-    }
-    renderTabs(list);
-    renderBody(list);
-    root.classList.toggle('rb-collapsed', collapsed);
-    if (notified !== activeKey) { notified = activeKey; listeners.forEach(fn => fn(activeKey)); }
-  }
-
-  function activate(key) {
-    const list = allTabs();
-    const tab = list.find(t => t.key === key);
-    if (!tab) return;
-    activeKey = key;
-    auto = false;
-    if (!tab.contextual) lastPlainKey = key;
-    if (collapsed) { collapsed = false; savePref(); }
-    render();
-    tab.parts.forEach(p => p.onShow && p.onShow());
-  }
-
-  function savePref() { try { localStorage.setItem(PREF_KEY, collapsed ? '1' : '0'); } catch (e) { } }
-
-  function init(el) {
-    root = el;
-    try { collapsed = localStorage.getItem(PREF_KEY) === '1'; } catch (e) { collapsed = false; }
-    tabsEl = el.querySelector('.rb-tabs');
-    bodyEl = el.querySelector('.rb-body');
-    tabsEl.addEventListener('click', (e) => {
-      const b = e.target.closest('[data-rb-tab]');
-      if (!b) return;
-      if (b.dataset.rbTab === activeKey && collapsed) { collapsed = false; savePref(); render(); return; }
-      activate(b.dataset.rbTab);
-    });
-    tabsEl.addEventListener('dblclick', (e) => {
-      if (!e.target.closest('[data-rb-tab]')) return;
-      collapsed = !collapsed; savePref(); render();
-    });
-    bodyEl.addEventListener('click', (e) => {
-      if (e.target.closest('.rb-collapse')) { collapsed = true; savePref(); render(); }
-    });
-    render();
-  }
-
-  function setSource(name, tabs, opts) {
-    sources[name] = tabs || [];
-    const ctx = (tabs || []).find(t => t.contextual);
-    if (opts && opts.focus && ctx) { activeKey = ctx.key; if (collapsed) { collapsed = false; savePref(); } }
-    render();
-    if (opts && opts.focus && ctx && ctx.onShow) ctx.onShow();
-  }
-
-  function onChange(fn) { listeners.push(fn); return () => { const i = listeners.indexOf(fn); if (i >= 0) listeners.splice(i, 1); }; }
-
-  return { init, setSource, activate, refresh: render, active: () => activeKey, onChange, big, small, kv };
-})();

js/core/skybox.js

@@ -161,32 +161,26 @@ window.Skybox = (() => {
   function createToggle(toolbar, onChange) {
     let m = getMode();
     const wrap = document.createElement('div');
-    wrap.className = 'view-filter';
-    wrap.innerHTML = `<button type="button" class="btn-3d-toggle vf-btn" title="Omgeving"></button>
-      <div class="vf-menu">${MODES.map(k => `<div class="vf-item vf-option" data-mode="${k}"><i class="bi bi-${LABELS[k][0]}"></i>${LABELS[k][1]}</div>`).join('')}</div>`;
+    wrap.className = 'tb-pop-wrap';
+    wrap.innerHTML = `<button type="button" class="tb-btn" title="Omgeving in 3D"></button>
+      <div class="tb-pop">${MODES.map(k => `<button type="button" class="pop-option" data-mode="${k}"><i class="bi bi-${LABELS[k][0]}"></i>${LABELS[k][1]}</button>`).join('')}</div>`;
     toolbar.appendChild(wrap);
-    const btn = wrap.querySelector('.vf-btn'), menu = wrap.querySelector('.vf-menu');
+    const btn = wrap.querySelector('.tb-btn'), menu = wrap.querySelector('.tb-pop');
+    const close = UI.popover(btn, menu);
     const sync = () => {
-      btn.innerHTML = `<i class="bi bi-${LABELS[m][0]}"></i>${LABELS[m][1]}<i class="bi bi-chevron-down"></i>`;
-      menu.querySelectorAll('.vf-option').forEach(o => o.classList.toggle('active', o.dataset.mode === m));
+      btn.innerHTML = `<i class="bi bi-${LABELS[m][0]}"></i><span>${LABELS[m][1]}</span><i class="bi bi-chevron-down tb-caret"></i>`;
+      menu.querySelectorAll('.pop-option').forEach(o => o.classList.toggle('active', o.dataset.mode === m));
     };
-    btn.addEventListener('click', (e) => { e.stopPropagation(); menu.classList.toggle('open'); });
     menu.addEventListener('click', (e) => {
-      e.stopPropagation();
-      const opt = e.target.closest('.vf-option');
+      const opt = e.target.closest('.pop-option');
       if (!opt) return;
-      menu.classList.remove('open');
+      close();
       if (opt.dataset.mode === m) return;
       m = opt.dataset.mode;
       remember(m);
       sync();
       onChange(m);
     });
-    const closeOnOutside = () => {
-      if (!document.body.contains(wrap)) { document.removeEventListener('click', closeOnOutside); return; }
-      menu.classList.remove('open');
-    };
-    document.addEventListener('click', closeOnOutside);
     sync();
     return wrap;
   }

js/core/ui-kit.js

@@ -80,8 +80,10 @@ window.UI = (() => {
   const info = (text) => `<div class="ui-info">${icon('info-circle')}<span>${text}</span></div>`;
   const warn = (text) => `<div class="ui-warn">${icon('exclamation-triangle')}<span>${text}</span></div>`;
   const grid = (...cols) => `<div class="ui-grid">${cols.map(c => `<div>${c}</div>`).join('')}</div>`;
-  const button = (label, iconName, attrs, cls) =>
-    `<button type="button" class="ui-btn${cls ? ' ' + cls : ''}" ${attrs || ''}>${iconName ? icon(iconName) : ''}<span>${label}</span></button>`;
+  // Eén knopbouwer; base = de knopsoort (ui-btn, tb-btn, ins-btn …), cls = extra klassen.
+  const btnOf = (base) => (label, iconName, attrs, cls) =>
+    `<button type="button" class="${base}${cls ? ' ' + cls : ''}" ${attrs || ''}>${iconName ? icon(iconName) : ''}${label ? `<span>${label}</span>` : ''}</button>`;
+  const button = btnOf('ui-btn');
   const actions = (...btns) => `<div class="ui-actions">${btns.join('')}</div>`;
 
   const activeTabs = {};
@@ -128,16 +130,79 @@ window.UI = (() => {
     if (el) el.addEventListener('change', (e) => { fn(e.target.checked); after && after(); });
   }
 
-  function cycle3D(el) {
-    el.classList.remove('fullscreen-2d');
-    if (!el.classList.contains('fullscreen-3d')) el.classList.add('fullscreen-3d');
-    else if (!el.classList.contains('render-only')) el.classList.add('render-only');
-    else el.classList.remove('fullscreen-3d', 'render-only');
-  }
-  function toggle2D(el) {
-    el.classList.remove('fullscreen-3d', 'render-only');
-    el.classList.toggle('fullscreen-2d');
+  // Weergave van een editor: klassen fullscreen-2d/-3d op het editor-element (de looptocht bewaart en herstelt className).
+  const VIEWS = [
+    { key: 'split', icon: 'layout-split', label: '2D + 3D', key1: '1' },
+    { key: '2d', icon: 'square', label: 'Alleen 2D', key1: '2' },
+    { key: '3d', icon: 'box', label: 'Alleen 3D', key1: '3' }
+  ];
+  const viewOf = (el) => el.classList.contains('fullscreen-3d') ? '3d' : el.classList.contains('fullscreen-2d') ? '2d' : 'split';
+  function setView(el, mode) {
+    el.classList.toggle('fullscreen-3d', mode === '3d');
+    el.classList.toggle('fullscreen-2d', mode === '2d');
+    el.classList.remove('render-only');
+    el.querySelectorAll('[data-view]').forEach(b => b.classList.toggle('active', b.dataset.view === mode));
   }
 
-  return { esc, icon, hint, num, range, onRange, setRange, sel, toggle, color, onColor, text, onText, section, info, warn, grid, button, actions, tabs, wireTabs, specCard, onNum, onSel, onToggle, cycle3D, toggle2D };
+  const tb = btnOf('tb-btn');
+  const tbSep = () => '<span class="tb-sep"></span>';
+  const viewSeg = (mode) => `<div class="tb-seg" role="group" aria-label="Weergave">${VIEWS.map(v =>
+    tb('', v.icon, `data-view="${v.key}" title="${v.label} (${v.key1})"`, v.key === mode ? 'active' : '')).join('')}</div>`;
+
+  // Werkbalk van een editor: [left] … [Lagen, Omgeving] [after] | [2D + 3D, 2D, 3D]. Gedeeld door woning, wand en vloer.
+  // o: left/after (html), onResize, layers (opties voor ViewLayers.createMenu), onSky, beforeView(mode).
+  function editorBar(toolbar, root, o) {
+    toolbar.innerHTML = `${o.left || ''}<div class="tb-spacer"></div><div class="tb-group tb-view"></div>${o.after || ''}${tbSep()}${viewSeg(viewOf(root))}`;
+    const group = toolbar.querySelector('.tb-view');
+    if (o.layers) ViewLayers.createMenu(group, o.layers);
+    if (o.onSky) Skybox.createToggle(group, o.onSky);
+    const bar = {
+      setView(mode) {
+        if (o.beforeView) o.beforeView(mode);
+        setView(root, mode);
+        requestAnimationFrame(o.onResize);
+      },
+      viewState: () => ({ view: viewOf(root) })
+    };
+    toolbar.querySelectorAll('[data-view]').forEach(b => b.addEventListener('click', () => bar.setView(b.dataset.view)));
+    return bar;
+  }
+
+  // Eén uitklapper tegelijk (popover of menu): wie opent, sluit de vorige. claim bij openen, release bij sluiten.
+  let openPop = null;
+  function claim(close) { if (openPop && openPop !== close) openPop(); openPop = close; }
+  function release(close) { if (openPop === close) openPop = null; }
+  const closePopovers = () => { if (openPop) { openPop(); return true; } return false; };
+  document.addEventListener('click', () => closePopovers());
+
+  // Uitklappaneel onder een knop; sluit bij klik buiten, Esc of een andere uitklapper.
+  function popover(btn, panel) {
+    const close = () => { panel.classList.remove('open'); btn.classList.remove('open'); release(close); };
+    btn.addEventListener('click', (e) => {
+      e.stopPropagation();
+      if (panel.classList.contains('open')) { close(); return; }
+      claim(close);
+      panel.classList.add('open');
+      btn.classList.add('open');
+    });
+    panel.addEventListener('click', (e) => e.stopPropagation());
+    return close;
+  }
+
+  // Kaarten verdelen over kolommen van min. minW breed; telkens in de kortste kolom. Opnieuw aanroepen bij een andere breedte.
+  function masonry(el, minW, gap) {
+    if (!el) return;
+    gap = gap === undefined ? 12 : gap;
+    const cards = el._cards || (el._cards = [...el.children]);
+    const n = Math.max(1, Math.floor((el.clientWidth + gap) / (minW + gap)));
+    if (el._cols === n) return;
+    el._cols = n;
+    el.classList.add('ui-masonry');
+    const cols = Array.from({ length: n }, () => { const c = document.createElement('div'); c.className = 'ui-masonry-col'; return c; });
+    el.replaceChildren(...cols);
+    cards.forEach(card => cols.reduce((a, b) => b.offsetHeight < a.offsetHeight ? b : a).appendChild(card));
+  }
+
+  return { esc, icon, hint, num, range, onRange, setRange, sel, toggle, color, onColor, text, onText, section, info, warn, grid, button, actions, tabs, wireTabs, specCard, onNum, onSel, onToggle, btnOf,
+    VIEWS, viewOf, setView, tb, tbSep, viewSeg, editorBar, popover, claim, release, closePopovers, masonry };
 })();

js/core/view-filter.js

@@ -1,43 +0,0 @@
-/*!
- * Tectum
- * Copyright © 2026 Machiel Heinen.
- * Alle rechten voorbehouden. Gebruik uitsluitend met schriftelijke toestemming.
- * Zie LICENTIE.md.
- */
-
-function createViewFilter(toolbar, items, onChange) {
-  const state = {};
-  items.forEach(it => { state[it.key] = it.checked !== false; });
-
-  const wrap = document.createElement('div');
-  wrap.className = 'view-filter';
-  wrap.innerHTML = `
-    <button type="button" class="btn-3d-toggle vf-btn"><i class="bi bi-eye"></i>Weergave<i class="bi bi-chevron-down"></i></button>
-    <div class="vf-menu">
-      ${items.map(it => `<label class="vf-item"><input type="checkbox" data-key="${it.key}" ${state[it.key] ? 'checked' : ''}> ${it.label}</label>`).join('')}
-    </div>`;
-  toolbar.insertBefore(wrap, toolbar.firstChild);
-
-  const menu = wrap.querySelector('.vf-menu');
-  const btn = wrap.querySelector('.vf-btn');
-  btn.addEventListener('click', (e) => {
-    e.stopPropagation();
-    menu.classList.toggle('open');
-    btn.classList.toggle('active', menu.classList.contains('open'));
-  });
-  menu.addEventListener('click', (e) => e.stopPropagation());
-  menu.addEventListener('change', (e) => {
-    const key = e.target.dataset.key;
-    if (!key) return;
-    state[key] = e.target.checked;
-    onChange(Object.assign({}, state));
-  });
-  const closeOnOutside = () => {
-    if (!document.body.contains(wrap)) { document.removeEventListener('click', closeOnOutside); return; }
-    menu.classList.remove('open');
-    btn.classList.remove('active');
-  };
-  document.addEventListener('click', closeOnOutside);
-
-  return { state: () => Object.assign({}, state) };
-}

js/core/view-layers.js

@@ -0,0 +1,115 @@
+/*!
+ * Tectum
+ * Copyright © 2026 Machiel Heinen.
+ * Alle rechten voorbehouden. Gebruik uitsluitend met schriftelijke toestemming.
+ * Zie LICENTIE.md.
+ */
+
+window.ViewLayers = (() => {
+  // phase: bouwvolgorde voor de snelkeuze "Fase" (en IFC); lagen zonder phase blijven daarbij aan.
+  const LIST = [
+    { key: 'regelwerk', label: 'Regelwerk', icon: 'grid-3x3', phase: 0, hint: 'Vloer-, wand- en dakbalken, stalen nokbalk' },
+    { key: 'elektra', label: 'Elektra', icon: 'lightning-charge', phase: 1, hint: 'Meterkast, buizen, dozen, schakelaars en wcd\'s' },
+    { key: 'beplating', label: 'Beplating', icon: 'square', phase: 2, hint: 'Spaanplaat binnen, OSB vloer, plafond en dakbeschot, cementplaat buiten' },
+    { key: 'doek', label: 'Vochtdoek', icon: 'droplet', phase: 3, hint: 'Vochtdoek op de buitenzijde' },
+    { key: 'latwerk', label: 'Latwerk', icon: 'distribute-vertical', phase: 4, hint: 'Kruislat en trasraamplaat' },
+    { key: 'gevel', label: 'Gevelbekleding', icon: 'bricks', phase: 5, hint: 'Rabat, felsplaten, steenstrips, stuc, schoorsteen, sandwichpanelen' },
+    { key: 'kozijnen', label: 'Kozijnen', icon: 'window', phase: 5, hint: 'Kozijnen, deuren en glas' },
+    { key: 'dakbedekking', label: 'Dakbedekking', icon: 'house-up', phase: 5, hint: 'Dakleer of riet' },
+    { key: 'afwerking', label: 'Afwerking', icon: 'brush', phase: 6, hint: 'Vloerafwerking, verf, plafond, dakrand, dagkanten, logobord' },
+    { key: 'lampen', label: 'Verlichting', icon: 'lightbulb', phase: 6, hint: 'Gevellampen, spots en binnenverlichting' },
+    { key: 'inrichting', label: 'Inrichting', icon: 'lamp', phase: 6, hint: 'Sanitair, keuken, kasten, bed, zithoek' },
+    { key: 'ruimtes', label: 'Ruimtes', icon: 'bounding-box', phase: 6, hint: 'Ruimtes met functie, vloer en wandpanelen' },
+    { key: 'dak', label: 'Dak', icon: 'house', hint: 'Het hele dak met dakrand, overkapping en palen; uit om van boven in de woning te kijken' },
+    { key: 'maten', label: 'Maten', icon: 'rulers', hint: 'Maatvoering in de plattegrond' }
+  ];
+  const KEYS = LIST.map(l => l.key);
+  const PHASES = ['Regelwerk', 'Elektra', 'Beplating', 'Vochtdoek', 'Latwerk', 'Gevel & dak', 'Afgewerkt'];
+
+  const all = () => Object.fromEntries(KEYS.map(k => [k, true]));
+  const normalize = (layers) => Object.fromEntries(KEYS.map(k => [k, !layers || layers[k] !== false]));
+  const shows = (layers, key) => !layers || layers[key] !== false;
+  // Alles tot en met een bouwfase (0..6), zoals de vroegere bouwfase-schuif.
+  const upTo = (phase) => Object.fromEntries(LIST.map(l => [l.key, l.phase === undefined || l.phase <= phase]));
+  const phaseOf = (layers) => PHASES.findIndex((_, p) => LIST.every(l => l.phase === undefined || (l.phase <= p) === shows(layers, l.key)));
+
+  // Verbergt meshes met een van de materialen (ook afgeleide met userData.base), bijv. het regelwerk.
+  function hideByMaterial(group, materials) {
+    if (!group) return;
+    const set = new Set(materials.filter(Boolean));
+    group.traverse(o => {
+      if (!o.isMesh) return;
+      const m0 = Array.isArray(o.material) ? o.material[0] : o.material;
+      if (m0 && (set.has(m0) || set.has(m0.userData && m0.userData.base))) o.visible = false;
+    });
+  }
+
+  const GROUPS = [
+    ['Casco', ['regelwerk', 'elektra', 'beplating', 'doek', 'latwerk']],
+    ['Buiten', ['gevel', 'kozijnen', 'dakbedekking', 'dak']],
+    ['Binnen', ['afwerking', 'lampen', 'inrichting', 'ruimtes']],
+    ['Plattegrond', ['maten']]
+  ];
+
+  // De enige plek voor zichtbaarheid: knop "Lagen" in de werkbalk met een uitklappaneel.
+  // keys beperkt de lagen (wand-editor); extras zijn editor-eigen schakelaars, bijv. beplating binnen/buiten.
+  function createMenu(toolbar, o) {
+    const items = o.keys ? LIST.filter(l => o.keys.includes(l.key)) : LIST;
+    const extras = o.extras || [];
+    const extra = Object.fromEntries(extras.map(x => [x.key, x.checked !== false]));
+    const check = (attr, key, label, hint, ic) =>
+      `<label class="pop-check" title="${hint || ''}"><input type="checkbox" ${attr}="${key}">${ic ? `<i class="bi bi-${ic}"></i>` : ''}<span>${label}</span></label>`;
+    const wrap = document.createElement('div');
+    wrap.className = 'tb-pop-wrap';
+    wrap.innerHTML = `<button type="button" class="tb-btn" title="Zichtbaarheid van lagen in 2D en 3D"><i class="bi bi-layers"></i><span>Lagen</span><i class="bi bi-chevron-down tb-caret"></i></button>
+      <div class="tb-pop pop-layers">
+        ${items.length ? `<div class="pop-row">
+          <select class="pop-phase" title="Alles tot en met een bouwfase; Dak en Maten blijven zoals ze staan">
+            <option value="">Bouwfase…</option>${PHASES.map((p, i) => `<option value="${i}">${i + 1}. ${p}</option>`).join('')}
+          </select>
+          <button type="button" class="ui-btn" data-all>Alles</button>
+        </div>
+        <div class="pop-groups">${GROUPS.map(([label, keys]) => {
+          const g = items.filter(l => keys.includes(l.key));
+          return g.length ? `<div class="pop-group"><div class="pop-head">${label}</div>${g.map(l => check('data-layer', l.key, l.label, l.hint, l.icon)).join('')}</div>` : '';
+        }).join('')}</div>` : ''}
+        ${extras.length ? `<div class="pop-group"><div class="pop-head">${o.extrasLabel || 'Weergave'}</div>${extras.map(x => check('data-extra', x.key, x.label, x.hint)).join('')}</div>` : ''}
+      </div>`;
+    toolbar.appendChild(wrap);
+    const btn = wrap.querySelector('.tb-btn'), panel = wrap.querySelector('.tb-pop');
+    UI.popover(btn, panel);
+    let cur = normalize(o.layers);
+    const sel = panel.querySelector('.pop-phase');
+    const sync = () => {
+      panel.querySelectorAll('[data-layer]').forEach(c => { c.checked = cur[c.dataset.layer]; });
+      panel.querySelectorAll('[data-extra]').forEach(c => { c.checked = extra[c.dataset.extra]; });
+      if (sel) { const p = phaseOf(cur); sel.value = p >= 0 ? String(p) : ''; }
+      const hidden = items.some(l => !cur[l.key]) || extras.some(x => !extra[x.key]);
+      btn.classList.toggle('flag', hidden);
+    };
+    const emit = () => { sync(); o.onChange && o.onChange(Object.assign({}, cur)); };
+    panel.addEventListener('change', (e) => {
+      const t = e.target;
+      if (t.dataset.layer) { cur = Object.assign({}, cur, { [t.dataset.layer]: t.checked }); emit(); }
+      else if (t.dataset.extra) { extra[t.dataset.extra] = t.checked; sync(); o.onExtra && o.onExtra(Object.assign({}, extra)); }
+      else if (t === sel && sel.value !== '') {
+        const keep = Object.fromEntries(LIST.filter(l => l.phase === undefined).map(l => [l.key, cur[l.key]]));
+        cur = Object.assign(upTo(Number(sel.value)), keep);
+        emit();
+      }
+    });
+    // Alles = ook de editor-eigen schakelaars weer aan.
+    const all = panel.querySelector('[data-all]');
+    if (all) all.addEventListener('click', () => {
+      const extraOff = extras.some(x => !extra[x.key]);
+      extras.forEach(x => { extra[x.key] = true; });
+      cur = ViewLayers.all();
+      emit();
+      if (extraOff && o.onExtra) o.onExtra(Object.assign({}, extra));
+    });
+    sync();
+    return { el: wrap, set: (l) => { cur = normalize(l); sync(); } };
+  }
+
+  return { LIST, KEYS, PHASES, GROUPS, all, normalize, shows, upTo, phaseOf, hideByMaterial, createMenu };
+})();

js/core/zip-writer.js

@@ -0,0 +1,70 @@
+/*!
+ * Tectum
+ * Copyright © 2026 Machiel Heinen.
+ * Alle rechten voorbehouden. Gebruik uitsluitend met schriftelijke toestemming.
+ * Zie LICENTIE.md.
+ */
+// ZIP zonder compressie (stored): meerdere bestanden in één download.
+
+window.ZipWriter = (() => {
+  const CRC = new Uint32Array(256);
+  for (let n = 0; n < 256; n++) {
+    let c = n;
+    for (let k = 0; k < 8; k++) c = c & 1 ? 0xedb88320 ^ (c >>> 1) : c >>> 1;
+    CRC[n] = c >>> 0;
+  }
+  function crc32(parts) {
+    let c = 0xffffffff;
+    parts.forEach(b => { for (let i = 0; i < b.length; i++) c = CRC[(c ^ b[i]) & 0xff] ^ (c >>> 8); });
+    return (c ^ 0xffffffff) >>> 0;
+  }
+
+  // files: [{ name, data: Uint8Array | Uint8Array[] }]
+  function build(files) {
+    const enc = new TextEncoder();
+    const out = [], central = [];
+    let offset = 0;
+    const d = new Date();
+    const time = (d.getHours() << 11) | (d.getMinutes() << 5) | (d.getSeconds() >> 1);
+    const date = ((d.getFullYear() - 1980) << 9) | ((d.getMonth() + 1) << 5) | d.getDate();
+    files.forEach(f => {
+      const parts = Array.isArray(f.data) ? f.data : [f.data];
+      const size = parts.reduce((a, b) => a + b.length, 0);
+      const name = enc.encode(f.name), crc = crc32(parts);
+      const head = (sig, extra) => {
+        const h = new DataView(new ArrayBuffer(extra ? 46 : 30));
+        let p = 0;
+        const u32 = (v) => { h.setUint32(p, v, true); p += 4; }, u16 = (v) => { h.setUint16(p, v, true); p += 2; };
+        u32(sig);
+        if (extra) u16(20);
+        u16(20); u16(0x0800); u16(0); u16(time); u16(date); u32(crc); u32(size); u32(size); u16(name.length); u16(0);
+        if (extra) { u16(0); u16(0); u16(0); u32(0); u32(offset); }
+        return new Uint8Array(h.buffer);
+      };
+      const local = head(0x04034b50, false);
+      central.push(head(0x02014b50, true), name);
+      out.push(local, name, ...parts);
+      offset += local.length + name.length + size;
+    });
+    const cdSize = central.reduce((a, b) => a + b.length, 0);
+    const end = new DataView(new ArrayBuffer(22));
+    end.setUint32(0, 0x06054b50, true);
+    end.setUint16(8, files.length, true); end.setUint16(10, files.length, true);
+    end.setUint32(12, cdSize, true); end.setUint32(16, offset, true);
+    return out.concat(central, [new Uint8Array(end.buffer)]);
+  }
+
+  function save(files, filename) {
+    const blob = new Blob(build(files), { type: 'application/zip' });
+    const url = URL.createObjectURL(blob);
+    const a = document.createElement('a');
+    a.href = url;
+    a.download = filename;
+    document.body.appendChild(a);
+    a.click();
+    document.body.removeChild(a);
+    URL.revokeObjectURL(url);
+  }
+
+  return { build, save };
+})();

js/cost/cost-defaults.js

@@ -95,7 +95,9 @@ window.COST_DEFAULTS = {
       steenM2: { label: 'Steenstrips (gevel + trasraam)', unit: '€/m²', value: 60 },
       steenMontage: { label: 'Montage steenstrips', unit: 's/m²', value: 1800 },
       stucM2: { label: 'Stucwerk gevel (wapening + sierpleister op cementgebonden plaat)', unit: '€/m²', value: 45 },
-      stucMontage: { label: 'Stucwerk aanbrengen (wapenen, pleisteren)', unit: 's/m²', value: 1500 }
+      stucMontage: { label: 'Stucwerk aanbrengen (wapenen, pleisteren)', unit: 's/m²', value: 1500 },
+      felsM2: { label: 'Felsplaten gevel, staande naad (staal, klangen, ondergrond)', unit: '€/m²', value: 70 },
+      felsMontage: { label: 'Montage felsplaten gevel (ook dagkanten en hoeken)', unit: 's/m²', value: 2100 }
     }
   },
 
@@ -120,7 +122,12 @@ window.COST_DEFAULTS = {
       nokOplegging: { label: 'Oplegging nokbalk (stalen schoen + bouten), 2 per balk', unit: '€/st.', value: 45 },
       nokPlaatsen: { label: 'Stalen nokbalk plaatsen, stellen en vastzetten', unit: 's', value: 2700 },
       nokVulhoutMontage: { label: 'Vulhout in de holling van de nokbalk aanbrengen (beide zijden)', unit: 's/m', value: 240 },
-      nokPersoneel: { label: 'Personeel bij plaatsen nokbalk (i.p.v. de bezetting)', unit: 'man', value: 3 }
+      nokPersoneel: { label: 'Personeel bij plaatsen nokbalk (i.p.v. de bezetting)', unit: 'man', value: 3 },
+      paalHoutM3: { label: 'Paalhout overkapping (eiken, geschaafd)', unit: '€/m³', value: 2400 },
+      paalvoet: { label: 'Paalvoet verzinkt, verstelbaar (incl. ankers)', unit: '€/st.', value: 40 },
+      paalMontage: { label: 'Paal plaatsen: stellen, aftoppen, vastzetten aan het dak', unit: 's/st.', value: 2700 },
+      zijwandM2: { label: 'Zijwand overkapping (regelwerk, cementgebonden plaat en stuc aan beide kanten, fundering)', unit: '€/m²', value: 140 },
+      zijwandMontage: { label: 'Zijwand overkapping maken en plaatsen', unit: 's/m²', value: 5400 }
     }
   },
 

js/cost/cost-model.js

@@ -155,6 +155,8 @@ window.CostModel = (() => {
       add(el, 'Gevel', 'Gevel', `Vochtdoek (${fmtM(doekM)} m¹ wand)`, doek, 'm²', doek * G.vochtdoekM2, doekM * G.vochtdoekMontageM);
       const rabat = p.buitenMateriaal === 'vochtdoek' ? (st.rabatAreaM2 || 0) : 0;
       add(el, 'Gevel', 'Gevel', 'Rabat', rabat, 'm²', rabat * G.rabatM2, rabat * G.rabatMontage);
+      const fels = p.buitenMateriaal === 'vochtdoek' ? (st.felsAreaM2 || 0) : 0;
+      add(el, 'Gevel', 'Gevel', 'Felsplaten (staande naad)', fels, 'm²', fels * (G.felsM2 || 0), fels * (G.felsMontage || 0));
       const steen = (st.stoneAreaM2 || 0) + (st.trasraamStoneAreaM2 || 0);
       add(el, 'Gevel', 'Gevel', 'Steenstrips', steen, 'm²', steen * G.steenM2, steen * G.steenMontage);
       const stuc = st.stucAreaM2 || 0;
@@ -167,7 +169,7 @@ window.CostModel = (() => {
       const opKey = p.seam ? `iw${p.id}` : null;
       if (!opKey || !seenOpenings.has(opKey)) {
         if (opKey) seenOpenings.add(opKey);
-        (p.config.openings || []).forEach(op => {
+        (p.config.openings || []).filter(op => op.type !== 'schoorsteen').forEach(op => {
           const fill = KozijnModel.normalize(op.fill);
           if (fill && fill.type === 'schuifdeur') {
             add(el, 'Kozijnen', 'Kozijnen', `Schuifdeur ${op.w}×${op.h} (${fill.leaves} blad${fill.leaves > 1 ? 'en' : ''}, ${fill.mount === 'opbouw' ? 'op de wand' : 'in de wand'})`,
@@ -206,13 +208,13 @@ window.CostModel = (() => {
 
       const rf = newEl(`${u.id}-D`, `Unit ${u.id} dak`, u.id);
       const rs = u.roof.specs, D = S.dak;
-      add(rf, 'Hout', 'Zagen', 'Dakbalken', rs.joistWoodM3, 'm³', joistWoodCost(rs.joistWoodM3, u.roof.planes[0] && u.roof.planes[0].data.calcData), 0);
-      u.roof.planes.forEach((pl, i) => joistLayer(rf, pl.data.calcData, Math.round(Math.abs(pl.theta || 0) * 180 / Math.PI * 10) / 10, u.roof.planes.length > 1 ? `Dak ${i + 1} ` : 'Dak', true));
       const cap = u.roof.unitRoof && u.roof.unitRoof.cap;
+      add(rf, 'Hout', 'Zagen', 'Dakbalken', rs.joistWoodM3, 'm³', joistWoodCost(rs.joistWoodM3, u.roof.planes[0] ? u.roof.planes[0].data.calcData : cap), 0);
+      u.roof.planes.forEach((pl, i) => joistLayer(rf, pl.data.calcData, Math.round(Math.abs(pl.theta || 0) * 180 / Math.PI * 10) / 10, u.roof.planes.length > 1 ? `Dak ${i + 1} ` : 'Dak', true));
       if (cap) {
-        const n = cap.beams.length;
-        add(rf, 'Hout', 'Zagen', `${sawLabel}: wolfseinden ${n} balken`, 2 * n, 'sneden', 0, cap.beams.reduce((t, bm) => t + sawSec([bm.angle, bm.angle], 1), 0));
-        addJoints(rf, n * V.verbindingenPerVloerbalk, 'wolfseindbalken', true);
+        const n = cap.beams.length, join = cap.kind === 'join';
+        add(rf, 'Hout', 'Zagen', `${sawLabel}: ${join ? 'dak (sporen, kepers)' : 'wolfseinden'} ${n} balken`, 2 * n, 'sneden', 0, cap.beams.reduce((t, bm) => t + sawSec([bm.angle, bm.angle], 1), 0));
+        addJoints(rf, n * V.verbindingenPerVloerbalk, join ? 'dakbalken' : 'wolfseindbalken', true);
       }
       addSheet(rf, 'Plaatwerk', 'OSB plafond', rs.osbAreaM2, P.osbM2, P.osbMontage);
       addSheet(rf, 'Plaatwerk', `Dakbeschot OSB ${RoofModel.BESCHOT_MM} mm`, rs.beschotM2 || 0, D.beschotM2, D.beschotMontage);
@@ -230,7 +232,7 @@ window.CostModel = (() => {
       }
     });
 
-    const wo = newEl('WON', 'Woning (dakrand, fundering, verlichting)', null);
+    const wo = newEl('WON', 'Woning (dakrand, overkapping, fundering, verlichting)', null);
     const D = S.dak;
     if (totals.roofEdge) {
       const e = totals.roofEdge;
@@ -238,6 +240,16 @@ window.CostModel = (() => {
       add(wo, 'Dak', 'Dak', 'Onderplaat boeideel', e.soffitM2, 'm²', e.soffitM2 * D.onderplaatM2, e.soffitM2 * D.onderplaatMontage);
       add(wo, 'Dak', 'Dak', `Daktrim ${e.trimHeight} mm`, e.trimLengthM, 'm', e.trimLengthM * D.daktrimM, e.trimLengthM * D.daktrimMontage);
     }
+    if (totals.posts) {
+      const pp = totals.posts;
+      add(wo, 'Hout', 'Dak', `${pp.wood} palen ${pp.size}×${pp.size} mm (${pp.count} st.)`, pp.lengthM, 'm', pp.m3 * D.paalHoutM3, pp.count * D.paalMontage);
+      add(wo, 'Staal', 'Dak', 'Paalvoeten', pp.count, 'st.', pp.count * D.paalvoet, 0);
+      add(wo, 'Gevel', 'Dak', `Zijwand overkapping (${pp.walls || 0} st.)`, pp.wallM2 || 0, 'm²', (pp.wallM2 || 0) * (D.zijwandM2 || 0), (pp.wallM2 || 0) * (D.zijwandMontage || 0));
+      // Buitenkant zoals de gevel ernaast (stuc zit al in de zijwand).
+      const G = S.gevel, oo = pp.outsideM2 || {};
+      [['fels', 'felsplaten', G.felsM2, G.felsMontage], ['rabat', 'rabat', G.rabatM2, G.rabatMontage], ['steen', 'steenstrips', G.steenM2, G.steenMontage]].forEach(([k, label, m2, sec]) =>
+        add(wo, 'Gevel', 'Gevel', `Zijwand overkapping buitenzijde ${label}`, oo[k] || 0, 'm²', (oo[k] || 0) * (m2 || 0), (oo[k] || 0) * (sec || 0)));
+    }
     if (parts.sandwich) {
       const sw = parts.sandwich;
       add(wo, 'Vloer', 'Vloer', `Sandwichpanelen (${sw.panelCount} platen)`, sw.areaM2, 'm²', sw.areaM2 * S.vloer.sandwichM2, sw.panelCount * S.vloer.sandwichMontage);
@@ -324,11 +336,10 @@ window.CostModel = (() => {
       const m = f.w / 1000, crew = IN.personeel;
       const perM = (what, price, sec) => add(el, 'Inrichting', 'Inrichting', `${what} ${f.w} mm`, m, 'm', m * (price || 0), m * (sec || 0), crew);
       if (f.cost === 'keuken') perM('Keukenblok', IN.keukenM, IN.keukenMontage);
-      else if (f.cost === 'kookeiland') {
-        perM('Kookeiland', IN.kookeilandM, IN.kookeilandMontage);
-        if (f.opts && f.opts.kookplaat) add(el, 'Inrichting', 'Inrichting', 'Inductiekookplaat', 1, 'st.', IN.kookplaat || 0, 0);
-      } else if (f.cost === 'kast') perM(f.label, IN.kastM, IN.kastMontage);
+      else if (f.cost === 'kookeiland') perM('Kookeiland', IN.kookeilandM, IN.kookeilandMontage);
+      else if (f.cost === 'kast') perM(f.label, IN.kastM, IN.kastMontage);
       else add(el, 'Inrichting', 'Inrichting', f.label, 1, 'st.', IN[f.cost] || 0, IN[f.cost + 'Montage'] || 0, crew);
+      if ((f.cost === 'keuken' || f.cost === 'kookeiland') && f.opts && f.opts.kookplaat) add(el, 'Inrichting', 'Inrichting', 'Inductiekookplaat', 1, 'st.', IN.kookplaat || 0, 0);
     });
 
     const sumLines = (lines) => lines.reduce((a, l) => ({ mat: a.mat + l.mat, sec: a.sec + l.sec, clock: a.clock + l.clock }), { mat: 0, sec: 0, clock: 0 });

js/cost/cost-settings.js

@@ -24,13 +24,13 @@ window.CostSettings = (() => {
         <div class="cs-body"></div>
         <div class="material-info">Bedragen excl. btw. De CSV's in kosten/ zijn leidend: Toepassen geldt tot herladen; om een wijziging te houden "intern.csv downloaden" en het bestand in kosten/ vervangen, of met "Wijzigingen downloaden" alleen de aangepaste velden (met de standaardwaarde ernaast) opslaan. Prijzen pas je aan in leveranciers.csv (CSV = daaruit, anders noodwaarde). Een veld dat afwijkt van intern.csv is gemarkeerd.</div>
         <div class="modal-footer">
-          <button type="button" class="io-btn" data-cs="reset">Standaard</button>
-          <button type="button" class="io-btn" data-cs="export">intern.csv downloaden</button>
-          <button type="button" class="io-btn" data-cs="export-changes" title="Alleen de velden die afwijken van intern.csv">Wijzigingen downloaden</button>
-          <button type="button" class="io-btn" data-cs="import">Importeren&hellip;</button>
+          <button type="button" class="ui-btn" data-cs="reset">Standaard</button>
+          <button type="button" class="ui-btn" data-cs="export">intern.csv downloaden</button>
+          <button type="button" class="ui-btn" data-cs="export-changes" title="Alleen de velden die afwijken van intern.csv">Wijzigingen downloaden</button>
+          <button type="button" class="ui-btn" data-cs="import">Importeren&hellip;</button>
           <span style="flex:1"></span>
-          <button type="button" class="io-btn" data-cs="cancel">Annuleren</button>
-          <button type="button" class="material-toggle-btn active" data-cs="save" style="flex:none; padding:6px 18px;">Toepassen</button>
+          <button type="button" class="ui-btn" data-cs="cancel" data-esc>Annuleren</button>
+          <button type="button" class="ui-btn ui-btn-primary" data-cs="save">Toepassen</button>
         </div>
         <input type="file" data-file="import" accept=".csv,.json,text/csv,application/json,text/plain" style="display:none">
         <input type="file" data-file="leveranciers" accept=".csv,text/csv,text/plain" style="display:none">

js/elektra/elektra-model.js

@@ -12,6 +12,7 @@ window.ElektraModel = (() => {
     switchHeight: 1500,
     wcdHeight: 400,
     wcdPerUnit: 2,
+    plateColor: 'wit',    // schakelaars, wcd's, apparaat-wcd's en vloerdozen
     slack: 10,            // %
     reserve: 300,
     meterkastReserve: 500,
@@ -32,6 +33,11 @@ window.ElektraModel = (() => {
     droger: { label: 'Droger', code: 'DR', breaker: 'B16', cable: 'wcd', height: 1100, zone: 'techniek', material: 'Wandcontactdoos enkel met randaarde' },
     warmtepomp: { label: 'Warmtepomp', code: 'WP', breaker: 'B16', cable: 'wcd', height: 1200, zone: 'techniek', material: 'Werkschakelaar 2-polig (warmtepomp)' }
   };
+  const PLATE_COLORS = {
+    wit: { label: 'Wit', hex: 0xf6f6f2 },
+    antraciet: { label: 'Antraciet', hex: 0x3a3d41 },
+    zwart: { label: 'Zwart', hex: 0x161718 }
+  };
   const BOX_PITCH = 71;
   const PLATE = 80;
   const WCD_W = 150;
@@ -62,6 +68,7 @@ window.ElektraModel = (() => {
     s.removed = Array.isArray(i.removed) ? i.removed.slice() : [];
     s.vloerWcd = Array.isArray(i.vloerWcd) ? i.vloerWcd.filter(o => o && o.unitId).map(o => Object.assign({}, o)) : [];
     s.enabled = s.enabled !== false;
+    if (!PLATE_COLORS[s.plateColor]) s.plateColor = DEFAULT_SETTINGS.plateColor;
     // v2: schakelaars 1050 -> 1500 mm, wcd 300 -> 400 mm (oude standaard).
     if (!i.v) {
       if (i.switchHeight === 1050) s.switchHeight = DEFAULT_SETTINGS.switchHeight;
@@ -136,9 +143,68 @@ window.ElektraModel = (() => {
     return null;
   }
 
-  function makeRouter(units) {
+  // Gaat het stuk p→q (wereld, mm) door een raam of deur? Een wand telt over zijn dikte plus 5 mm, de opening 1 mm
+  // kleiner: een buis naast de opening of erboven/eronder mag.
+  function makeOpeningTest(units, interior) {
+    const pieces = [];
+    units.forEach(u => u.walls.forEach(w => w.pieces.forEach(p => { if (p.config.openings.length) pieces.push(p); })));
+    interior.forEach(p => { if (p.config.openings.length) pieces.push(p); });
+    const clip = (r, a, b, lo, hi) => {
+      const d = b - a;
+      if (Math.abs(d) < 1e-9) return a > lo && a < hi ? r : null;
+      let t0 = (lo - a) / d, t1 = (hi - a) / d;
+      if (t0 > t1) [t0, t1] = [t1, t0];
+      return Math.max(r[0], t0) < Math.min(r[1], t1) ? [Math.max(r[0], t0), Math.min(r[1], t1)] : null;
+    };
+    return (p, q) => pieces.some(pc => {
+      const pl = pc.place, c = Math.cos(pl.rotY), s = Math.sin(pl.rotY), half = pl.thickness / 2 + 5;
+      const loc = (v) => { const dx = v.x - pl.cx, dz = v.z - pl.cz; return { u: dx * c - dz * s + pl.width / 2, n: dx * s + dz * c, y: v.y - pl.floorTop }; };
+      const A = loc(p), B = loc(q);
+      const inWall = clip([0, 1], A.n, B.n, -half, half);
+      return !!inWall && pc.config.openings.some(op => {
+        let r = clip(inWall, A.u, B.u, op.x + 1, op.x + op.w - 1);
+        r = r && clip(r, A.y, B.y, op.y + 1, WallModel.openingTopMax(op) - 1);
+        if (!r) return false;
+        // Schuine bovenkant: alleen onder de daklijn van de opening.
+        return [0, 0.25, 0.5, 0.75, 1].some(k => {
+          const t = r[0] + (r[1] - r[0]) * k, u = A.u + (B.u - A.u) * t, y = A.y + (B.y - A.y) * t;
+          return y < WallModel.openingTopAt(op, u) - 1;
+        });
+      });
+    });
+  }
+
+  // rooms: leidingen lopen boven een vals plafond, niet tegen de onderkant van een hoog dak.
+  // blocked(p, q): het stuk gaat door een wandopening (makeOpeningTest).
+  function makeRouter(units, rooms, blocked) {
     const unitAt = (x, z) => units.find(u => x >= u.rect.x0 - 1 && x <= u.rect.x1 + 1 && z >= u.rect.z0 - 1 && z <= u.rect.z1 + 1) || null;
-    const ceilAt = (x, z) => {
+    // Vals plafond (mm boven vloer) van de ruimte op (x,z): undefined = in een wand of naad (geen gebied), null = geen
+    // vals plafond (ook een gebied zonder functie: niet het plafond van de buurruimte door de wand heen overnemen).
+    const roomPlenum = (x, z) => {
+      if (!rooms || !rooms.roomAt) return undefined;
+      const r = rooms.roomAt(x, z);
+      if (r) return r.ceilingActive ? r.ceiling : null;
+      return rooms.regionAt && rooms.regionAt(x, z) ? null : undefined;
+    };
+    // Absoluut; in een binnenwand het laagste valse plafond ernaast: de leiding gaat daar door de wand, niet omhoog.
+    const plenumAt = (x, z) => {
+      const u = unitAt(x, z);
+      if (!u) return null;
+      let v = roomPlenum(x, z);
+      if (v === undefined) {
+        v = null;
+        [[1, 0], [-1, 0], [0, 1], [0, -1]].forEach(([dx, dz]) => {
+          for (const d of [60, 120, 200, 300]) {
+            const o = roomPlenum(x + dx * d, z + dz * d);
+            if (o === undefined) continue;
+            if (o !== null) v = v === null ? o : Math.min(v, o);
+            break;
+          }
+        });
+      }
+      return v === null ? null : u.layout.floorTop + v;
+    };
+    const roofCeilAt = (x, z) => {
       let u = unitAt(x, z);
       if (!u) u = units.reduce((best, c) => {
         const dx = Math.max(c.rect.x0 - x, 0, x - c.rect.x1), dz = Math.max(c.rect.z0 - z, 0, z - c.rect.z1);
@@ -148,24 +214,159 @@ window.ElektraModel = (() => {
       const r = u.rect;
       return u.roof.ceilingAt(Math.max(r.x0 + 1, Math.min(r.x1 - 1, x)), Math.max(r.z0 + 1, Math.min(r.z1 - 1, z)));
     };
+    // Leidingvlak: het valse plafond waar dat lager ligt dan het dak, anders de onderkant van het dak.
+    const plenumOn = (x, z) => { const v = plenumAt(x, z); return v !== null && v < roofCeilAt(x, z) - 1 ? v : null; };
+    const ceilAt = (x, z) => { const v = plenumOn(x, z); return v !== null ? v : roofCeilAt(x, z); };
+    const inPlenum = (x, z, y) => y < roofCeilAt(x, z) - 50;
+    // Over het plafond het vlak volgen: knikken in het dak (nok, kil) als tussenpunt, de overgang vals plafond/dak
+    // verticaal op de grens (in de wand), zodat de buis nooit los door de ruimte of buiten het dak loopt.
+    function followCeiling(pts) {
+      const same = (u, v) => (u === null && v === null) || (u !== null && v !== null && Math.abs(u - v) < 1);
+      const out = [pts[0]];
+      pts.slice(1).forEach((q, i) => {
+        const p = pts[i], len = Math.hypot(q.x - p.x, q.z - p.z);
+        if (p.ceil && q.ceil && !p.floor && !q.floor && len > 1) {
+          const at = (t) => ({ x: p.x + (q.x - p.x) * t, z: p.z + (q.z - p.z) * t });
+          const hOf = (pt, st) => st !== null ? st : roofCeilAt(pt.x, pt.z);
+          const mk = (pt, y) => Object.assign({}, p, pt, { y, wall: null, ceil: true, floor: false, plenum: inPlenum(pt.x, pt.z, y) });
+          const n = Math.max(2, Math.ceil(len / 100));
+          // Begin/eind op een wandvlak 50 mm de ruimte in meten, net als top(): anders telt de buurruimte achter de wand mee.
+          const probe = (pt, e) => e.wall && e.wall.n ? { x: pt.x + e.wall.n.x * 50, z: pt.z + e.wall.n.z * 50 } : pt;
+          const S = Array.from({ length: n + 1 }, (_, k) => {
+            const pt = at(k / n), pr = k === 0 ? probe(pt, p) : k === n ? probe(pt, q) : pt, st = plenumOn(pr.x, pr.z);
+            return { t: k / n, pt, st, y: hOf(pt, st) };
+          });
+          for (let k = 1; k <= n; k++) {
+            const A = S[k - 1], B = S[k];
+            if (!same(A.st, B.st)) {
+              let lo = A.t, hi = B.t;
+              for (let it = 0; it < 10; it++) { const m = (lo + hi) / 2, pm = at(m); if (same(plenumOn(pm.x, pm.z), A.st)) lo = m; else hi = m; }
+              const pb = at((lo + hi) / 2);
+              out.push(mk(pb, hOf(pb, A.st)), mk(pb, hOf(pb, B.st)));
+            } else if (k < n && same(B.st, S[k + 1].st) && Math.abs(A.y - 2 * B.y + S[k + 1].y) > 2) out.push(mk(B.pt, B.y));
+          }
+        }
+        out.push(q);
+      });
+      return out;
+    }
     const floorAt = (x, z) => { const u = unitAt(x, z) || units[0]; return u.layout.floorTop; };
+    const clampTo = (v, lo, hi) => lo > hi ? (lo + hi) / 2 : Math.max(lo, Math.min(hi, v));
+    const segInside = (p, q) => {
+      const n = Math.max(1, Math.ceil(Math.hypot(q.x - p.x, q.z - p.z) / 50));
+      for (let k = 0; k <= n; k++) if (!unitAt(p.x + (q.x - p.x) * k / n, p.z + (q.z - p.z) * k / n)) return false;
+      return true;
+    };
+    // Punt buiten de woning (gevellamp, dakrandspot): eerst loodrecht naar de dichtstbijzijnde unit.
+    const clampIn = (p) => {
+      if (unitAt(p.x, p.z)) return null;
+      let best = null;
+      units.forEach(u => {
+        const r = u.rect, x = clampTo(p.x, r.x0 + 1, r.x1 - 1), z = clampTo(p.z, r.z0 + 1, r.z1 - 1), d = Math.hypot(x - p.x, z - p.z);
+        if (!best || d < best.d) best = { x, z, d };
+      });
+      return best && { x: best.x, z: best.z };
+    };
+    // Knikpunten in de plattegrond tussen a en b (exclusief), haaks en binnen de units: bij een L- of T-vorm mag de
+    // knik niet in de lege hoek buiten de woning vallen. Eerst x dan z (zoals altijd), anders z dan x, anders via een unit.
+    function corners(a, b, viaCeiling) {
+      const A = clampIn(a), B = clampIn(b), pa = A || a, pb = B || b;
+      const cands = [[{ x: pb.x, z: pa.z }], [{ x: pa.x, z: pb.z }]];
+      units.forEach(u => {
+        const r = u.rect, xm = clampTo((pa.x + pb.x) / 2, r.x0 + 150, r.x1 - 150), zm = clampTo((pa.z + pb.z) / 2, r.z0 + 150, r.z1 - 150);
+        cands.push([{ x: xm, z: pa.z }, { x: xm, z: pb.z }], [{ x: pa.x, z: zm }, { x: pb.x, z: zm }]);
+      });
+      let best = null;
+      cands.forEach(c => {
+        const pts = [pa].concat(c, [pb]);
+        if (!pts.slice(1).every((q, i) => segInside(pts[i], q))) return;
+        let len = pts.slice(1).reduce((t, q, i) => t + Math.abs(q.x - pts[i].x) + Math.abs(q.z - pts[i].z), 0);
+        // Over het plafond telt op- en neergaan mee: liever door een laag vals plafond dan over de nok.
+        if (viaCeiling) pts.slice(1).forEach((q, i) => {
+          const p = pts[i], m = Math.max(1, Math.ceil(Math.hypot(q.x - p.x, q.z - p.z) / 200));
+          let prev = ceilAt(p.x, p.z);
+          for (let k = 1; k <= m; k++) { const y = ceilAt(p.x + (q.x - p.x) * k / m, p.z + (q.z - p.z) * k / m); len += Math.abs(y - prev); prev = y; }
+        });
+        if (!best || len < best.len - 1) best = { len, c };
+      });
+      return [A].concat(best ? best.c : cands[0], [B]).filter(Boolean)
+        .filter(q => Math.hypot(q.x - a.x, q.z - a.z) > 0.5 && Math.hypot(q.x - b.x, q.z - b.z) > 0.5);
+    }
+    const strictlyInside = (x, z) => units.some(u => x > u.rect.x0 + 5 && x < u.rect.x1 - 5 && z > u.rect.z0 + 5 && z < u.rect.z1 - 5);
+    const clear = (pts) => !blocked || pts.slice(1).every((q, i) => !blocked(pts[i], q));
+    // Wandpunt dat recht omhoog/omlaag door een raam of deur zou gaan (wcd onder een raam, meterkast onder een
+    // bovenlicht): eerst op dezelfde hoogte opzij tot naast de opening (stijl + 60 mm), de dichtstbijzijnde kant
+    // die vrij is. yTo(punt) = hoogte waar de leiding heen gaat. null = recht kan, of nergens plek.
+    function sidestep(p, yTo) {
+      const f = p.face;
+      if (!f || !blocked || !blocked(p, { x: p.x, y: yTo(p), z: p.z })) return null;
+      const y = p.y - f.piece.place.floorTop, u0 = uAt(f, p), lo = Math.min(y, yTo(p) - f.piece.place.floorTop);
+      const cands = [];
+      f.piece.config.openings.forEach(op => {
+        if (WallModel.openingTopMax(op) > lo) cands.push(op.x - f.sw - 60, op.x + op.w + f.sw + 60);
+      });
+      const pick = cands.filter(u => u > f.u0 + 50 && u < f.u1 - 50).sort((m, n) => Math.abs(m - u0) - Math.abs(n - u0)).find(u => {
+        const q = Object.assign({}, p, facePoint(f, u, y, 0));
+        return !blocked(p, q) && !blocked(q, { x: q.x, y: yTo(q), z: q.z });
+      });
+      return pick === undefined ? null : Object.assign({}, p, facePoint(f, pick, y, 0));
+    }
+    // Gevellamp naar gevellamp: langs de gevel (om de hoeken heen), nooit dwars door de woning.
+    function outside(a, b) {
+      const gap = (p) => Math.min(...units.map(u => Math.max(u.rect.x0 - p.x, 0, p.x - u.rect.x1) + Math.max(u.rect.z0 - p.z, 0, p.z - u.rect.z1)));
+      const d = Math.max(60, gap(a), gap(b));
+      const cands = [[{ x: b.x, z: a.z }], [{ x: a.x, z: b.z }]];
+      units.forEach(u => {
+        [u.rect.x0 - d, u.rect.x1 + d].forEach(x => cands.push([{ x, z: a.z }, { x, z: b.z }]));
+        [u.rect.z0 - d, u.rect.z1 + d].forEach(z => cands.push([{ x: a.x, z }, { x: b.x, z }]));
+      });
+      const free = (p, q) => {
+        const n = Math.max(1, Math.ceil(Math.hypot(q.x - p.x, q.z - p.z) / 50));
+        for (let k = 1; k < n; k++) if (strictlyInside(p.x + (q.x - p.x) * k / n, p.z + (q.z - p.z) * k / n)) return false;
+        return true;
+      };
+      let best = null;
+      cands.forEach(c => {
+        const pts = [a].concat(c, [b]);
+        if (!pts.slice(1).every((q, i) => free(pts[i], q))) return;
+        const len = pts.slice(1).reduce((t, q, i) => t + Math.abs(q.x - pts[i].x) + Math.abs(q.z - pts[i].z), 0);
+        if (!best || len < best.len - 1) best = { len, c };
+      });
+      return best ? best.c : [strictlyInside(b.x, a.z) ? { x: a.x, z: b.z } : { x: b.x, z: a.z }];
+    }
     function path(a, b) {
-      const P = (p, wall, ceil, floor) => ({ x: p.x, y: p.y, z: p.z, wall: wall || null, ceil: !!ceil, floor: !!floor });
+      const P = (p, wall, ceil, floor) => ({ x: p.x, y: p.y, z: p.z, wall: wall || null, ceil: !!ceil, floor: !!floor, plenum: !!ceil && inPlenum(p.x, p.z, p.y) });
       if (a.mount === 'vloer' || b.mount === 'vloer') {
         const fa = floorAt(a.x, a.z) - FLOOR_DEPTH, fb = floorAt(b.x, b.z) - FLOOR_DEPTH;
-        return [P(a, a.face, false, a.mount === 'vloer'), P({ x: a.x, y: fa, z: a.z }, a.face, false, true), P({ x: b.x, y: fa, z: a.z }, null, false, true),
-          P({ x: b.x, y: fb, z: b.z }, b.face, false, true), P(b, b.face, false, b.mount === 'vloer')];
+        const A2 = a.mount === 'vloer' ? null : sidestep(a, () => fa), B2 = b.mount === 'vloer' ? null : sidestep(b, () => fb);
+        const a2 = A2 || a, b2 = B2 || b;
+        return [P(a, a.face, false, a.mount === 'vloer')].concat(A2 ? [P(A2, a.face)] : [], [P({ x: a2.x, y: fa, z: a2.z }, a.face, false, true)])
+          .concat(corners(a2, b2).map(c => P({ x: c.x, y: fa, z: c.z }, null, false, true)),
+            [P({ x: b2.x, y: fb, z: b2.z }, b.face, false, true)], B2 ? [P(B2, b.face)] : [], [P(b, b.face, false, b.mount === 'vloer')]);
       }
-      if (a.face && a.face === b.face) return [P(a, a.face), P({ x: a.x, y: b.y, z: a.z }, a.face), P(b, b.face)];
-      if (a.mount === 'buiten' && b.mount === 'buiten') return [P(a), P({ x: b.x, y: a.y, z: a.z }), P(b)];
-      const top = (p) => p.mount === 'plafond' ? p.y : ceilAt(p.x, p.z);
-      const ya = top(a), yb = top(b), dropB = Math.abs(yb - b.y) > 1;
+      // Langs dezelfde wand: eerst verticaal of eerst horizontaal; zit er een deur of raam tussen, dan via het plafond.
+      if (a.face && a.face === b.face) {
+        const viaA = [P(a, a.face), P({ x: a.x, y: b.y, z: a.z }, a.face), P(b, b.face)];
+        const viaB = [P(a, a.face), P({ x: b.x, y: a.y, z: b.z }, a.face), P(b, b.face)];
+        if (clear(viaA)) return viaA;
+        if (clear(viaB)) return viaB;
+      }
+      if (a.mount === 'buiten' && b.mount === 'buiten') return [P(a)].concat(outside(a, b).map(c => P({ x: c.x, y: a.y, z: c.z })), [P(b)]);
+      // Wandpunt: de plafondhoogte iets de ruimte in meten (de wand zelf hoort bij geen ruimte).
+      const top = (p) => p.mount === 'plafond' ? p.y : p.face && p.face.n ? ceilAt(p.x + p.face.n.x * 50, p.z + p.face.n.z * 50) : ceilAt(p.x, p.z);
+      const A2 = a.mount === 'plafond' ? null : sidestep(a, top), B2 = b.mount === 'plafond' ? null : sidestep(b, top);
+      const a2 = A2 || a, b2 = B2 || b;
+      const ya = top(a2), yb = top(b2), dropB = Math.abs(yb - b.y) > 1;
       const pts = [P(a, a.face, a.mount === 'plafond')];
-      if (Math.abs(ya - a.y) > 1) pts.push(P({ x: a.x, y: ya, z: a.z }, a.face, true));
-      pts.push(P({ x: b.x, y: ceilAt(b.x, a.z), z: a.z }, null, true));
-      pts.push(P({ x: b.x, y: yb, z: b.z }, dropB ? b.face : null, true));
-      if (dropB) pts.push(P(b, b.face, false));
-      return pts;
+      if (A2) pts.push(P(A2, a.face));
+      if (Math.abs(ya - a.y) > 1) pts.push(P({ x: a2.x, y: ya, z: a2.z }, a.face, true));
+      corners(a2, b2, true).forEach(c => pts.push(P({ x: c.x, y: ceilAt(c.x, c.z), z: c.z }, null, true)));
+      pts.push(P({ x: b2.x, y: yb, z: b2.z }, dropB ? b.face : null, true));
+      if (dropB) {
+        if (B2) pts.push(P(B2, b.face));
+        pts.push(P(b, b.face, false));
+      }
+      return followCeiling(pts);
     }
     const length = (pts) => pts.slice(1).reduce((s, q, i) => s + Math.hypot(q.x - pts[i].x, q.y - pts[i].y, q.z - pts[i].z), 0);
     const cost = (a, b) => Math.abs(a.x - b.x) + Math.abs(a.z - b.z) + Math.abs(a.y - b.y);
@@ -194,7 +395,8 @@ window.ElektraModel = (() => {
       groups: [], runs: [], cables: [], wires: [], conduits: [], materials: [], warnings: [], items: [], faces: []
     };
     if (!s.enabled || !units.length) return out;
-    const R = makeRouter(units);
+    const blocked = makeOpeningTest(units, interior);
+    const R = makeRouter(units, rooms, blocked);
     const faces = {};
     units.forEach(u => { faces[u.id] = facesOf(u, interior); });
     const faceOfPiece = (u, p) => faces[u.id].find(f => f.piece === p && f.side === -1);
@@ -515,7 +717,7 @@ window.ElektraModel = (() => {
     });
     if (mkLow) out.apps.forEach(a => addRun(APPLIANCES[a.app].cable, mkLow, Object.assign({}, a.pos, { mount: 'wand', face: a.face, name: a.code }), a.group));
 
-    separateRuns(out.runs);
+    separateRuns(out.runs, blocked);
     const holesOf = makeHoleCounter(units, R);
     out.runs.forEach(r => {
       r.rawMM = R.length(r.path);
@@ -561,6 +763,7 @@ window.ElektraModel = (() => {
     out.combos.forEach(c => { frames[c.switches.length] = (frames[c.switches.length] || 0) + 1; });
     const m = out.materials;
     const add = (naam, aantal, eenheid) => { if (aantal > 0) m.push({ naam, aantal, eenheid: eenheid || 'st.' }); };
+    const kleur = ', ' + PLATE_COLORS[s.plateColor].label.toLowerCase();
     if (out.meterkast) {
       add('Groepenkast 3-fase (aansluiting 3×25 A)', 1);
       add('Hoofdschakelaar 4-polig 40 A', 1);
@@ -571,13 +774,13 @@ window.ElektraModel = (() => {
     add('Installatieautomaat B16 1P+N (wcd)', nWcdG);
     add('Installatieautomaat B16 1P+N (apparaten)', out.apps.filter(a => (APPLIANCES[a.app].poles || 1) === 1).length);
     add('Installatieautomaat 2× B16, 2-fase (kookgroep)', out.apps.filter(a => APPLIANCES[a.app].poles === 2).length);
-    add('Schakelaar enkelpolig (inbouw)', out.switches.length);
-    Object.keys(frames).forEach(n => add(`Afdekraam ${n}-voudig`, frames[n]));
-    add('Wandcontactdoos dubbel met randaarde', out.wcds.length);
-    add('Vloerdoos met dubbele wcd (randaarde)', out.floorWcds.length);
+    add('Schakelaar enkelpolig (inbouw)' + kleur, out.switches.length);
+    Object.keys(frames).forEach(n => add(`Afdekraam ${n}-voudig` + kleur, frames[n]));
+    add('Wandcontactdoos dubbel met randaarde' + kleur, out.wcds.length);
+    add('Vloerdoos met dubbele wcd (randaarde)' + kleur, out.floorWcds.length);
     const appMat = {};
     out.apps.forEach(a => { const n = APPLIANCES[a.app].material; appMat[n] = (appMat[n] || 0) + 1; });
-    Object.keys(appMat).forEach(n => add(n, appMat[n]));
+    Object.keys(appMat).forEach(n => add(n + kleur, appMat[n]));
     add('Luchtdichte hollewanddoos (schakelaar/wcd/apparaat)', out.switches.length + 2 * out.wcds.length + out.apps.length);
     add('Luchtdichte verdeeldoos (plafond)', out.boxes.length);
     add('Lasklem 3-voudig (schatting)', out.boxes.length * 3 + out.switches.length + out.wcds.length);
@@ -603,7 +806,7 @@ window.ElektraModel = (() => {
   }
 
   // Uitzondering: het laatste stuk naar de meterkast; daar komen de buizen tegen elkaar aan de kast binnen.
-  function separateRuns(runs) {
+  function separateRuns(runs, blocked) {
     const add = (p, d, k) => Object.assign({}, p, { x: p.x + d.x * k, y: p.y + d.y * k, z: p.z + d.z * k });
     const axisOf = (p, q) => {
       const dx = Math.abs(q.x - p.x), dy = Math.abs(q.y - p.y), dz = Math.abs(q.z - p.z);
@@ -674,6 +877,7 @@ window.ElektraModel = (() => {
             const kk = sign * k * step, p2 = add(p, dir, kk), q2 = add(q, dir, kk), s2 = seg(r, p2, q2, rad);
             const j1 = seg(r, p, p2, rad), j2 = seg(r, q2, q, rad);
             if (conflict(s2) || (!freeStart && conflict(j1)) || (!freeEnd && conflict(j2))) continue;
+            if (blocked && (blocked(p2, q2) || blocked(p, p2) || blocked(q2, q))) continue;
             pts = pts.slice(0, i + 1).concat([p2, q2], pts.slice(i + 1));
             placed.push(s2, j1, j2);
             i += 2;
@@ -727,12 +931,13 @@ window.ElektraModel = (() => {
       conduit
     };
   }
-  function build3D(el, materials, stage) {
+  // rough: buizen en inbouwdozen (in de wand en boven het plafond); uit bij de render-export.
+  function build3D(el, materials, layers, rough) {
     const toM = 0.001, group = new THREE.Group();
     if (!el || !el.enabled) return group;
     const mats = materials || createMaterials();
-    const st = BuildStages.clamp(stage), show = (key) => BuildStages.shows(st, key);
-    const rough = show('elektra') && !show('beplating');
+    mats.plateMaterial.color.setHex(PLATE_COLORS[el.settings.plateColor].hex);
+    if (!ViewLayers.shows(layers, 'elektra')) return group;
     const box = (w, h, d, c, rotY, mat) => {
       const mesh = new THREE.Mesh(new THREE.BoxGeometry(w * toM, h * toM, d * toM), mat);
       mesh.position.set(c.x * toM, c.y * toM, c.z * toM);
@@ -741,24 +946,24 @@ window.ElektraModel = (() => {
       return mesh;
     };
     const k = el.meterkast;
-    if (k && show('elektra')) {
+    if (k) {
       box(k.w, k.h, k.d, k.center, k.rotY, mats.kastMaterial);
       const front = facePoint(k.face, k.u, k.y + k.h / 2, k.d + 2);
       box(k.w - 30, k.h - 30, 4, front, k.rotY, mats.deurMaterial);
     }
-    if (show('afwerking')) {
+    if (ViewLayers.shows(layers, 'afwerking')) {
       el.combos.forEach(c => box(c.width, PLATE, 10, c.center, c.rotY, mats.plateMaterial));
       el.wcds.forEach(w => box(WCD_W, PLATE, 12, w.center, w.rotY, mats.plateMaterial));
       el.apps.forEach(a => box(PLATE, PLATE, 12, a.center, a.rotY, mats.plateMaterial));
       el.floorWcds.forEach(w => box(130, 8, 130, { x: w.x, y: w.y + 4, z: w.z }, 0, mats.plateMaterial));
     }
-    if (!rough) return group;
+    if (rough === false) return group;
 
     const up = new THREE.Vector3(0, 1, 0);
     const shift = (p) => ({
       x: p.x - (p.wall ? p.wall.n.x * WALL_IN : 0), y: p.y + (p.ceil ? CEIL_UP : 0), z: p.z - (p.wall ? p.wall.n.z * WALL_IN : 0)
     });
-    el.runs.forEach(r => {
+    el.runs.forEach((r, ri) => {
       const c = cableInfo(r.type);
       if (!c.conduit) return;
       const rad = c.conduit / 2 * toM;
@@ -770,11 +975,13 @@ window.ElektraModel = (() => {
         const m = new THREE.Mesh(new THREE.CylinderGeometry(rad, rad, len * toM, 6), mat);
         m.position.set((p.x + q.x) / 2 * toM, (p.y + q.y) / 2 * toM, (p.z + q.z) / 2 * toM);
         m.quaternion.setFromUnitVectors(up, new THREE.Vector3(dx / len, dy / len, dz / len));
+        m.userData.run = ri;
         group.add(m);
       });
       pts.slice(1, -1).forEach(p => {
         const j = new THREE.Mesh(new THREE.IcosahedronGeometry(rad * 1.15, 0), mat);
         j.position.set(p.x * toM, p.y * toM, p.z * toM);
+        j.userData.run = ri;
         group.add(j);
       });
     });
@@ -848,7 +1055,7 @@ window.ElektraModel = (() => {
           } else {
             n += bom.filter(bp => VERTICAL_KINDS.includes(bp.kind) && between(bp.x + f.W / 2, a.u, b.u) && Math.abs(a.y - bp.y) <= bp.length / 2).length;
           }
-        } else if (!vertical && p.ceil && q.ceil) {
+        } else if (!vertical && p.ceil && q.ceil && !(p.plenum && q.plenum)) {
           const mid = { x: (p.x + q.x) / 2, z: (p.z + q.z) / 2 }, u = R.unitAt(mid.x, mid.z);
           if (u) u.roof.planes.forEach(pl => {
             const dm = roofDeckMap(u, pl), c = clipPlan(p, q, dm.bounds);
@@ -864,5 +1071,5 @@ window.ElektraModel = (() => {
     };
   }
 
-  return { DEFAULT_SETTINGS, CABLES, CORE_COLORS, APPLIANCES, PLATE, WCD_W, cableInfo, normalizeSettings, compute, snapToWall, wallCoords, clipPlan, roofDeckMap, createMaterials, build3D };
+  return { DEFAULT_SETTINGS, PLATE_COLORS, CABLES, CORE_COLORS, APPLIANCES, PLATE, WCD_W, cableInfo, normalizeSettings, compute, snapToWall, wallCoords, clipPlan, roofDeckMap, createMaterials, build3D };
 })();

js/floor/floor-model.js

@@ -102,6 +102,101 @@ window.FloorModel = (() => {
     return { joists, width, depth, joistW, joistH, underlayThick, rims: r, joistLen };
   }
 
+  // Rechthoekige sparingen (schoorsteen door het dak): x t.o.v. het midden (-width/2..width/2), y 0..depth.
+  // Raveelwerk zodat de plaat overal op hout eindigt: raveelstijlen over de volle lengte langs de zijkanten (tenzij de
+  // sparing tot de rand loopt), raveelbalken dwars ervoor en erna tussen die stijlen, kreupele balken daartussen tot
+  // de raveelbalk. Een gewone balk die een raveelstijl zou raken vervalt; de randbalk is onderbroken.
+  function normalizeCuts(cuts, width, depth) {
+    return (cuts || []).map(c => ({
+      x0: Math.max(-width / 2, Math.min(c.x0, c.x1)), x1: Math.min(width / 2, Math.max(c.x0, c.x1)),
+      y0: Math.max(0, Math.min(c.y0, c.y1)), y1: Math.min(depth, Math.max(c.y0, c.y1))
+    })).filter(c => c.x1 - c.x0 > 1 && c.y1 - c.y0 > 1);
+  }
+  function joistLayout(calcData) {
+    const { joists, joistW, depth, width } = calcData, rims = calcData.rims || {}, cuts = calcData.cuts || [];
+    const half = width / 2, ya = rims.front ? joistW : 0, yb = depth - (rims.back ? joistW : 0);
+    const frames = cuts.map(c => ({
+      c,
+      sides: [c.x0 > -half + joistW ? c.x0 - joistW / 2 : null, c.x1 < half - joistW ? c.x1 + joistW / 2 : null].filter(x => x !== null),
+      head: c.y0 > ya + joistW, tail: c.y1 < yb - joistW
+    }));
+    const overlaps = (x, a, b) => x + joistW / 2 > a + 0.5 && x - joistW / 2 < b - 0.5;
+    const pieces = [];
+    joists.forEach(x => {
+      if (frames.some(f => f.sides.some(sx => overlaps(x, sx - joistW / 2, sx + joistW / 2)))) return;
+      let segs = [[ya, yb]];
+      frames.filter(f => overlaps(x, f.c.x0, f.c.x1)).forEach(f => {
+        const a0 = f.head ? f.c.y0 - joistW : f.c.y0, b0 = f.tail ? f.c.y1 + joistW : f.c.y1;
+        segs = segs.flatMap(([a, b]) => [[a, Math.min(b, a0)], [Math.max(a, b0), b]]).filter(([a, b]) => b - a > 1);
+      });
+      pieces.push({ x, segs });
+    });
+    const trimmers = [];
+    frames.forEach(f => {
+      f.sides.forEach(sx => { if (!pieces.some(p => overlaps(p.x, sx - joistW / 2, sx + joistW / 2))) pieces.push({ x: sx, segs: [[ya, yb]], frame: true }); });
+      const x0 = f.c.x0 > -half + joistW ? f.c.x0 : -half, x1 = f.c.x1 < half - joistW ? f.c.x1 : half;
+      if (f.head) trimmers.push({ x0, x1, y0: f.c.y0 - joistW, y1: f.c.y0 });
+      if (f.tail) trimmers.push({ x0, x1, y0: f.c.y1, y1: f.c.y1 + joistW });
+    });
+    pieces.sort((a, b) => a.x - b.x);
+    // Randbalken (dwars, voor en achter): onderbroken waar een sparing tot in de rand loopt.
+    const rimRuns = [['front', 0, joistW], ['back', depth - joistW, depth]].filter(([k]) => rims[k]).map(([k, y0, y1]) => {
+      let segs = [[-half, half]];
+      cuts.filter(c => c.y1 > y0 + 0.5 && c.y0 < y1 - 0.5).forEach(c => {
+        segs = segs.flatMap(([a, b]) => [[a, Math.min(b, c.x0)], [Math.max(a, c.x1), b]]).filter(([a, b]) => b - a > 1);
+      });
+      return { key: k, y0, y1, segs };
+    });
+    return { pieces, trimmers, rimRuns };
+  }
+  // Bovenvlak (plaat, afwerking) als vormen in x/(y - depth/2), met de doorvoeren als gaten.
+  function surfaceShapes(calcData, resolvedOpenings, k) {
+    const s = k || 1, W = calcData.width, D = calcData.depth, cuts = calcData.cuts || [];
+    const pts = (loop) => loop.map(p => new THREE.Vector2(p.x * s, (p.z - D / 2) * s));
+    let regions;
+    if (!cuts.length) regions = [{ outer: [{ x: -W / 2, z: 0 }, { x: W / 2, z: 0 }, { x: W / 2, z: D }, { x: -W / 2, z: D }], holes: [] }];
+    else {
+      const xs = [...new Set([-W / 2, W / 2, ...cuts.flatMap(c => [c.x0, c.x1])])].sort((a, b) => a - b);
+      const ys = [...new Set([0, D, ...cuts.flatMap(c => [c.y0, c.y1])])].sort((a, b) => a - b);
+      const cells = [];
+      for (let i = 0; i < xs.length - 1; i++) for (let j = 0; j < ys.length - 1; j++) {
+        const xm = (xs[i] + xs[i + 1]) / 2, ym = (ys[j] + ys[j + 1]) / 2;
+        if (!cuts.some(c => xm > c.x0 && xm < c.x1 && ym > c.y0 && ym < c.y1)) cells.push({ x0: xs[i], x1: xs[i + 1], z0: ys[j], z1: ys[j + 1] });
+      }
+      const loops = rectUnionLoops(cells);
+      const inside = (pt, poly) => {
+        let c = false;
+        for (let a = 0, b = poly.length - 1; a < poly.length; b = a++) {
+          if ((poly[a].z > pt.z) !== (poly[b].z > pt.z) && pt.x < (poly[b].x - poly[a].x) * (pt.z - poly[a].z) / (poly[b].z - poly[a].z) + poly[a].x) c = !c;
+        }
+        return c;
+      };
+      const sign = Math.sign(loops[0].area);
+      regions = loops.filter(l => Math.sign(l.area) === sign).map(l => ({ outer: l.pts, holes: [] }));
+      loops.filter(l => Math.sign(l.area) !== sign).forEach(l => {
+        const owner = regions.find(r => inside(l.pts[0], r.outer));
+        if (owner) owner.holes.push(l.pts);
+      });
+    }
+    return regions.map(rg => {
+      const shape = new THREE.Shape(pts(rg.outer));
+      rg.holes.forEach(h => shape.holes.push(new THREE.Path(pts(h))));
+      resolvedOpenings.filter(o => !o.removed && o.r > 0 && inside2(o, rg.outer)).forEach(o => {
+        const hole = new THREE.Path();
+        hole.absarc(o.x * s, (o.y - D / 2) * s, o.r * s, 0, Math.PI * 2, false);
+        shape.holes.push(hole);
+      });
+      return shape;
+    });
+    function inside2(o, poly) {
+      let c = false;
+      for (let a = 0, b = poly.length - 1; a < poly.length; b = a++) {
+        if ((poly[a].z > o.y) !== (poly[b].z > o.y) && o.x < (poly[b].x - poly[a].x) * (o.y - poly[a].z) / (poly[b].z - poly[a].z) + poly[a].x) c = !c;
+      }
+      return c;
+    }
+  }
+
   function topHeight(calcData) {
     return calcData.joistH + calcData.underlayThick;
   }
@@ -115,7 +210,12 @@ window.FloorModel = (() => {
     const rimCount = calcData.rims ? (calcData.rims.front ? 1 : 0) + (calcData.rims.back ? 1 : 0) : 0;
     const joistLenM = (calcData.joistLen || depth) * toM;
 
-    const joistWoodM3 = joists.length * joistWM * joistHM * joistLenM + rimCount * joistWM * joistHM * widthM;
+    const cuts = calcData.cuts || [];
+    const lay = cuts.length ? joistLayout(calcData) : null;
+    const joistMM = lay ? lay.pieces.reduce((t, p) => t + p.segs.reduce((u, [a, b]) => u + b - a, 0), 0) + lay.trimmers.reduce((t, tr) => t + tr.x1 - tr.x0, 0)
+      : joists.length * (calcData.joistLen || depth);
+    const rimMM = lay ? lay.rimRuns.reduce((t, r) => t + r.segs.reduce((u, [a, b]) => u + b - a, 0), 0) : rimCount * width;
+    const joistWoodM3 = joistMM * toM * joistWM * joistHM + rimMM * toM * joistWM * joistHM;
     const joistWoodKg = joistWoodM3 * DENSITY_WOOD_KGM3;
 
     const grossAreaM2 = widthM * depthM;
@@ -125,6 +225,7 @@ window.FloorModel = (() => {
       holesAreaM2 += Math.PI * rM * rM;
       holesVoidM3 += Math.PI * rM * rM * joistHM;
     });
+    cuts.forEach(c => { holesAreaM2 += (c.x1 - c.x0) * (c.y1 - c.y0) * toM * toM; });
     const osbAreaM2 = Math.max(0, grossAreaM2 - holesAreaM2);
     const osbVolM3 = osbAreaM2 * underlayM;
     const osbKg = osbVolM3 * DENSITY_OSB_KGM3;
@@ -154,6 +255,7 @@ window.FloorModel = (() => {
 
   function computeFromState(state, rims) {
     const calcData = computeFrame(state.floor, rims);
+    calcData.cuts = normalizeCuts(state.cuts, calcData.width, calcData.depth);
     const resolvedOpenings = resolveFloorOpenings(state.openings || [], calcData.width, calcData.depth, calcData.joists, calcData.joistW);
     const chassisData = computeChassisWheels(state.chassis, calcData.width, calcData.depth);
     return { calcData, resolvedOpenings, chassisData };
@@ -240,7 +342,22 @@ window.FloorModel = (() => {
     const rims = calcData.rims || {};
     const joistLenM = (calcData.joistLen || depth) * toM;
     const joistZ = ((rims.front ? joistW : 0) - (rims.back ? joistW : 0)) / 2 * toM;
-    joists.forEach((xMM, i) => {
+    if ((calcData.cuts || []).length) {
+      const lay = joistLayout(calcData);
+      const box = (x0, x1, y0, y1) => {
+        const mesh = new THREE.Mesh(new THREE.BoxGeometry((x1 - x0) * toM, joistHM, (y1 - y0) * toM), woodMaterial);
+        mesh.position.set((x0 + x1) / 2 * toM, joistHM / 2, ((y0 + y1) / 2 - depth / 2) * toM);
+        mesh.castShadow = true;
+        floorGroup3D.add(mesh);
+      };
+      const outer = [joists[0], joists[joists.length - 1]];
+      lay.pieces.forEach(p => {
+        // Plaat zichtbaar: alleen de buitenste balken en het raveelwerk (zoals zonder sparing).
+        if (opts.outerJoistsOnly && !outer.includes(p.x) && !p.frame && p.segs.length === 1 && p.segs[0][1] - p.segs[0][0] > depth - 3 * joistW) return;
+        p.segs.forEach(([a, b]) => box(p.x - joistW / 2, p.x + joistW / 2, a, b));
+      });
+      lay.trimmers.forEach(t => box(t.x0, t.x1, t.y0, t.y1));
+    } else joists.forEach((xMM, i) => {
       if (opts.outerJoistsOnly && i > 0 && i < joists.length - 1) return;
       const geo = new THREE.BoxGeometry(joistWM, joistHM, joistLenM);
       const mesh = new THREE.Mesh(geo, woodMaterial);
@@ -248,7 +365,14 @@ window.FloorModel = (() => {
       mesh.castShadow = true;
       floorGroup3D.add(mesh);
     });
-    [['front', -1], ['back', 1]].filter(([k]) => rims[k]).forEach(([, sign]) => {
+    if ((calcData.cuts || []).length) {
+      joistLayout(calcData).rimRuns.forEach(r => r.segs.forEach(([a, b]) => {
+        const mesh = new THREE.Mesh(new THREE.BoxGeometry((b - a) * toM, joistHM, joistWM), woodMaterial);
+        mesh.position.set((a + b) / 2 * toM, joistHM / 2, ((r.y0 + r.y1) / 2 - depth / 2) * toM);
+        mesh.castShadow = true;
+        floorGroup3D.add(mesh);
+      }));
+    } else [['front', -1], ['back', 1]].filter(([k]) => rims[k]).forEach(([, sign]) => {
       const mesh = new THREE.Mesh(new THREE.BoxGeometry(widthM, joistHM, joistWM), woodMaterial);
       mesh.position.set(0, joistHM / 2, sign * (depthM - joistWM) / 2);
       mesh.castShadow = true;
@@ -257,24 +381,7 @@ window.FloorModel = (() => {
 
     // Isolatie wordt niet getekend; de leegte-inhoud zit in computeSpecs.
 
-    const osbShape = new THREE.Shape();
-    osbShape.moveTo(-widthM / 2, -depthM / 2);
-    osbShape.lineTo(widthM / 2, -depthM / 2);
-    osbShape.lineTo(widthM / 2, depthM / 2);
-    osbShape.lineTo(-widthM / 2, depthM / 2);
-    osbShape.closePath();
-
-    resolvedOpenings.filter(o => !o.removed).forEach(o => {
-      const cx = o.x * toM;
-      const cz = o.y * toM - depthM / 2;
-      const rM = o.r * toM;
-      if (rM <= 0) return;
-      const hole = new THREE.Path();
-      hole.absarc(cx, cz, rM, 0, Math.PI * 2, false);
-      osbShape.holes.push(hole);
-    });
-
-    const osbGeo = new THREE.ExtrudeGeometry(osbShape, { steps: 1, depth: underlayM, bevelEnabled: false });
+    const osbGeo = new THREE.ExtrudeGeometry(surfaceShapes(calcData, resolvedOpenings, toM), { steps: 1, depth: underlayM, bevelEnabled: false });
     const osbMesh = new THREE.Mesh(osbGeo, osbMaterial);
     osbMesh.rotation.x = Math.PI / 2;
     osbMesh.position.set(0, joistHM + underlayM, 0);
@@ -304,18 +411,7 @@ window.FloorModel = (() => {
 
     const fin = opts.finish && finishMaterial(opts.finish.key);
     if (fin) {
-      const shape = new THREE.Shape();
-      shape.moveTo(-widthM / 2, -depthM / 2);
-      shape.lineTo(widthM / 2, -depthM / 2);
-      shape.lineTo(widthM / 2, depthM / 2);
-      shape.lineTo(-widthM / 2, depthM / 2);
-      shape.closePath();
-      resolvedOpenings.filter(o => !o.removed && o.r > 0).forEach(o => {
-        const hole = new THREE.Path();
-        hole.absarc(o.x * toM, o.y * toM - depthM / 2, o.r * toM, 0, Math.PI * 2, false);
-        shape.holes.push(hole);
-      });
-      const geo = new THREE.ShapeGeometry(shape);
+      const geo = new THREE.ShapeGeometry(surfaceShapes(calcData, resolvedOpenings, toM));
       const ox = opts.finish.originX || 0, oz = opts.finish.originZ || 0;
       const pos = geo.attributes.position, uv = geo.attributes.uv;
       // Na het kantelen (-90° om X) wordt vorm-y wereld -z.
@@ -353,6 +449,6 @@ window.FloorModel = (() => {
 
   return {
     FINISHES, finishMaterial, finishThumbUrl, tileTexture, validateState, computeFrame, topHeight, resolveOpenings: resolveFloorOpenings, computeChassisWheels,
-    computeSpecs, computeFromState, createMaterials, build3D
+    computeSpecs, computeFromState, createMaterials, build3D, surfaceShapes, joistLayout
   };
 })();

js/floor/floor.js

@@ -6,7 +6,10 @@
  */
 
 const FLOOR_TEMPLATE = `
-<div id="floor-app">
+<div id="floor-app" class="ed-app">
+ <div class="ed-main">
+  <div class="ed-toolbar" id="floor-toolbar"></div>
+  <div class="ed-views">
   <div id="floor-left-column">
     <div id="floor-pane-2d-container">
       <div class="pane-2d-sub" id="floor-pane-top">
@@ -18,7 +21,15 @@ const FLOOR_TEMPLATE = `
         <canvas id="floor-canvas-section"></canvas>
       </div>
     </div>
-    <div id="floor-control-panel">
+  </div>
+  <div id="floor-right-column">
+    <div id="floor-pane-3d">
+      <div class="pane-label">3D</div>
+    </div>
+  </div>
+  </div>
+ </div>
+    <div id="floor-control-panel" class="ed-panel">
       <div class="io-toolbar">
         <input type="file" id="f-file-import-json" accept="application/json" style="display:none;">
         <span id="f-io-status" class="io-status"></span>
@@ -27,6 +38,7 @@ const FLOOR_TEMPLATE = `
         <button class="tab-btn active" data-tab="floor-tab-main"><i class="bi bi-rulers"></i> Opbouw</button>
         <button class="tab-btn" data-tab="floor-tab-openings"><i class="bi bi-bullseye"></i> Doorvoeren</button>
         <button class="tab-btn" data-tab="floor-tab-chassis"><i class="bi bi-truck"></i> Chassis</button>
+        <button class="tab-btn" data-tab="floor-tab-specs"><i class="bi bi-clipboard-data"></i> Resultaat</button>
       </div>
 
       <div id="floor-tab-main" class="tab-content active">
@@ -57,20 +69,6 @@ const FLOOR_TEMPLATE = `
             <div class="control-group"><label>Afstand max.</label>
               <div><input type="number" id="f-inp-max-sp" value="600" step="10"><span class="unit">mm</span></div></div>
 
-            <div class="divider"></div>
-            <div class="result-row"><span>Vloerbalken</span><span data-spec="joist-count" class="highlight">-</span></div>
-            <div class="result-row"><span>Vloeroppervlak</span><span data-spec="floor-area" class="highlight">-</span></div>
-            <div class="result-row"><span>Volume balkhout</span><span data-spec="joist-m3" class="highlight">-</span></div>
-            <div class="result-row"><span>Gewicht balkhout</span><span data-spec="joist-kg" class="highlight">-</span></div>
-
-            <div class="divider"></div>
-            <div class="result-row"><span>OSB oppervlak</span><span data-spec="osb-m2" class="highlight">-</span></div>
-            <div class="result-row"><span>OSB volume</span><span data-spec="osb-m3" class="highlight">-</span></div>
-            <div class="result-row"><span>OSB gewicht</span><span data-spec="osb-kg" class="highlight">-</span></div>
-
-            <div class="divider"></div>
-            <div class="result-row"><span>Isolatie</span><span data-spec="void-m3" class="highlight">-</span></div>
-            <div class="result-row"><span>Totaal gewicht</span><span data-spec="total-kg" class="highlight">-</span></div>
           </div>
         </div>
       </div>
@@ -82,9 +80,8 @@ const FLOOR_TEMPLATE = `
       </div>
 
       <div id="floor-tab-chassis" class="tab-content">
-        <div class="material-toggle-group">
-          <button type="button" id="f-btn-chassis-toggle" class="material-toggle-btn">Chassis-laag: Uit</button>
-        </div>
+        <div class="control-group"><label for="f-chassis-on">Chassis-laag</label>
+          <div><label class="ui-switch"><input type="checkbox" id="f-chassis-on"><span></span></label></div></div>
         <div class="controls-grid">
           <div>
             <div class="control-group"><label>Wieldiameter</label>
@@ -99,17 +96,9 @@ const FLOOR_TEMPLATE = `
         </div>
         <div id="f-chassis-warning" class="global-warning" style="display:none;"></div>
       </div>
-    </div>
-  </div>
-
-  <div id="floor-right-column">
-    <div id="floor-pane-3d">
-      <div class="pane-label">3D</div>
-      <div class="toolbar-3d" id="floor-toolbar-3d"></div>
-    </div>
-
+      <div id="floor-tab-specs" class="tab-content">
     <div id="floor-specs-panel-3d">
-      <div class="controls-grid">
+      <div>
         <div>
           <div class="spec-section">
             <h1><i class="bi bi-columns-gap"></i> Balken</h1>
@@ -139,6 +128,7 @@ const FLOOR_TEMPLATE = `
     </div>
   </div>
 </div>
+</div>
 
 <div id="wall-project-overlay">
   <div id="wall-project-modal">
@@ -169,8 +159,8 @@ const FLOOR_TEMPLATE = `
       </div>
     </div>
     <div class="modal-footer">
-      <button type="button" id="wall-project-cancel" class="io-btn">Annuleren</button>
-      <button type="button" id="wall-project-save" class="material-toggle-btn active" style="flex:none; padding:6px 18px;">Opslaan</button>
+      <button type="button" id="wall-project-cancel" class="ui-btn" data-esc>Annuleren</button>
+      <button type="button" id="wall-project-save" class="ui-btn ui-btn-primary">Opslaan</button>
     </div>
   </div>
 </div>
@@ -285,16 +275,14 @@ function mountFloorEditor(container, callbacks) {
   document.querySelectorAll('#floor-tab-main input').forEach(inp => inp.addEventListener('input', updateAll));
 
   function syncChassisToggleLabel() {
-    const btn = document.getElementById('f-btn-chassis-toggle');
-    btn.classList.toggle('active', chassis.enabled);
-    btn.textContent = 'Chassis-laag: ' + (chassis.enabled ? 'Aan' : 'Uit');
+    document.getElementById('f-chassis-on').checked = chassis.enabled;
   }
-  document.getElementById('f-btn-chassis-toggle').addEventListener('click', () => {
-    chassis.enabled = !chassis.enabled;
+  document.getElementById('f-chassis-on').addEventListener('change', (e) => {
+    chassis.enabled = e.target.checked;
     syncChassisToggleLabel();
     updateAll();
   });
-  document.querySelectorAll('#floor-tab-chassis input').forEach(inp => inp.addEventListener('input', () => {
+  document.querySelectorAll('#floor-tab-chassis input[type=number]').forEach(inp => inp.addEventListener('input', () => {
     chassis.wheelDiameter = parseFloat(document.getElementById('f-inp-wheel-d').value) || 400;
     chassis.trackWidth = parseFloat(document.getElementById('f-inp-track').value) || 1200;
     chassis.wheelbase = parseFloat(document.getElementById('f-inp-wheelbase').value) || 1200;
@@ -632,19 +620,21 @@ function mountFloorEditor(container, callbacks) {
   let lastResolvedOpenings = [];
   let lastChassisData = { wheels: [], outOfBounds: false };
 
-  createViewFilter(document.getElementById('floor-toolbar-3d'), [
-    { key: 'beplating', label: roofMode ? 'Beplating (plafond + dakleer)' : 'Beplating (OSB-plaat)' }
-  ], (v) => {
-    osbVisible = v.beplating;
-    update3DScene();
-  });
   let skyMode = Skybox.getMode();
   const skyEnv = Skybox.createEnvironment(scene);
   const applySky = () => {
     skyEnv.fitTo(floorGroup3D, 0);
     Skybox.apply(skyMode, { env: skyEnv, grid, controls, sun: dirLight, ambient: floorAmbient, base: { ambient: 0.6, sun: 0.8 }, shadowRoot: floorGroup3D });
   };
-  Skybox.createToggle(document.getElementById('floor-toolbar-3d'), (m) => { skyMode = m; applySky(); });
+  const bar = UI.editorBar(document.getElementById('floor-toolbar'), document.getElementById('floor-app'), {
+    onResize: () => onWindowResize(),
+    layers: {
+      layers: {}, keys: [],
+      extras: [{ key: 'beplating', label: roofMode ? 'Beplating (plafond + dakleer)' : 'Beplating (OSB-plaat)' }],
+      onExtra: (v) => { osbVisible = v.beplating; update3DScene(); }
+    },
+    onSky: (m) => { skyMode = m; applySky(); }
+  });
 
   function update3DScene() {
     if (floorGroup3D) scene.remove(floorGroup3D);
@@ -691,14 +681,6 @@ function mountFloorEditor(container, callbacks) {
   }
   window.addEventListener('resize', onWindowResize);
 
-  function toggleFullscreen3D() {
-    UI.cycle3D(document.getElementById('floor-app'));
-    requestAnimationFrame(onWindowResize);
-  }
-  function toggleFullscreen2D() {
-    UI.toggle2D(document.getElementById('floor-app'));
-    requestAnimationFrame(onWindowResize);
-  }
 
   function getPureState() {
     return {
@@ -748,8 +730,8 @@ function mountFloorEditor(container, callbacks) {
     },
     exportDesign,
     triggerImport,
-    toggleFullscreen3D,
-    toggleFullscreen2D,
+    setView: bar.setView,
+    viewState: bar.viewState,
     openProjectProperties,
     getStateJson: getPureState,
     loadStateJson: applyPureState

js/house/chimney-model.js

@@ -0,0 +1,322 @@
+/*!
+ * Tectum
+ * Copyright © 2026 Machiel Heinen.
+ * Alle rechten voorbehouden. Gebruik uitsluitend met schriftelijke toestemming.
+ * Zie LICENTIE.md.
+ */
+// Schoorsteen tegen een buitenwand: hol, binnen vlak met de wand, buiten (iets) voor de gevel. Hij maakt in elke
+// buitenwand in hetzelfde vlak die hij raakt een sparing zoals een raam (ook over een naad tussen units heen) en
+// onderbreekt de dakrand; aan de voorkant steekt hij minstens tot voorbij de dakoverstek uit.
+// Lokaal assenstelsel per schoorsteen: t langs de wand (wereld-x of -z), s loodrecht erop, 0 = buitenkant regelwerk
+// van de unit (rand van de vloer), positief naar buiten.
+
+window.ChimneyModel = (() => {
+  const EPS = 0.5;
+  const SHELL_MM = 100;            // wand rond het rookkanaal
+  const CAP_MM = 60, CAP_OVER_MM = 30;
+  const FLUE_SHOW_MM = 500;        // zichtbare diepte van het rookkanaal onder de kap
+  const INSET_MM = 2;              // sparingen in wand, dak en dakrand net binnen de schoorsteen (geen z-fighting)
+  const BEAR_MM = -4;              // nokbalk stopt net vóór de binnenkant van de schoorsteen
+  const MIN_CUT_MM = 100;
+  const CORNER_CLEAR_MM = 200;     // slepen: zoveel vrij van een buitenhoek (gevelbekleding van de haakse wand)
+  const INSIDE_TYPES = { wand: 'Zoals de wanden', stuc: 'Stucwerk', steen: 'Steenstrip' };
+  const OUTSIDE_TYPES = { steen: 'Steenstrip', stuc: 'Stucwerk' };
+  const DEFAULTS = { w: 800, out: 180, above: 600, inside: { type: 'wand', stone: 'R777', stuc: 'wit' }, outside: { type: 'steen', stone: 'R777', stuc: 'wit' } };
+  const SIDES = {
+    voor: { axis: 'x', n: { x: 0, z: -1 } }, achter: { axis: 'x', n: { x: 0, z: 1 } },
+    links: { axis: 'z', n: { x: -1, z: 0 } }, rechts: { axis: 'z', n: { x: 1, z: 0 } }
+  };
+
+  const skinOf = (finish) => finish.type === 'steen' ? WallModel.STONE.STRIP_MM : finish.type === 'stuc' ? WallModel.STUC.THICK_MM : 0;
+
+  function normalizeFinish(f, types, def) {
+    const o = Object.assign({}, def, f || {});
+    if (!types[o.type]) o.type = def.type;
+    if (!WallModel.isStoneFinish(o.stone)) o.stone = def.stone;
+    if (!WallModel.isStucColor(o.stuc)) o.stuc = def.stuc;
+    return { type: o.type, stone: o.stone, stuc: o.stuc };
+  }
+
+  function normalize(list, unitIds) {
+    const used = new Set();
+    const num = (v, def, min, max) => (isFinite(v) ? Math.min(max, Math.max(min, Math.round(v))) : def);
+    return (Array.isArray(list) ? list : []).filter(c => c && unitIds.includes(c.unitId) && SIDES[c.side]).map(c => {
+      let id = Number(c.id) > 0 ? Math.round(c.id) : 1;
+      while (used.has(id)) id++;
+      used.add(id);
+      return {
+        id, unitId: c.unitId, side: c.side, u: num(c.u, 0, -20000, 40000),
+        w: num(c.w, DEFAULTS.w, 400, 2000), out: num(c.out, DEFAULTS.out, 0, 1000), above: num(c.above, DEFAULTS.above, 0, 3000),
+        inside: normalizeFinish(c.inside, INSIDE_TYPES, DEFAULTS.inside),
+        outside: normalizeFinish(c.outside, OUTSIDE_TYPES, DEFAULTS.outside)
+      };
+    });
+  }
+
+  function create(list, unitId, side, u) {
+    const id = (list || []).reduce((m, c) => Math.max(m, c.id || 0), 0) + 1;
+    return normalize([{ id, unitId, side, u }], [unitId])[0];
+  }
+
+  // Vlak van een zijde van een unit; u = hart vanaf de linker vloerhoek, van buitenaf gezien.
+  const planeOf = (r, side) => ({ voor: r.z0, achter: r.z1, links: r.x0, rechts: r.x1 })[side];
+  // opts: { wallThickness(unitId, side), faceDepth(unitId, side) (gevelbekleding), overhang } voor de voetafdruk
+  // (sIn..sFront), die het dak al nodig heeft voordat de gevels gebouwd zijn.
+  function place(list, rects, opts) {
+    const o = opts || {};
+    return list.map(c => {
+      const r = rects.find(q => q.id === c.unitId);
+      if (!r || r.error) return null;
+      const S = SIDES[c.side];
+      const t = { voor: r.x1 - c.u, achter: r.x0 + c.u, links: r.z0 + c.u, rechts: r.z1 - c.u }[c.side];
+      const T = o.wallThickness ? o.wallThickness(c.unitId, c.side) : 260, face = o.faceDepth ? o.faceDepth(c.unitId, c.side) : 0;
+      return Object.assign({}, c, {
+        axis: S.axis, n: S.n, plane: planeOf(r, c.side), t0: t - c.w / 2, t1: t + c.w / 2,
+        sIn: -T, sFront: Math.max(face + c.out, (o.overhang || 0) + 20)
+      });
+    }).filter(Boolean);
+  }
+
+  // Sparingen in het dak van een unit (plattegrondmaten t.o.v. het unitmidden, zoals RoofModel.computeUnitRoof):
+  // de hele voetafdruk binnen het dak; een nokbalk stopt ervoor (BEAR_MM).
+  function roofCuts(placed, rect, roofRect) {
+    const out = [];
+    placed.forEach(c => {
+      const S = SIDES[c.side];
+      const k = S.axis === 'z' ? S.n.x : S.n.z, sA = c.plane + k * (c.sIn + INSET_MM), sB = c.plane + k * c.sFront;
+      const w = S.axis === 'z'
+        ? { x0: Math.min(sA, sB), x1: Math.max(sA, sB), z0: c.t0 + INSET_MM, z1: c.t1 - INSET_MM }
+        : { x0: c.t0 + INSET_MM, x1: c.t1 - INSET_MM, z0: Math.min(sA, sB), z1: Math.max(sA, sB) };
+      const x0 = Math.max(w.x0, roofRect.x0), x1 = Math.min(w.x1, roofRect.x1), z0 = Math.max(w.z0, roofRect.z0), z1 = Math.min(w.z1, roofRect.z1);
+      if (x1 - x0 < 1 || z1 - z0 < 1) return;
+      out.push({ x0: x0 - rect.cx, x1: x1 - rect.cx, z0: z0 - rect.cz, z1: z1 - rect.cz, bear: BEAR_MM, chimney: c.id });
+    });
+    return out;
+  }
+
+  // Ruwe sparingen voor één unitwand (wl uit UnitModel.computeLayout; rect en rects in wereld-mm).
+  // Loopt de schoorsteen over het wandeinde heen en gaat de wand daar over in die van een andere unit in hetzelfde
+  // vlak (naad), dan loopt de sparing tot het einde door: geen hoekstijlen in de schoorsteen.
+  function wallCuts(placed, rect, wl, studWidth, rects) {
+    const S = SIDES[wl.side], sw = studWidth, plane = planeOf(rect, wl.side);
+    const dir = UnitModel.WALL_SIDES.find(x => x.key === wl.side).dir;
+    const mid = S.axis === 'x' ? wl.cx : wl.cz, c = S.axis === 'x' ? rect.cx : rect.cz;
+    const s0 = mid - wl.width / 2, s1 = mid + wl.width / 2;
+    const toU = (t) => { const p = t - c; return dir > 0 ? p - s0 : s1 - p; };
+    const toT = (u) => c + (dir > 0 ? u + s0 : s1 - u);
+    const range = (r) => S.axis === 'x' ? [r.x0, r.x1] : [r.z0, r.z1];
+    const seamEnd = (u) => {
+      const t = toT(u);
+      return (rects || []).some(r => r !== rect && r.id !== rect.id && !r.error && Math.abs(planeOf(r, wl.side) - plane) < EPS &&
+        range(r)[0] <= t + EPS && range(r)[1] >= t - EPS);
+    };
+    const edge = sw * WallModel.CORNER_STUDS;
+    const out = [];
+    placed.filter(ch => ch.side === wl.side && Math.abs(ch.plane - plane) < EPS).forEach(ch => {
+      const ua = toU(ch.t0 + INSET_MM), ub = toU(ch.t1 - INSET_MM);
+      const atStart = Math.min(ua, ub) < edge && Math.max(toU(ch.t0), toU(ch.t1)) > 0 && seamEnd(0);
+      const atEnd = Math.max(ua, ub) > wl.width - edge && Math.min(toU(ch.t0), toU(ch.t1)) < wl.width && seamEnd(wl.width);
+      const a = atStart ? 0 : Math.max(edge, Math.min(ua, ub)), b = atEnd ? wl.width : Math.min(wl.width - edge, Math.max(ua, ub));
+      if (b - a < MIN_CUT_MM) return;
+      out.push({ id: 1000 + ch.id, type: 'schoorsteen', w: Math.round(b - a), h: 99999, y: 0, anchor: 'left', offset: Math.round(a), fill: null,
+        chimney: { id: ch.id, inside: ch.inside.type, atStart, atEnd } });
+    });
+    return out;
+  }
+
+  // units: parts.units (met walls/pieces en roof), roofEdge: RoofModel.computeEdge (krijgt gaps), groundY absoluut.
+  function resolve(placed, units, roofEdge, groundY, overhang) {
+    return placed.map(ch => {
+      const S = SIDES[ch.side];
+      const toW = (t, s) => S.axis === 'z' ? { x: ch.plane + S.n.x * s, z: t } : { x: t, z: ch.plane + S.n.z * s };
+      const sOf = (p) => S.axis === 'z' ? (p.x - ch.plane) * S.n.x : (p.z - ch.plane) * S.n.z;
+      const tOf = (p) => S.axis === 'z' ? p.z : p.x;
+      let T = 0, face = 0, floorTop = null;
+      units.forEach(u => u.walls.forEach(w => w.pieces.forEach(p => {
+        if (p.baseY || !p.place.normal || p.place.normal.x !== S.n.x || p.place.normal.y !== S.n.z) return;
+        const m = UnitModel.localToWorld(p.place, 0, p.place.thickness / 2);
+        if (Math.abs(sOf(m)) > 2) return;
+        const a = UnitModel.localToWorld(p.place, -p.place.width / 2, 0), b = UnitModel.localToWorld(p.place, p.place.width / 2, 0);
+        if (Math.min(ch.t1, Math.max(tOf(a), tOf(b))) - Math.max(ch.t0, Math.min(tOf(a), tOf(b))) < EPS) return;
+        T = Math.max(T, p.place.thickness);
+        face = Math.max(face, WallModel.claddingOffset(p.buitenMateriaal, p.stone, p.stuc));
+        if (floorTop === null) floorTop = p.place.floorTop;
+      })));
+      if (floorTop === null) {
+        const u0 = units.find(u => u.id === ch.unitId);
+        floorTop = u0 ? u0.layout.floorTop : 0;
+        T = T || (u0 && u0.walls.find(w => w.side === ch.side) || { thickness: 260 }).thickness;
+      }
+      // De dakrand onderbreken en de voorkant tot voorbij de overstek.
+      let roofOut = 0;
+      if (roofEdge) roofEdge.segments.forEach(sg => {
+        if (Math.abs(sg.normal.x - S.n.x) > 0.01 || Math.abs(sg.normal.z - S.n.z) > 0.01) return;
+        if (Math.abs(sOf(sg.a)) > Math.max(overhang, 50) + face + 5) return;
+        const ta = tOf(sg.outerA), tb = tOf(sg.outerB);
+        if (Math.min(ch.t1, Math.max(ta, tb)) - Math.max(ch.t0, Math.min(ta, tb)) < EPS) return;
+        sg.gaps = (sg.gaps || []).concat([[ch.t0 + INSET_MM, ch.t1 - INSET_MM]]);
+        roofOut = Math.max(roofOut, sOf(sg.outerA) + 20);
+      });
+      const sIn = -T, sFace = face, sFront = Math.max(face + ch.out, roofOut);
+
+      const roofs = units.map(u => u.roof);
+      const roofAt = (p) => roofs.filter(r => p.x > r.rect.x0 - EPS && p.x < r.rect.x1 + EPS && p.z > r.rect.z0 - EPS && p.z < r.rect.z1 + EPS);
+      const ridgeTs = roofs.flatMap(r => r.ridges.filter(rd => rd.axis === (S.axis === 'x' ? 'x' : 'z') && rd.value > ch.t0 && rd.value < ch.t1).map(rd => rd.value));
+      // Ook de randen van de daken: twee lessenaars die op een naad de nok vormen hebben geen eigen nok.
+      const edgeTs = roofs.flatMap(r => (S.axis === 'x' ? [r.rect.x0, r.rect.x1] : [r.rect.z0, r.rect.z1])).filter(t => t > ch.t0 + 1 && t < ch.t1 - 1);
+      const ts = [...new Set([ch.t0, ch.t1, ...ridgeTs, ...edgeTs].map(Math.round))].sort((a, b) => a - b);
+      let roofTop = -Infinity;
+      ts.forEach(t => [sIn, 0, sFront].forEach(s => roofAt(toW(t, s)).forEach(r => { roofTop = Math.max(roofTop, r.topAt(toW(t, s).x, toW(t, s).z)); })));
+      // Binnenkant tot de onderkant van het dak (vlak achter de wand gemeten).
+      const insideTop = ts.map(t => {
+        const p = toW(t, sIn - 1), r = roofAt(p);
+        return { t, y: r.length ? Math.min(...r.map(q => q.ceilingAt(p.x, p.z))) : floorTop + 2600 };
+      });
+      const under = Math.max(...insideTop.map(q => q.y));
+      if (!isFinite(roofTop)) roofTop = under + 300;
+      const yTop = Math.round(roofTop + ch.above);
+      const flue = {
+        t0: ch.t0 + SHELL_MM, t1: Math.max(ch.t0 + SHELL_MM + MIN_CUT_MM, ch.t1 - SHELL_MM),
+        s0: sIn + SHELL_MM, s1: Math.max(sIn + SHELL_MM + MIN_CUT_MM, sFront - SHELL_MM)
+      };
+      const corners = (q) => [toW(q.t0, q.s0), toW(q.t1, q.s0), toW(q.t1, q.s1), toW(q.t0, q.s1)];
+      return Object.assign({}, ch, {
+        T, sIn, sFace, sFront, yGround: groundY, yFloor: floorTop, yTop, yUnder: under, insideTop, flue,
+        footprint: corners({ t0: ch.t0, t1: ch.t1, s0: sIn, s1: sFront }), flueFootprint: corners(flue),
+        protrudes: Math.round(sFront - sFace), height: yTop - groundY
+      });
+    });
+  }
+
+  // Ligt een punt (wereld-mm) in of vlak voor een schoorsteen?
+  function covers(list, x, z, margin) {
+    const m = margin || 0;
+    return list.some(c => {
+      const S = SIDES[c.side];
+      const t = S.axis === 'z' ? z : x, s = S.axis === 'z' ? (x - c.plane) * S.n.x : (z - c.plane) * S.n.z;
+      return t > c.t0 - m && t < c.t1 + m && s > c.sIn - m && s < c.sFront + m;
+    });
+  }
+
+  function hit(list, x, z, margin) {
+    return list.find(c => covers([c], x, z, margin)) || null;
+  }
+
+  // Slepen: dichtstbijzijnde stuk buitengevel (omtrek van de units samen), hart van de schoorsteen erlangs zodat hij
+  // er helemaal tegen staat; ook over een naad tussen units heen. Geeft { unitId, side, u, t, plane, n } of null.
+  function snapToFacade(rects, x, z, w) {
+    const rs = rects.filter(r => !r.error);
+    if (!rs.length) return null;
+    const loop = rectUnionLoops(rs)[0];
+    if (!loop) return null;
+    const pts = loop.pts, n = pts.length;
+    let best = null;
+    for (let i = 0; i < n; i++) {
+      const a = pts[i], b = pts[(i + 1) % n], nrm = rectilinearNormal(a, b);
+      const side = Object.keys(SIDES).find(k => Math.abs(SIDES[k].n.x - nrm.x) < 1e-6 && Math.abs(SIDES[k].n.z - nrm.z) < 1e-6);
+      if (!side) continue;
+      const axis = SIDES[side].axis, lo = Math.min(axis === 'z' ? a.z : a.x, axis === 'z' ? b.z : b.x), hi = Math.max(axis === 'z' ? a.z : a.x, axis === 'z' ? b.z : b.x);
+      if (hi - lo < w + 2 * CORNER_CLEAR_MM) continue;
+      const plane = axis === 'z' ? a.x : a.z, along = axis === 'z' ? z : x, across = axis === 'z' ? x : z;
+      const t = Math.max(lo + w / 2 + CORNER_CLEAR_MM, Math.min(hi - w / 2 - CORNER_CLEAR_MM, along));
+      const d = Math.hypot(along - t, across - plane);
+      if (best && d >= best.d) continue;
+      const owner = rs.find(r => Math.abs(planeOf(r, side) - plane) < EPS && (axis === 'z' ? r.z0 <= t + EPS && r.z1 >= t - EPS : r.x0 <= t + EPS && r.x1 >= t - EPS));
+      if (!owner) continue;
+      const u = { voor: owner.x1 - t, achter: t - owner.x0, links: t - owner.z0, rechts: owner.z1 - t }[side];
+      best = { d, unitId: owner.id, side, u: Math.round(u), t, plane, n: SIDES[side].n };
+    }
+    return best;
+  }
+
+  function createMaterials() {
+    return {
+      cap: new THREE.MeshStandardMaterial({ color: 0x77736d, roughness: 0.85 }),
+      flue: new THREE.MeshStandardMaterial({ color: 0x1b1a19, roughness: 1, side: THREE.DoubleSide }),
+      plain: new THREE.MeshStandardMaterial({ color: 0xf2efe9, roughness: 0.9 })
+    };
+  }
+
+  const finishMaterial = (f, fallback) => f.type === 'steen' ? WallModel.stoneMaterial(f.stone) : f.type === 'stuc' ? WallModel.stucMaterial(f.stuc) : fallback;
+
+  // opts: { materials, wallMaterial (binnenkant 'wand': hetzelfde materiaal als de wanden) }
+  function build3D(list, opts) {
+    const o = opts || {}, m = o.materials || createMaterials(), toM = 0.001;
+    const group = new THREE.Group();
+    list.forEach(c => {
+      const S = SIDES[c.side];
+      const W = (t, s) => S.axis === 'z' ? { x: c.plane + S.n.x * s, z: t } : { x: t, z: c.plane + S.n.z * s };
+      const buckets = new Map();
+      const add = (mat, tri) => { if (!buckets.has(mat)) buckets.set(mat, { pos: [], uv: [] }); const b = buckets.get(mat); tri.forEach(v => { b.pos.push(v.x * toM, v.y * toM, v.z * toM); b.uv.push(v.u, v.v); }); };
+      // Verticaal vlak tussen p0 en p1 (wereld), buitennormaal nrm; hoogtes per kant. UV in meters (steen/stuc).
+      const quad = (mat, p0, p1, y0a, y1a, y0b, y1b, nrm) => {
+        const right = { x: nrm.z, z: -nrm.x };
+        if ((p1.x - p0.x) * right.x + (p1.z - p0.z) * right.z < 0) { [p0, p1] = [p1, p0]; [y0a, y0b] = [y0b, y0a]; [y1a, y1b] = [y1b, y1a]; }
+        const v = (p, y) => ({ x: p.x, y, z: p.z, u: (p.x * right.x + p.z * right.z) * toM, v: (y - c.yFloor) * toM });
+        const BL = v(p0, y0a), BR = v(p1, y0b), TR = v(p1, y1b), TL = v(p0, y1a);
+        add(mat, [BL, BR, TR]); add(mat, [BL, TR, TL]);
+      };
+      const nOut = S.n, nIn = { x: -S.n.x, z: -S.n.z };
+      const tDir = S.axis === 'z' ? { x: 0, z: 1 } : { x: 1, z: 0 }, tNeg = { x: -tDir.x, z: -tDir.z };
+      const outMat = finishMaterial(c.outside, m.plain);
+      const yG = c.yGround, yT = c.yTop;
+      quad(outMat, W(c.t0, c.sFront), W(c.t1, c.sFront), yG, yT, yG, yT, nOut);
+      quad(outMat, W(c.t0, c.sIn), W(c.t0, c.sFront), yG, yT, yG, yT, tNeg);
+      quad(outMat, W(c.t1, c.sIn), W(c.t1, c.sFront), yG, yT, yG, yT, tDir);
+      quad(outMat, W(c.t0, c.sIn), W(c.t1, c.sIn), c.yUnder, yT, c.yUnder, yT, nIn); // achterkant boven het dak
+
+      // Binnenkant: van de vloer tot de onderkant van het dak.
+      const k = skinOf(c.inside), inMat = finishMaterial(c.inside, o.wallMaterial || m.plain), sI = c.sIn - k;
+      for (let i = 0; i < c.insideTop.length - 1; i++) {
+        const a = c.insideTop[i], b = c.insideTop[i + 1];
+        quad(inMat, W(a.t, sI), W(b.t, sI), c.yFloor, a.y, c.yFloor, b.y, nIn);
+      }
+      if (k > 0) {
+        const first = c.insideTop[0], last = c.insideTop[c.insideTop.length - 1];
+        quad(inMat, W(c.t0, sI), W(c.t0, c.sIn), c.yFloor, first.y, c.yFloor, first.y, tNeg);
+        quad(inMat, W(c.t1, sI), W(c.t1, c.sIn), c.yFloor, last.y, c.yFloor, last.y, tDir);
+      }
+
+      // Rookkanaal: zwarte binnenwanden en bodem tot FLUE_SHOW_MM onder de kap.
+      const f = c.flue, yF = yT - Math.min(FLUE_SHOW_MM, c.above + 100);
+      quad(m.flue, W(f.t0, f.s0), W(f.t1, f.s0), yF, yT, yF, yT, nOut);
+      quad(m.flue, W(f.t0, f.s1), W(f.t1, f.s1), yF, yT, yF, yT, nIn);
+      quad(m.flue, W(f.t0, f.s0), W(f.t0, f.s1), yF, yT, yF, yT, tDir);
+      quad(m.flue, W(f.t1, f.s0), W(f.t1, f.s1), yF, yT, yF, yT, tNeg);
+      const fp = [W(f.t0, f.s0), W(f.t1, f.s0), W(f.t1, f.s1), W(f.t0, f.s1)].map(p => ({ x: p.x, y: yF, z: p.z, u: 0, v: 0 }));
+      add(m.flue, [fp[0], fp[1], fp[2]]); add(m.flue, [fp[0], fp[2], fp[3]]);
+
+      buckets.forEach((b, mat) => {
+        const geo = new THREE.BufferGeometry();
+        geo.setAttribute('position', new THREE.Float32BufferAttribute(b.pos, 3));
+        geo.setAttribute('uv', new THREE.Float32BufferAttribute(b.uv, 2));
+        geo.computeVertexNormals();
+        const mesh = new THREE.Mesh(geo, mat);
+        mesh.castShadow = mat !== m.flue;
+        mesh.receiveShadow = true;
+        group.add(mesh);
+      });
+
+      // Afdekplaat rond het rookkanaal (vier stroken).
+      const capY = (yT + CAP_MM / 2) * toM;
+      const strips = [
+        [c.t0 - CAP_OVER_MM, c.t1 + CAP_OVER_MM, c.sIn - CAP_OVER_MM, f.s0],
+        [c.t0 - CAP_OVER_MM, c.t1 + CAP_OVER_MM, f.s1, c.sFront + CAP_OVER_MM],
+        [c.t0 - CAP_OVER_MM, f.t0, f.s0, f.s1],
+        [f.t1, c.t1 + CAP_OVER_MM, f.s0, f.s1]
+      ];
+      strips.forEach(([ta, tb, sa, sb]) => {
+        if (tb - ta < 1 || sb - sa < 1) return;
+        const p = W((ta + tb) / 2, (sa + sb) / 2);
+        const [dx, dz] = S.axis === 'z' ? [sb - sa, tb - ta] : [tb - ta, sb - sa];
+        const box = new THREE.Mesh(new THREE.BoxGeometry(dx * toM, CAP_MM * toM, dz * toM), m.cap);
+        box.position.set(p.x * toM, capY, p.z * toM);
+        box.castShadow = box.receiveShadow = true;
+        group.add(box);
+      });
+    });
+    return group;
+  }
+
+  return { SHELL_MM, INSIDE_TYPES, OUTSIDE_TYPES, DEFAULTS, SIDES, normalize, create, place, wallCuts, roofCuts, resolve, covers, hit, snapToFacade, createMaterials, build3D };
+})();

js/house/house-dxf.js

@@ -0,0 +1,393 @@
+/*!
+ * Tectum
+ * Copyright © 2026 Machiel Heinen.
+ * Alle rechten voorbehouden. Gebruik uitsluitend met schriftelijke toestemming.
+ * Zie LICENTIE.md.
+ */
+// CAD-export van de woning (DXF): plattegrond en vier gevels in modelruimte, 1:1 in mm, met lagen per onderdeel.
+// Plattegrond: noord boven, zuidwesthoek van de units = 0,0. Gevels in een 2×2-raster eronder, maaiveld als basis.
+// Tekst, maatvoering en lijntypes zijn afgestemd op plotten op 1:50.
+
+window.HouseDxf = (() => {
+  const SCALE = 50;
+  const CUT = 1500;   // snijvlak plattegrond boven de vloer: openingen die lager beginnen zijn doorgesneden
+  const LAYERS = {
+    'PL-WAND-BUITEN': [7], 'PL-WAND-OPBOUW': [8], 'PL-GEVELBEKLEDING': [32], 'PL-WAND-BINNEN': [7],
+    'PL-KOZIJNEN': [4], 'PL-DRAAIRICHTING': [151], 'PL-SPARING-BOVEN': [4, 'STREEP'],
+    'PL-RUIMTE-GRENS': [3], 'PL-RUIMTE-TEKST': [7], 'PL-INRICHTING': [8], 'PL-DAKRAND': [8, 'STREEP'],
+    'PL-PALEN': [32], 'PL-SCHOORSTEEN': [8], 'PL-VERLICHTING': [2], 'PL-ELEKTRA': [6], 'PL-NADEN': [30, 'STREEPSTIP'],
+    'PL-ELEMENTCODES': [8],
+    'AZ-GEVEL': [7], 'AZ-TRASRAAM': [7], 'AZ-KOZIJNEN': [4], 'AZ-DAK': [7], 'AZ-DAKRAND': [8], 'AZ-SCHOORSTEEN': [8], 'AZ-MAAIVELD': [7],
+    'MAATVOERING': [5], 'TEKST': [7]
+  };
+  const FACE_LAYERS = { wand: 'AZ-GEVEL', opening: 'AZ-GEVEL', trasraam: 'AZ-TRASRAAM', dak: 'AZ-DAK', dakrand: 'AZ-DAKRAND', schoorsteen: 'AZ-SCHOORSTEEN' };
+  const mm = (paper) => paper * SCALE;
+
+  // Intervallen [a, b]: samenvoegen en aftrekken.
+  function mergeIv(list) {
+    const s = list.filter(([a, b]) => b > a).sort((p, q) => p[0] - q[0]);
+    const out = [];
+    s.forEach(([a, b]) => { const l = out[out.length - 1]; if (l && a <= l[1] + 1e-9) l[1] = Math.max(l[1], b); else out.push([a, b]); });
+    return out;
+  }
+  function subtractIv(from, cuts) {
+    let out = from.map(iv => iv.slice());
+    mergeIv(cuts).forEach(([c0, c1]) => {
+      out = out.flatMap(([a, b]) => {
+        if (c1 <= a || c0 >= b) return [[a, b]];
+        const r = [];
+        if (c0 > a) r.push([a, c0]);
+        if (c1 < b) r.push([c1, b]);
+        return r;
+      });
+    });
+    return out;
+  }
+
+  // Randen van een ruimte (RoomModel: as x/z, waarde v, s0..s1) tot gesloten lussen.
+  function roomLoops(edges) {
+    const key = (p) => Math.round(p.x) + ',' + Math.round(p.z);
+    const segs = edges.map(e => e.axis === 'x' ? [{ x: e.v, z: e.s0 }, { x: e.v, z: e.s1 }] : [{ x: e.s0, z: e.v }, { x: e.s1, z: e.v }]);
+    const at = new Map();
+    segs.forEach((s, i) => s.forEach(p => { const k = key(p); if (!at.has(k)) at.set(k, []); at.get(k).push(i); }));
+    const used = new Set(), out = [];
+    segs.forEach((s, i) => {
+      if (used.has(i)) return;
+      used.add(i);
+      const loop = [s[0], s[1]];
+      let cur = s[1];
+      while (key(cur) !== key(loop[0])) {
+        const j = (at.get(key(cur)) || []).find(n => !used.has(n));
+        if (j === undefined) break;
+        used.add(j);
+        cur = key(segs[j][0]) === key(cur) ? segs[j][1] : segs[j][0];
+        loop.push(cur);
+      }
+      const closed = key(loop[loop.length - 1]) === key(loop[0]);
+      if (closed) loop.pop();
+      const n = loop.length;
+      const pts = loop.filter((p, k) => {
+        if (!closed && (k === 0 || k === n - 1)) return true;
+        const a = loop[(k - 1 + n) % n], b = loop[(k + 1) % n];
+        return !((Math.abs(a.x - p.x) < 0.5 && Math.abs(b.x - p.x) < 0.5) || (Math.abs(a.z - p.z) < 0.5 && Math.abs(b.z - p.z) < 0.5));
+      });
+      out.push({ pts, closed });
+    });
+    return out;
+  }
+
+  // Cirkelboog door het eerste, middelste en laatste punt van een polylijn (draaicirkel van een deur).
+  function arcThrough(pts) {
+    const a = pts[0], b = pts[Math.floor(pts.length / 2)], c = pts[pts.length - 1];
+    const d = 2 * (a.x * (b.y - c.y) + b.x * (c.y - a.y) + c.x * (a.y - b.y));
+    if (Math.abs(d) < 1e-9) return null;
+    const s = (p) => p.x * p.x + p.y * p.y;
+    const ctr = { x: (s(a) * (b.y - c.y) + s(b) * (c.y - a.y) + s(c) * (a.y - b.y)) / d, y: (s(a) * (c.x - b.x) + s(b) * (a.x - c.x) + s(c) * (b.x - a.x)) / d };
+    const ang = (p) => Math.atan2(p.y - ctr.y, p.x - ctr.x);
+    const ccw = (b.x - a.x) * (c.y - a.y) - (b.y - a.y) * (c.x - a.x) > 0;
+    return { c: ctr, r: Math.hypot(a.x - ctr.x, a.y - ctr.y), a0: ccw ? ang(a) : ang(c), a1: ccw ? ang(c) : ang(a) };
+  }
+
+  // Tekstrichting langs een wand, altijd leesbaar (van onder of van rechts).
+  const readable = (deg) => { let a = ((deg % 360) + 360) % 360; if (a > 90.01 && a <= 270.01) a -= 180; return a; };
+
+  function drawPlan(dxf, parts, T) {
+    const W2 = (place, lx, lz) => T(UnitModel.localToWorld(place, lx, lz));
+    const ext = new Set();
+    parts.units.forEach(u => u.walls.forEach(w => w.pieces.forEach(p => ext.add(p))));
+    const P = KozijnModel.PROFILE;
+
+    HouseModel.allWallPieces(parts).forEach(p => {
+      const pl = p.place;
+      if (pl.baseY) return;
+      const isExt = ext.has(p);
+      const W = pl.width, zi = -pl.thickness / 2, zo = pl.thickness / 2;
+      const ops = (p.config.openings || []).filter(op => op.type !== 'schoorsteen');
+      const cutOps = ops.filter(op => op.y < CUT);
+      const holes = mergeIv(cutOps.map(op => [Math.max(-W / 2, -W / 2 + op.x), Math.min(W / 2, -W / 2 + op.x + op.w)]));
+      const solid = subtractIv([[-W / 2, W / 2]], holes);
+      const lay = isExt ? 'PL-WAND-BUITEN' : 'PL-WAND-BINNEN';
+      const box = (a, b, z0, z1, layer, eo) => dxf.polyline([W2(pl, a, z0), W2(pl, b, z0), W2(pl, b, z1), W2(pl, a, z1)], true, layer, eo);
+      solid.forEach(([a, b]) => box(a, b, zi, zo, lay));
+
+      const c = isExt ? WallModel.claddingOffset(p.buitenMateriaal, p.stone, p.stuc) : 0;
+      if (isExt) {
+        const sh = p.config.sheathingThick || 0;
+        if (sh > 0) solid.forEach(([a, b]) => [zi + sh, zo - sh].forEach(z => dxf.line(W2(pl, a, z), W2(pl, b, z), 'PL-WAND-OPBOUW')));
+        if (c > 0) {
+          // Hoek: buitenhoek loopt de bekleding door over de buurwand, binnenhoek stopt ze ervoor (skinExt < 0).
+          const e = p.skinExt || {};
+          const xl = -W / 2 - (e.left > 0 ? e.left + c : (e.left || 0)), xr = W / 2 + (e.right > 0 ? e.right + c : (e.right || 0));
+          subtractIv([[xl, xr]], holes).forEach(([a, b]) => box(a, b, zo, zo + c, 'PL-GEVELBEKLEDING'));
+        }
+      }
+
+      cutOps.forEach(op => {
+        const f = KozijnModel.normalize(op.fill);
+        if (!f) return;
+        const x0 = -W / 2 + op.x, x1 = x0 + op.w;
+        const exterior = p.buitenMateriaal === 'vochtdoek' || p.buitenMateriaal === 'cementplaat';
+        const kz1 = zo, kz0 = exterior ? Math.max(zi, zo - P.depth) : zi;
+        const a = x0 + P.gap, b = x1 - P.gap;
+        if (f.type === 'raam') {
+          box(a, b, kz0, kz1, 'PL-KOZIJNEN');
+          [a + P.kader, b - P.kader].forEach(x => dxf.line(W2(pl, x, kz0), W2(pl, x, kz1), 'PL-KOZIJNEN'));
+          dxf.line(W2(pl, a + P.kader, kz1 - 50), W2(pl, b - P.kader, kz1 - 50), 'PL-KOZIJNEN');
+          return;
+        }
+        box(a, a + P.kader, kz0, kz1, 'PL-KOZIJNEN');
+        box(b - P.kader, b, kz0, kz1, 'PL-KOZIJNEN');
+        KozijnModel.planSymbol(op, op.fill, { zIn: zi, zOut: zo }).forEach(sh => {
+          const pts = sh.pts.map(q => W2(pl, x0 + q.x, q.z));
+          if (sh.kind === 'arc') {
+            const arc = arcThrough(pts);
+            if (arc) dxf.arc(arc.c, arc.r, arc.a0, arc.a1, 'PL-DRAAIRICHTING');
+          } else if (sh.kind === 'rail') dxf.polyline(pts, !!sh.closed, 'PL-DRAAIRICHTING', { ltype: 'STIP' });
+          else dxf.polyline(pts, !!sh.closed, sh.kind === 'arrow' ? 'PL-DRAAIRICHTING' : 'PL-KOZIJNEN');
+        });
+      });
+      // Sparingen boven het snijvlak (bovenlichten, hoge ramen) gestreept, tenzij ze boven een doorgesneden opening liggen.
+      ops.filter(op => op.y >= CUT).forEach(op => {
+        const x0 = -W / 2 + op.x, x1 = x0 + op.w;
+        if (holes.some(([a, b]) => x0 >= a - 1 && x1 <= b + 1)) return;
+        box(x0, x1, zi, zo, 'PL-SPARING-BOVEN');
+      });
+
+      // Elementcode binnen langs de wand, verticaal gecentreerd op 2,5 mm (papier) van het binnenvlak.
+      const rot = readable(Math.atan2(W2(pl, 1, 0).y - W2(pl, 0, 0).y, W2(pl, 1, 0).x - W2(pl, 0, 0).x) * 180 / Math.PI) * Math.PI / 180;
+      const mid = W2(pl, 0, zi - mm(2.5)), th = mm(2);
+      dxf.text({ x: mid.x + Math.sin(rot) * th / 2, y: mid.y - Math.cos(rot) * th / 2 }, th, p.element, 'PL-ELEMENTCODES', { align: 'center', rot: rot * 180 / Math.PI });
+
+      if (isExt) {
+        const xs = [-W / 2, W / 2];
+        holes.forEach(([a, b]) => xs.push(a, b));
+        const ticks = [...new Set(xs.map(x => Math.round(x * 10) / 10))].sort((m, n) => m - n);
+        const zf = zo + c, row1 = zf + 700, row2 = row1 + 450;
+        for (let i = 0; i < ticks.length - 1; i++) {
+          dxf.dim(W2(pl, ticks[i], zf), W2(pl, ticks[i + 1], zf), W2(pl, (ticks[i] + ticks[i + 1]) / 2, row1), 'MAATVOERING');
+        }
+        if (ticks.length > 2) dxf.dim(W2(pl, -W / 2, zf), W2(pl, W / 2, zf), W2(pl, 0, row2), 'MAATVOERING');
+      }
+    });
+
+    const R = parts.rooms;
+    R.rooms.concat(R.free).forEach(r => {
+      roomLoops(r.edges || []).forEach(lp => dxf.polyline(lp.pts.map(T), lp.closed, 'PL-RUIMTE-GRENS'));
+      const named = !!r.name;
+      const lines = [[named ? r.name : 'Ruimte (geen functie)', 3.5], [`${r.areaM2.toLocaleString('nl-NL', { minimumFractionDigits: 2, maximumFractionDigits: 2 })} m²`, 2.5]];
+      if (r.ceilingActive) lines.push([`plafond ${r.ceiling}`, 2]);
+      const c = T(r.label), step = mm(4.5);
+      lines.forEach(([t, size], i) => dxf.text({ x: c.x, y: c.y + ((lines.length - 1) / 2 - i) * step - mm(size) / 2 }, mm(size), t, 'PL-RUIMTE-TEKST', { align: 'center' }));
+    });
+
+    (parts.fixtures || []).forEach(it => FixtureModel.planShapes(it).forEach(sh => {
+      const eo = sh.kind === 'dash' ? { ltype: 'STREEP' } : null;
+      if (sh.circle) dxf.circle(T(sh.circle), sh.circle.r, 'PL-INRICHTING', eo);
+      else if (sh.text) { const q = T(sh.at); dxf.text({ x: q.x, y: q.y - mm(0.7) }, mm(1.4), sh.text, 'PL-INRICHTING', { align: 'center' }); }
+      else dxf.polyline(sh.pts.map(T), !!sh.closed, 'PL-INRICHTING', eo);
+    }));
+
+    if (parts.roofEdge) {
+      parts.roofEdge.segments.forEach(sg => dxf.line(T(sg.outerA), T(sg.outerB), 'PL-DAKRAND'));
+      parts.roofEdge.spots.forEach(sp => dxf.circle(T(sp), mm(0.8), 'PL-VERLICHTING'));
+    } else {
+      parts.units.forEach(u => {
+        const r = u.roof.rect;
+        dxf.polyline([{ x: r.x0, z: r.z0 }, { x: r.x1, z: r.z0 }, { x: r.x1, z: r.z1 }, { x: r.x0, z: r.z1 }].map(T), true, 'PL-DAKRAND');
+      });
+    }
+    parts.posts.posts.forEach(pp => {
+      const s = pp.size / 2;
+      dxf.polyline([{ x: pp.x - s, z: pp.z - s }, { x: pp.x + s, z: pp.z - s }, { x: pp.x + s, z: pp.z + s }, { x: pp.x - s, z: pp.z + s }].map(T), true, 'PL-PALEN');
+    });
+    parts.posts.walls.forEach(w => dxf.polyline([{ x: w.x0, z: w.z0 }, { x: w.x1, z: w.z0 }, { x: w.x1, z: w.z1 }, { x: w.x0, z: w.z1 }].map(T), true, 'PL-PALEN'));
+    (parts.chimneys || []).forEach(ch => {
+      dxf.polyline(ch.footprint.map(T), true, 'PL-SCHOORSTEEN');
+      dxf.polyline(ch.flueFootprint.map(T), true, 'PL-SCHOORSTEEN');
+    });
+    parts.lighting.lamps.forEach(l => {
+      const q = T({ x: l.x + l.normal.x * 80, z: l.z + l.normal.z * 80 }), s = mm(0.9);
+      dxf.polyline([{ x: q.x - s, y: q.y - s }, { x: q.x + s, y: q.y - s }, { x: q.x + s, y: q.y + s }, { x: q.x - s, y: q.y + s }], true, 'PL-VERLICHTING');
+    });
+    const o = T({ x: 0, z: 0 });
+    ElektraPdf.drawPlan(DxfWriter.pdfAdapter(dxf, 'PL-ELEKTRA'), parts.elektra, (x) => (x + o.x) / SCALE, (z) => (z - o.y) / SCALE);
+    parts.seams.forEach(s => dxf.line(T({ x: s.x0, z: s.z0 }), T({ x: s.x1, z: s.z1 }), 'PL-NADEN'));
+    parts.rects.forEach(r => {
+      const q = T({ x: r.x0 + 450, z: r.z0 + 450 });
+      dxf.text({ x: q.x, y: q.y - mm(8) }, mm(8), r.id, 'PL-ELEMENTCODES');
+    });
+
+    // Totaalmaten en noordpijl buiten alles.
+    const rects = parts.rects;
+    const bx0 = Math.min(...rects.map(r => r.x0)), bx1 = Math.max(...rects.map(r => r.x1));
+    const bz0 = Math.min(...rects.map(r => r.z0)), bz1 = Math.max(...rects.map(r => r.z1));
+    const e = dxf.extents();
+    dxf.dim(T({ x: bx0, z: bz0 }), T({ x: bx1, z: bz0 }), { x: 0, y: e.y1 + 700 }, 'MAATVOERING');
+    dxf.dim(T({ x: bx0, z: bz1 }), T({ x: bx0, z: bz0 }), { x: e.x0 - 700, y: 0 }, 'MAATVOERING');
+    const na = { x: e.x1 + mm(10), y: e.y1 - mm(4) }, ns = mm(4);
+    dxf.polyline([{ x: na.x, y: na.y + ns }, { x: na.x - ns * 0.4, y: na.y - ns * 0.6 }, { x: na.x, y: na.y - ns * 0.3 }, { x: na.x + ns * 0.4, y: na.y - ns * 0.6 }], true, 'TEKST');
+    dxf.text({ x: na.x, y: na.y - ns * 0.6 - mm(5) }, mm(3.5), 'N', 'TEKST', { align: 'center' });
+  }
+
+  function simplifyPoly(pts) {
+    let p = pts.filter((q, i) => { const r = pts[(i + 1) % pts.length]; return Math.hypot(r.x - q.x, r.y - q.y) > 0.5; });
+    let changed = true;
+    while (changed && p.length > 3) {
+      changed = false;
+      for (let i = 0; i < p.length; i++) {
+        const a = p[(i - 1 + p.length) % p.length], b = p[i], c = p[(i + 1) % p.length];
+        const len = Math.hypot(c.x - a.x, c.y - a.y);
+        if (len > 0 && Math.abs((c.x - a.x) * (b.y - a.y) - (c.y - a.y) * (b.x - a.x)) / len < 0.5) { p.splice(i, 1); changed = true; break; }
+      }
+    }
+    return p;
+  }
+
+  const insidePoly = (q, poly) => {
+    let inside = false;
+    for (let i = 0, j = poly.length - 1; i < poly.length; j = i++) {
+      const a = poly[i], b = poly[j];
+      if ((a.y > q.y) !== (b.y > q.y) && q.x < (b.x - a.x) * (q.y - a.y) / (b.y - a.y) + a.x) inside = !inside;
+    }
+    return inside;
+  };
+  const distSeg = (q, a, b) => {
+    const dx = b.x - a.x, dy = b.y - a.y, l2 = dx * dx + dy * dy;
+    const t = l2 ? Math.max(0, Math.min(1, ((q.x - a.x) * dx + (q.y - a.y) * dy) / l2)) : 0;
+    return Math.hypot(q.x - a.x - t * dx, q.y - a.y - t * dy);
+  };
+  // Echt binnen (niet op de rand): lijnen die samenvallen met de rand van een vlak ervoor blijven zichtbaar.
+  const strictlyInside = (q, poly) => insidePoly(q, poly) && poly.every((a, i) => distSeg(q, a, poly[(i + 1) % poly.length]) > 0.5);
+
+  // Delen [t0, t1] van segment a-b die door poly worden afgedekt.
+  function coveredBy(a, b, poly) {
+    const ts = [0, 1], dx = b.x - a.x, dy = b.y - a.y;
+    poly.forEach((c, i) => {
+      const d = poly[(i + 1) % poly.length], ex = d.x - c.x, ey = d.y - c.y;
+      const den = dx * ey - dy * ex;
+      if (Math.abs(den) < 1e-9) return;
+      const t = ((c.x - a.x) * ey - (c.y - a.y) * ex) / den, s = ((c.x - a.x) * dy - (c.y - a.y) * dx) / den;
+      if (t > 0 && t < 1 && s >= -1e-9 && s <= 1 + 1e-9) ts.push(t);
+    });
+    ts.sort((m, n) => m - n);
+    const out = [];
+    for (let i = 0; i < ts.length - 1; i++) {
+      const t0 = ts[i], t1 = ts[i + 1];
+      if (t1 - t0 < 1e-7) continue;
+      const tm = (t0 + t1) / 2;
+      if (!strictlyInside({ x: a.x + dx * tm, y: a.y + dy * tm }, poly)) continue;
+      const l = out[out.length - 1];
+      if (l && Math.abs(l[1] - t0) < 1e-7) l[1] = t1; else out.push([t0, t1]);
+    }
+    return out;
+  }
+
+  // Verborgen lijnen weg: vlakken van achter naar voor, elke rand wordt afgedekt door de vlakken die later komen.
+  function hiddenLines(faces) {
+    const boxOf = (pts) => ({ x0: Math.min(...pts.map(p => p.x)), x1: Math.max(...pts.map(p => p.x)), y0: Math.min(...pts.map(p => p.y)), y1: Math.max(...pts.map(p => p.y)) });
+    const hit = (a, b) => a.x0 < b.x1 && b.x0 < a.x1 && a.y0 < b.y1 && b.y0 < a.y1;
+    faces.forEach(f => { f.box = boxOf(f.poly); });
+    const out = [];
+    faces.forEach((f, i) => {
+      const segs = [];
+      const ring = (pts, layer) => pts.forEach((a, k) => segs.push({ a, b: pts[(k + 1) % pts.length], layer }));
+      ring(f.poly, f.layer);
+      f.detail.forEach(pl => ring(pl, 'AZ-KOZIJNEN'));
+      segs.forEach(sg => {
+        const len = Math.hypot(sg.b.x - sg.a.x, sg.b.y - sg.a.y);
+        if (len < 1) return;
+        const sb = boxOf([sg.a, sg.b]);
+        sb.x0 -= 1; sb.y0 -= 1; sb.x1 += 1; sb.y1 += 1;
+        let vis = [[0, 1]];
+        for (let j = i + 1; j < faces.length && vis.length; j++) {
+          if (!hit(sb, faces[j].box)) continue;
+          const cov = coveredBy(sg.a, sg.b, faces[j].poly);
+          if (cov.length) vis = subtractIv(vis, cov);
+        }
+        const at = (t) => ({ x: sg.a.x + (sg.b.x - sg.a.x) * t, y: sg.a.y + (sg.b.y - sg.a.y) * t });
+        vis.forEach(([t0, t1]) => { if ((t1 - t0) * len > 1) out.push({ a: at(t0), b: at(t1), layer: sg.layer }); });
+      });
+    });
+    return out;
+  }
+
+  // Samenvallende en in elkaars verlengde liggende stukken per laag samenvoegen (gedeelde randen maar één keer).
+  function mergeCollinear(segs) {
+    const groups = new Map();
+    segs.forEach(s => {
+      let dx = s.b.x - s.a.x, dy = s.b.y - s.a.y;
+      const len = Math.hypot(dx, dy);
+      dx /= len; dy /= len;
+      if (dx < -1e-9 || (Math.abs(dx) < 1e-9 && dy < 0)) { dx = -dx; dy = -dy; }
+      const off = -dy * s.a.x + dx * s.a.y;
+      const key = `${s.layer}|${Math.round(Math.atan2(dy, dx) * 2000)}|${Math.round(off)}`;
+      if (!groups.has(key)) groups.set(key, { dx, dy, off, layer: s.layer, iv: [] });
+      const g = groups.get(key);
+      const ta = s.a.x * dx + s.a.y * dy, tb = s.b.x * dx + s.b.y * dy;
+      g.iv.push([Math.min(ta, tb), Math.max(ta, tb)]);
+    });
+    const out = [];
+    groups.forEach(g => mergeIv(g.iv).forEach(([t0, t1]) => {
+      const p = (t) => ({ x: g.dx * t - g.dy * g.off, y: g.dy * t + g.dx * g.off });
+      out.push({ a: p(t0), b: p(t1), layer: g.layer });
+    }));
+    return out;
+  }
+
+  function drawViews(dxf, parts, state, planExt) {
+    const { groundY, views } = HousePdf.viewProjections(parts, state);
+    if (!views.length) return;
+    const floorTop = Math.max(...parts.units.map(u => u.layout.floorTop));
+    const maxW = Math.max(...views.map(w => w.u1 - w.u0)), maxH = Math.max(...views.map(w => w.v1 - groundY));
+    const gapX = 5000, cellH = maxH + 4500;
+    views.forEach((w, i) => {
+      const col = i % 2, row = Math.floor(i / 2);
+      const ox = planExt.x0 + col * (maxW + gapX) - w.u0;
+      const base = planExt.y0 - 3500 - maxH - row * cellH;
+      const P = (u, v) => ({ x: ox + u, y: base + (v - groundY) });
+
+      const faces = w.list.map(l => ({
+        poly: simplifyPoly(l.pts.map(p => ({ x: p.u, y: p.v }))),
+        layer: FACE_LAYERS[l.f.kind] || 'AZ-GEVEL',
+        detail: (l.f.detail || []).map(pl => simplifyPoly(pl.map(p => ({ x: w.v.u(p), y: p.y }))))
+      })).filter(f => f.poly.length >= 3);
+      mergeCollinear(hiddenLines(faces)).forEach(s => dxf.line(P(s.a.x, s.a.y), P(s.b.x, s.b.y), s.layer));
+
+      dxf.line(P(w.u0 - 1000, groundY), P(w.u1 + 1000, groundY), 'AZ-MAAIVELD');
+      const left = P(w.u0, groundY), xd = left.x - 900;
+      if (floorTop - groundY > 1) dxf.dim(P(w.u0, groundY), P(w.u0, floorTop), { x: xd, y: 0 }, 'MAATVOERING', { dir: { x: 0, y: 1 } });
+      dxf.dim(P(w.u0, floorTop), P(w.u0, w.v1), { x: xd, y: 0 }, 'MAATVOERING', { dir: { x: 0, y: 1 } });
+      const peil = P(w.u0, floorTop);
+      dxf.line({ x: xd - mm(10), y: peil.y }, { x: xd - mm(2), y: peil.y }, 'MAATVOERING');
+      dxf.text({ x: xd - mm(10), y: peil.y + mm(1) }, mm(2), 'peil', 'MAATVOERING');
+      dxf.dim(P(w.u0, groundY), P(w.u1, groundY), { x: 0, y: base - 700 }, 'MAATVOERING');
+      dxf.text(P((w.u0 + w.u1) / 2, groundY - 1300 - mm(5)), mm(5), w.v.title.toUpperCase(), 'TEKST', { align: 'center' });
+    });
+  }
+
+  function generate(state) {
+    const parts = HouseModel.computeParts(state, { skip3D: true });
+    if (!parts.units.length) throw new Error('geen units in het ontwerp');
+    const dxf = DxfWriter.create({ scale: SCALE });
+    Object.entries(LAYERS).forEach(([name, [color, ltype]]) => dxf.layer(name, color, ltype));
+    const bx0 = Math.min(...parts.rects.map(r => r.x0)), bz1 = Math.max(...parts.rects.map(r => r.z1));
+    const T = (p) => ({ x: p.x - bx0, y: bz1 - p.z });
+
+    drawPlan(dxf, parts, T);
+    const planExt = dxf.extents();
+    dxf.text({ x: planExt.x0, y: planExt.y0 - mm(12) }, mm(5), 'PLATTEGROND', 'TEKST');
+    drawViews(dxf, parts, state, planExt);
+
+    const pr = state.project || {};
+    const version = typeof APP_VERSION !== 'undefined' ? ` ${APP_VERSION}` : '';
+    const info = [
+      pr.naam, [pr.straat, pr.nummer].filter(Boolean).join(' '), pr.plaats,
+      `Tectum${version}, ${new Date().toLocaleDateString('nl-NL')}`,
+      'Maten in mm, peil = bovenkant vloer; tekst en maatvoering voor 1:50.'
+    ].filter(Boolean);
+    info.forEach((t, i) => dxf.text({ x: planExt.x1 + mm(30), y: planExt.y1 - mm(5) - i * mm(4.5) }, mm(i === 0 && pr.naam ? 3.5 : 2.5), t, 'TEKST'));
+    return dxf;
+  }
+
+  return { generate, LAYERS };
+})();

js/house/house-ifc.js

@@ -0,0 +1,187 @@
+/*!
+ * Tectum
+ * Copyright © 2026 Machiel Heinen.
+ * Alle rechten voorbehouden. Gebruik uitsluitend met schriftelijke toestemming.
+ * Zie LICENTIE.md.
+ */
+// BIM-export van de bouwconstructie (IFC4): balken, platen en elektra, geen afwerking of inrichting.
+// De geometrie komt uit de 3D-opbouw (dezelfde als in de app), in twee fasen: 'elektra' (alle balken en
+// leidingen, nog zonder platen, dus niets weggelaten) en 'beplating' (alleen de platen).
+// Assen: X = oost, Y = noord, Z = omhoog; 0,0 = zuidwesthoek van de units, Z = 0 op peil (bovenkant vloer).
+// Opbouw: unit (samenstelling) > element A-W1 / A-V / A-D (samenstelling) > onderdelen; binnenwanden los.
+
+window.HouseIfc = (() => {
+  const WOOD = 'Hout', ELEKTRA_KIND = { kast: 1, doos: 1, buis: 1 };
+  // Productiekleuren per soort (elektra houdt de kleur uit de app).
+  const COLORS = {
+    Stijl: [0.93, 0.74, 0.42], Regel: [0.85, 0.48, 0.18], Vloerbalk: [0.62, 0.40, 0.20], Dakbalk: [0.78, 0.30, 0.22],
+    Paal: [0.45, 0.28, 0.15], 'Stalen nokbalk': [0.35, 0.42, 0.55],
+    Spaanplaat: [0.40, 0.68, 0.42], OSB: [0.95, 0.86, 0.50], Cementplaat: [0.62, 0.64, 0.68]
+  };
+  const rgbOf = (mesh) => { const m = Array.isArray(mesh.material) ? mesh.material[0] : mesh.material; return m && m.color ? [m.color.r, m.color.g, m.color.b] : null; };
+
+  function materialsSet() {
+    return {
+      wall: WallModel.createMaterials(), floor: FloorModel.createMaterials(), roof: RoofModel.createMaterials(),
+      elektra: ElektraModel.createMaterials(), post: PostModel.createMaterials()
+    };
+  }
+
+  // Materiaal -> soort onderdeel (alles wat hier niet in staat, gaat niet mee).
+  function classifier(M) {
+    const map = new Map();
+    map.set(M.wall.woodMaterial, { kind: 'hout', where: 'wand' });
+    map.set(M.floor.woodMaterial, { kind: 'hout', where: 'vloer' });
+    map.set(M.roof.woodMaterial, { kind: 'hout', where: 'dak' });
+    map.set(M.roof.steelMaterial, { kind: 'staal' });
+    map.set(M.wall.spaanplaatMaterial, { kind: 'plaat', label: 'Spaanplaat' });
+    map.set(M.wall.cementplaatMaterial, { kind: 'plaat', label: 'Cementplaat' });
+    map.set(M.floor.osbMaterial, { kind: 'plaat', label: 'OSB' });
+    map.set(M.roof.osbMaterial, { kind: 'plaat', label: 'OSB' });
+    Object.entries(M.elektra.conduit).forEach(([type, m]) => map.set(m, { kind: 'buis', type }));
+    map.set(M.elektra.boxMaterial, { kind: 'doos' });
+    map.set(M.elektra.kastMaterial, { kind: 'kast' });
+    map.set(M.elektra.deurMaterial, { kind: 'kast' });
+    Object.values(M.post.wood).forEach(m => map.set(m, { kind: 'paal' }));
+    return (mesh) => {
+      const m0 = Array.isArray(mesh.material) ? mesh.material[0] : mesh.material;
+      return m0 ? map.get((m0.userData && m0.userData.base) || m0) || null : null;
+    };
+  }
+
+  // rough: buizen en dozen bouwen; de plaatfase verzamelt alleen platen en heeft ze niet nodig.
+  function build(state, layers, rough) {
+    const M = materialsSet();
+    const parts = HouseModel.computeParts(state, {
+      wallMaterials: M.wall, floorMaterials: M.floor, roofMaterials: M.roof, elektraMaterials: M.elektra, postMaterials: M.post,
+      layers, elektraRough: rough
+    });
+    HouseModel.placeGroups(parts);
+    return { parts, classify: classifier(M) };
+  }
+
+  function generate(state) {
+    const frame = build(state, ViewLayers.upTo(1), true);
+    const sheet = build(state, ViewLayers.upTo(2), false);
+    const parts = frame.parts;
+    if (!parts.units.length) throw new Error('geen units in het ontwerp');
+    const bx0 = Math.min(...parts.rects.map(r => r.x0)), bz1 = Math.max(...parts.rects.map(r => r.z1));
+    const peil = Math.max(...parts.units.map(u => u.layout.floorTop));
+
+    const v = new THREE.Vector3(), ax = new THREE.Vector3(), box = new THREE.Box3(), size = new THREE.Vector3();
+    function triangles(mesh, out) {
+      const g = mesh.geometry, pos = g.attributes.position, idx = g.index;
+      const n = idx ? idx.count : pos.count;
+      for (let i = 0; i < n; i++) {
+        v.fromBufferAttribute(pos, idx ? idx.getX(i) : i).applyMatrix4(mesh.matrixWorld);
+        out.push(v.x * 1000 - bx0, bz1 - v.z * 1000, v.y * 1000 - peil);
+      }
+      return out;
+    }
+    // Maat in de eigen assen (afgeschuinde sporen houden zo lengte en dikte), oplopend in mm.
+    function dims(mesh) {
+      if (!mesh.geometry.boundingBox) mesh.geometry.computeBoundingBox();
+      box.copy(mesh.geometry.boundingBox).getSize(size);
+      const s = [size.x * Math.abs(mesh.scale.x), size.y * Math.abs(mesh.scale.y), size.z * Math.abs(mesh.scale.z)].map(d => Math.round(d * 1000));
+      const longest = s.indexOf(Math.max(...s));
+      ax.set(longest === 0 ? 1 : 0, longest === 1 ? 1 : 0, longest === 2 ? 1 : 0).transformDirection(mesh.matrixWorld);
+      return { sorted: s.slice().sort((a, b) => a - b), vertical: Math.abs(ax.y) > 0.7 };
+    }
+    const label = (d) => d.sorted.join(' × ');
+
+    const groups = new Map();   // sleutel -> { name, tag, objectType, unit, members: [] }
+    const loose = [];
+    const merged = new Map();   // leidingen per run, meterkast
+    const groupOf = (key, info) => { if (!groups.has(key)) groups.set(key, Object.assign({ members: [] }, info)); return groups.get(key); };
+
+    function member(mesh, c, tag) {
+      const d = dims(mesh);
+      if (d.sorted[0] < 1) return null;   // vlakken zonder dikte (kopse afdekking)
+      const tri = triangles(mesh, []);
+      const props = (name, material) => ({ Element: tag || null, Onderdeel: name, Afmeting: label(d), Lengte: d.sorted[2], Materiaal: material });
+      if (c.kind === 'plaat') {
+        const name = `${c.label} ${d.sorted[0]} mm`;
+        return { type: 'IFCPLATE', predefined: 'SHEET', name, material: c.label, tri, color: COLORS[c.label], props: props(name, c.label) };
+      }
+      const el = (type, predefined, name, material) => ({ type, predefined, name, material, tri, color: COLORS[name], props: props(name, material) });
+      if (c.kind === 'staal') return el('IFCBEAM', 'BEAM', 'Stalen nokbalk', 'Staal');
+      if (c.kind === 'paal') return el('IFCCOLUMN', 'COLUMN', 'Paal', WOOD);
+      if (c.where === 'vloer') return el('IFCBEAM', 'JOIST', 'Vloerbalk', WOOD);
+      if (c.where === 'dak') return el('IFCMEMBER', 'RAFTER', 'Dakbalk', WOOD);
+      return d.vertical ? el('IFCMEMBER', 'STUD', 'Stijl', WOOD) : el('IFCMEMBER', 'PLATE', 'Regel', WOOD);
+    }
+
+    function collect(src, group, plates, target) {
+      if (!group) return;
+      group.updateMatrixWorld(true);
+      group.traverseVisible(o => {
+        if (!o.isMesh) return;
+        const c = src.classify(o);
+        if (!c || (c.kind === 'plaat') !== plates) return;
+        if (ELEKTRA_KIND[c.kind]) {
+          if (c.kind === 'doos') {
+            loose.push({ type: 'IFCJUNCTIONBOX', predefined: 'POWER', name: 'Inbouwdoos', material: 'Kunststof', tri: triangles(o, []), color: rgbOf(o), props: { Onderdeel: 'Inbouwdoos', Materiaal: 'Kunststof' } });
+            return;
+          }
+          const key = c.kind === 'kast' ? 'kast' : `buis:${o.userData.run}`;
+          if (!merged.has(key)) {
+            merged.set(key, c.kind === 'kast'
+              ? { type: 'IFCELECTRICDISTRIBUTIONBOARD', predefined: 'DISTRIBUTIONBOARD', name: 'Meterkast', material: 'Kunststof', tri: [], color: rgbOf(o), props: { Onderdeel: 'Meterkast' } }
+              : { type: 'IFCCABLECARRIERSEGMENT', predefined: 'CONDUITSEGMENT', name: `Installatiebuis ${c.type}`, material: `PVC ${c.type}`, tri: [], len: 0, color: rgbOf(o), props: { Onderdeel: `Installatiebuis ${c.type}`, Materiaal: 'PVC' } });
+          }
+          const e = merged.get(key);
+          triangles(o, e.tri);
+          if (e.len !== undefined && o.geometry.type === 'CylinderGeometry') e.len += o.geometry.parameters.height * 1000;
+          return;
+        }
+        const m = member(o, c, target && target.tag);
+        if (m) (target ? target.members : loose).push(m);
+      });
+    }
+
+    [[frame, false], [sheet, true]].forEach(([src, plates]) => {
+      const P = src.parts;
+      P.units.forEach(u => {
+        collect(src, u.floorGroup, plates, groupOf(u.floorElement, { name: `Unit ${u.id} vloer`, tag: u.floorElement, objectType: 'Vloerelement', unit: u.id }));
+        u.walls.forEach(w => w.pieces.forEach(p => {
+          collect(src, p.group, plates, groupOf(p.element, { name: p.label, tag: p.element, objectType: 'Wandelement', unit: u.id }));
+        }));
+        collect(src, u.roof.group, plates, groupOf(`${u.id}-D`, { name: `Unit ${u.id} dak`, tag: `${u.id}-D`, objectType: 'Dakelement', unit: u.id }));
+      });
+      P.interior.forEach(p => collect(src, p.group, plates, groupOf(p.element, { name: p.label, tag: p.element, objectType: 'Binnenwand', unit: null })));
+      collect(src, P.postsGroup, plates, null);
+      collect(src, P.elektraGroup, plates, null);
+    });
+    merged.forEach(e => {
+      if (e.len) e.props.Lengte = Math.round(e.len);
+      delete e.len;
+      loose.push(e);
+    });
+
+    const pr = state.project || {};
+    const ifc = IfcWriter.create({
+      project: pr.naam || 'Woning', building: pr.naam || 'Woning', author: pr.tekenaar || '',
+      app: `Tectum${typeof APP_VERSION !== 'undefined' ? ' ' + APP_VERSION : ''}`,
+      address: { lines: [pr.straat, pr.nummer].filter(Boolean).join(' '), town: pr.plaats || '' }
+    });
+    const unitParts = new Map(parts.units.map(u => [u.id, []]));
+    groups.forEach(g => {
+      const ids = g.members.map(m => ifc.element(m)).filter(Boolean);
+      if (!ids.length) return;
+      const asm = ifc.element({ type: 'IFCELEMENTASSEMBLY', name: g.name, tag: g.tag, objectType: g.objectType, props: { Element: g.tag } });
+      ifc.aggregate(asm, ids);
+      if (g.unit && unitParts.has(g.unit)) unitParts.get(g.unit).push(asm);
+      else ifc.contain(asm);
+    });
+    unitParts.forEach((ids, id) => {
+      if (!ids.length) return;
+      const asm = ifc.element({ type: 'IFCELEMENTASSEMBLY', name: `Unit ${id}`, tag: id, objectType: 'Unit' });
+      ifc.aggregate(asm, ids);
+      ifc.contain(asm);
+    });
+    loose.forEach(e => ifc.contain(ifc.element(e)));
+    return ifc;
+  }
+
+  return { generate };
+})();

js/house/house-pdf.js

@@ -32,7 +32,8 @@ window.HousePdf = (() => {
       list.push({ kind: 'floor', element: u.floorElement, label: `Unit ${u.id} vloer`, unit: u });
       u.walls.forEach(w => w.pieces.forEach(p => list.push({ kind: 'wall', element: p.element, label: p.label, piece: p })));
       u.roof.planes.forEach(pl => list.push({ kind: 'roof', element: pl.element, label: pl.label, plane: pl }));
-      if (u.roof.unitRoof && u.roof.unitRoof.cap) list.push({ kind: 'cap', element: `${u.id}-D${u.roof.planes.length + 1}`, label: `Unit ${u.id} dak bovenste deel (wolfsdak)`, unit: u });
+      const cap = u.roof.unitRoof && u.roof.unitRoof.cap;
+      if (cap) list.push({ kind: 'cap', element: `${u.id}-D${u.roof.planes.length + 1}`, label: cap.kind === 'join' ? `Unit ${u.id} dak (aansluiting)` : `Unit ${u.id} dak bovenste deel (wolfsdak)`, unit: u });
     });
     parts.interior.forEach(p => list.push({ kind: 'wall', element: p.element, label: p.label, piece: p }));
     list.push({ kind: 'totals', element: 'TOT', label: 'Totalen' });
@@ -86,7 +87,7 @@ window.HousePdf = (() => {
       doc.setDrawColor(...BLACK);
       doc.setFillColor(255, 255, 255);
       doc.setLineWidth(0.2);
-      p.config.openings.forEach(op => {
+      p.config.openings.filter(op => op.type !== 'schoorsteen').forEach(op => {
         const c = pieceCorners(p.place, -p.place.width / 2 + op.x, -p.place.width / 2 + op.x + op.w);
         poly(c, 'FD');
         doc.line(px(c[0].x), py(c[0].z), px(c[2].x), py(c[2].z));
@@ -134,6 +135,18 @@ window.HousePdf = (() => {
       parts.roofEdge.spots.forEach(sp => doc.circle(px(sp.x), py(sp.z), 0.8, 'FD'));
     }
     doc.setLineDashPattern([], 0);
+    doc.setDrawColor(...BLACK);
+    doc.setLineWidth(0.2);
+    doc.setFillColor(160, 124, 84);
+    parts.posts.posts.forEach(pp => doc.rect(px(pp.x - pp.size / 2), py(pp.z - pp.size / 2), pp.size * scale, pp.size * scale, 'FD'));
+    doc.setFillColor(235, 235, 232);
+    parts.posts.walls.forEach(w => doc.rect(px(w.x0), py(w.z0), (w.x1 - w.x0) * scale, (w.z1 - w.z0) * scale, 'FD'));
+    (parts.chimneys || []).forEach(ch => {
+      doc.setFillColor(150, 150, 150);
+      poly(ch.footprint, 'FD');
+      doc.setFillColor(30, 30, 30);
+      poly(ch.flueFootprint, 'F');
+    });
 
     doc.setDrawColor(...BLACK);
     doc.setFillColor(255, 211, 107);
@@ -235,10 +248,10 @@ window.HousePdf = (() => {
       const W = p.place.width, T = p.place.thickness;
       const c = WallModel.claddingOffset(p.buitenMateriaal, p.stone, p.stuc), e = p.skinExt || {};
       const xl = -W / 2 - (e.left > 0 ? e.left + c : 0), xr = W / 2 + (e.right > 0 ? e.right + c : 0);
-      const tl = WallModel.topLine(p.config), up = p.skinAbove || 0;
-      const top = (x) => tl.at(Math.max(-W / 2, Math.min(W / 2, x))) + up;
+      const tl = WallModel.topLine(WallModel.skinConfig(p.config, p.skinAbove || 0, p.skinTop));
+      const top = (x) => Math.min(tl.at(x), tl.at(Math.max(-W / 2, Math.min(W / 2, x))));
       const loc = [{ x: xl, y: y0 }, { x: xr, y: y0 }, { x: xr, y: top(xr) }]
-        .concat(tl.pts.slice().reverse().filter(q => q.x > xl + 1 && q.x < xr - 1).map(q => ({ x: q.x, y: q.y + up })))
+        .concat(tl.pts.slice().reverse().filter(q => q.x > xl + 1 && q.x < xr - 1).map(q => ({ x: q.x, y: q.y })))
         .concat([{ x: xl, y: top(xl) }]);
       return loc;
     };
@@ -246,22 +259,25 @@ window.HousePdf = (() => {
     const addWall = (p, y0) => {
       const n = { x: p.place.normal.x, z: p.place.normal.y };
       const zOut = p.place.thickness / 2 + WallModel.claddingOffset(p.buitenMateriaal, p.stone, p.stuc);
-      const color = p.stone ? (WallModel.STONE_COLORS[p.stone] || '#a0724f') : p.stuc ? WallModel.stucHex(p.stuc) : WallModel.rabatHex(state.settings.facade.rabatColor);
-      faces.push({ pts: wallFace(p, y0).map(q => toWorld(p, q.x, q.y, zOut)), n, color, bias: 0 });
+      const color = p.stone ? (WallModel.STONE_COLORS[p.stone] || '#a0724f') : p.stuc ? WallModel.stucHex(p.stuc) : p.fels ? WallModel.felsHex(p.fels)
+        : WallModel.rabatHex(state.settings.facade.rabatColor);
+      faces.push({ kind: 'wand', pts: wallFace(p, y0).map(q => toWorld(p, q.x, q.y, zOut)), n, color, bias: 0 });
       const tr = p.trasraam;
       if (tr && tr.top > y0) {
         const W = p.place.width;
         const band = wallFace(p, y0).map(q => ({ x: q.x, y: Math.min(q.y, tr.top) }));
         const trColor = WallModel.isStoneFinish(tr.finish) ? (WallModel.STONE_COLORS[tr.finish] || '#a0724f') : VIEW_COLORS.cementplaat;
         const zT = p.place.thickness / 2 + (WallModel.isStoneFinish(tr.finish) ? WallModel.STONE.THICK_MM : 12);
-        faces.push({ pts: band.map(q => toWorld(p, q.x, q.y, zT)), n, color: trColor, bias: 1 });
+        faces.push({ kind: 'trasraam', pts: band.map(q => toWorld(p, q.x, q.y, zT)), n, color: trColor, bias: 1 });
       }
-      (p.config.openings || []).forEach(op => {
+      (p.config.openings || []).filter(op => op.type !== 'schoorsteen').forEach(op => {
         if (WallModel.openingTopMax(op) <= y0) return;
         const x0 = -p.place.width / 2 + op.x, x1 = x0 + op.w, ya = Math.max(y0, op.y);
         const ybL = Math.max(ya, op.y + op.h), ybR = Math.max(ya, op.y + op.hR);
         const color = op.type === 'raam' ? VIEW_COLORS.glas : VIEW_COLORS.deur;
-        faces.push({ pts: [[x0, ya], [x1, ya], [x1, ybR], [x0, ybL]].map(([lx, ly]) => toWorld(p, lx, ly, zOut)), n, color, bias: 2, window: true });
+        const exterior = p.buitenMateriaal === 'vochtdoek' || p.buitenMateriaal === 'cementplaat';
+        const detail = op.fill ? KozijnModel.viewLines(op, op.fill, exterior).map(pl => pl.map(q => toWorld(p, x0 + q.x, op.y + q.y, zOut))) : [];
+        faces.push({ kind: 'opening', pts: [[x0, ya], [x1, ya], [x1, ybR], [x0, ybL]].map(([lx, ly]) => toWorld(p, lx, ly, zOut)), n, color, bias: 2, window: true, detail });
       });
     };
     parts.units.forEach(u => u.walls.forEach(w => w.pieces.forEach(p => addWall(p, 0))));
@@ -278,11 +294,11 @@ window.HousePdf = (() => {
         let nx = uy * vz - uz * vy, ny = uz * vx - ux * vz, nz = ux * vy - uy * vx;
         if (ny < 0) { nx = -nx; ny = -ny; nz = -nz; }
         const len = Math.hypot(nx, ny, nz) || 1;
-        faces.push({ pts, n: { x: nx / len, z: nz / len }, roof: true, color: cov.color || '#2a2a2a', bias: 0 });
+        faces.push({ kind: 'dak', pts, n: { x: nx / len, z: nz / len }, roof: true, color: cov.color || '#2a2a2a', bias: 0 });
       };
       RoofModel.capRegions(r.unitRoof).forEach(rg => {
         pushRoof(rg.poly.map(pt => {
-          const x = u.rect.cx + (sh.axis === 'x' ? pt.x : pt.z), z = u.rect.cz + (sh.axis === 'x' ? pt.z : pt.x);
+          const ax = r.unitRoof.alongX, x = u.rect.cx + (ax ? pt.x : pt.z), z = u.rect.cz + (ax ? pt.z : pt.x);
           return { x, y: u.layout.floorTop + rg.under(pt) + rg.vThick, z };
         }));
       });
@@ -299,10 +315,9 @@ window.HousePdf = (() => {
 
     const edge = parts.roofEdge;
     if (edge) {
-      const fc = (RoofModel.FASCIA_COLORS[edge.fasciaColor] || RoofModel.FASCIA_COLORS.antraciet).hex;
       const lerp = (a, b, t) => ({ x: a.x + (b.x - a.x) * t, z: a.z + (b.z - a.z) * t });
       edge.segments.forEach(sg => {
-        const h = sg.fascia ? edge.fasciaHeight : edge.trimHeight + edge.edgeAbove;
+        const h = RoofModel.edgeHeight(edge, sg);
         const n = Math.max(1, Math.ceil(Math.hypot(sg.outerB.x - sg.outerA.x, sg.outerB.z - sg.outerA.z) / 100));
         const top = [], bottom = [];
         for (let k = 0; k <= n; k++) {
@@ -311,9 +326,20 @@ window.HousePdf = (() => {
           top.push({ x: O.x, y: Math.max(tI, tO), z: O.z });
           bottom.push({ x: O.x, y: Math.min(tI, tO) - h, z: O.z });
         }
-        faces.push({ pts: top.concat(bottom.reverse()), n: { x: sg.normal.x, z: sg.normal.z }, color: sg.fascia ? fc : 0xb8bcc0, bias: 3 });
+        faces.push({ kind: 'dakrand', pts: top.concat(bottom.reverse()), n: { x: sg.normal.x, z: sg.normal.z }, color: RoofModel.edgeColor(edge, sg), bias: 3 });
       });
     }
+    (parts.chimneys || []).forEach(ch => {
+      const S = ChimneyModel.SIDES[ch.side];
+      const W = (t, s, y) => S.axis === 'z' ? { x: ch.plane + S.n.x * s, y, z: t } : { x: t, y, z: ch.plane + S.n.z * s };
+      const color = ch.outside.type === 'steen' ? (WallModel.STONE_COLORS[ch.outside.stone] || '#8a6a5c') : WallModel.stucHex(ch.outside.stuc);
+      const tN = S.axis === 'z' ? { x: 0, z: 1 } : { x: 1, z: 0 };
+      const side = (a, b, ya, n) => faces.push({ kind: 'schoorsteen', pts: [W(a.t, a.s, ya), W(b.t, b.s, ya), W(b.t, b.s, ch.yTop), W(a.t, a.s, ch.yTop)], n, color, bias: 4 });
+      side({ t: ch.t0, s: ch.sFront }, { t: ch.t1, s: ch.sFront }, ch.yGround, S.n);
+      side({ t: ch.t0, s: ch.sIn }, { t: ch.t0, s: ch.sFront }, ch.yGround, { x: -tN.x, z: -tN.z });
+      side({ t: ch.t1, s: ch.sIn }, { t: ch.t1, s: ch.sFront }, ch.yGround, tN);
+      side({ t: ch.t0, s: ch.sIn }, { t: ch.t1, s: ch.sIn }, ch.yUnder, { x: -S.n.x, z: -S.n.z });
+    });
     return faces;
   }
 
@@ -327,13 +353,15 @@ window.HousePdf = (() => {
       UnitModel.normalizeSplits(u.unit.walls[side].splits).filter(sp => sp.facade).forEach(sp => facades.push(HouseModel.facadeFor(state, u, side, sp.facade)));
     }));
     facades.forEach(fc => {
-      const key = fc.type === 'steen' ? 'steen:' + fc.stone : fc.type === 'stuc' ? 'stuc:' + fc.stuc : 'rabat';
+      const key = fc.type === 'steen' ? 'steen:' + fc.stone : fc.type === 'stuc' ? 'stuc:' + fc.stuc : fc.type === 'fels' ? 'fels:' + fc.fels : 'rabat';
       if (seen.has(key)) return;
       seen.add(key);
       items.push(fc.type === 'steen'
         ? { label: 'Gevel', value: `Steen ${fc.stone}`, thumb: WallModel.stoneThumbUrl(fc.stone, 64), color: WallModel.STONE_COLORS[fc.stone] }
         : fc.type === 'stuc'
           ? { label: 'Gevel', value: `Stucwerk ${((WallModel.STUC_COLORS[fc.stuc] || {}).label || '').toLowerCase()}`, color: WallModel.stucHex(fc.stuc) }
+          : fc.type === 'fels'
+            ? { label: 'Gevel', value: `Felsplaten ${((WallModel.FELS.COLORS[fc.fels] || {}).label || '').toLowerCase()} (staande naad)`, color: WallModel.felsHex(fc.fels) }
             : { label: 'Gevel', value: `Rabat ${((WallModel.RABAT_COLORS[st.facade.rabatColor] || {}).label || '').toLowerCase()} (${(WallModel.CLADDING_DIRECTIONS[st.cladding] || st.cladding).toLowerCase()})`, color: WallModel.rabatHex(st.facade.rabatColor) });
     });
     if (st.trasraam.enabled) {
@@ -412,8 +440,8 @@ window.HousePdf = (() => {
     });
   }
 
-  function drawViewsSheet(doc, parts, state, sheetOpts) {
-    const { BLACK } = PdfSheet.COLORS;
+  // Per gevel de zichtbare vlakken in (u, hoogte), van achter naar voor.
+  function viewProjections(parts, state) {
     const faces = viewFaces(parts, state);
     const groundY = Math.max(...parts.units.map(u => u.layout.floorTop)) - (state.settings.groundLevel || 0);
     const views = VIEWS.map(v => {
@@ -424,6 +452,12 @@ window.HousePdf = (() => {
       const us = list.flatMap(l => l.pts.map(p => p.u)), vs = list.flatMap(l => l.pts.map(p => p.v)).concat([groundY]);
       return { v, list, u0: Math.min(...us), u1: Math.max(...us), v0: Math.min(...vs), v1: Math.max(...vs) };
     }).filter(x => x.list.length);
+    return { groundY, views };
+  }
+
+  function drawViewsSheet(doc, parts, state, sheetOpts) {
+    const { BLACK } = PdfSheet.COLORS;
+    const { groundY, views } = viewProjections(parts, state);
 
     const X0 = 12, X1 = 408, Y0 = 14, Y1 = 248, gap = 10, titleH = 7;
     const cellW = (X1 - X0 - gap) / 2, cellH = (Y1 - Y0 - gap) / 2;
@@ -457,7 +491,7 @@ window.HousePdf = (() => {
     PdfSheet.titleBlock(doc, sheetOpts.project, sheetOpts);
   }
 
-  const CAP_KINDS = { spoor: 'Spoor', hoekkeper: 'Hoekkeper', nokbalk: 'Nokbalk', kopbalk: 'Kopbalk' };
+  const CAP_KINDS = { spoor: 'Spoor', hoekkeper: 'Hoekkeper', kilkeper: 'Kilkeper', nokbalk: 'Nokbalk', knikbalk: 'Knikbalk', kopbalk: 'Kopbalk' };
   function drawCapSheet(doc, u, sheetOpts) {
     const { RED, BLUE, BLACK, GREY } = PdfSheet.COLORS;
     const ur = u.roof.unitRoof, c = ur.cap;
@@ -474,7 +508,8 @@ window.HousePdf = (() => {
     };
     doc.setTextColor(...BLACK);
     doc.setFontSize(11);
-    doc.text('Bovenaanzicht bovenste deel (wolfseinden en nok)', X0, 20);
+    const join = c.kind === 'join';
+    doc.text(join ? 'Bovenaanzicht dak (aansluiting: kil- en hoekkepers, kreupele sporen)' : 'Bovenaanzicht bovenste deel (wolfseinden en nok)', X0, 20);
     doc.setDrawColor(...GREY);
     doc.setLineWidth(0.15);
     c.regions.forEach(rg => poly(rg.poly.map(xz), 'S'));
@@ -505,17 +540,22 @@ window.HousePdf = (() => {
     const H = (p) => RoofModel.profileHeight(ur.shape.profile, p);
     const deg = (t) => String(Math.round(Math.atan(t) * 1800 / Math.PI) / 10).replace('.', ',');
     const hip = c.regions.find(rg => rg.key === 'h1');
-    const facts = [
+    const facts = (join ? [
+      ['Goot (onderkant dak)', `${Math.round(c.eave)} mm`],
+      ['Nok (onderkant dak)', `${Math.round(c.ridgeH)} mm`],
+      ['Helling dakvlakken', `${deg(c.slope)}°`]
+    ] : [
       ['Wolfseind (onderkant dak)', `${Math.round(c.hipH)} mm`],
       ['Nok (onderkant dak)', `${Math.round(H(c.pR))} mm`],
       ['Helling dakvlakken', `${deg(c.slope)}°`],
-      ['Helling wolfseinden', hip ? `${deg(Math.tan(Math.acos(hip.cos)))}°` : '-'],
+      ['Helling wolfseinden', hip ? `${deg(Math.tan(Math.acos(hip.cos)))}°` : '-']
+    ]).concat([
       ['Balken', `${c.joistW} x ${c.joistH} mm`],
       ['Oppervlak (schuin)', `${fmt(c.specs.osbAreaM2, 2)} m²`],
       ['Hout', `${fmt(c.specs.joistWoodM3, 3)} m³`]
-    ];
+    ]);
     doc.setTextColor(...BLACK);
-    let y = PdfSheet.table(doc, 290, 20, [0, 52], ['Gegeven', 'Waarde'], facts, { title: 'Wolfsdak, bovenste deel', fontSize: 7, rowH: 4.6, lastColW: 40 });
+    let y = PdfSheet.table(doc, 290, 20, [0, 52], ['Gegeven', 'Waarde'], facts, { title: join ? 'Dak met aansluiting' : 'Wolfsdak, bovenste deel', fontSize: 7, rowH: 4.6, lastColW: 40 });
     PdfSheet.table(doc, 290, y + 6, [0, 32, 56, 78], ['Soort', 'Lengte (mm)', 'Hoek (°)', 'Aantal'], rows, { title: 'Stuklijst balken', fontSize: 7, rowH: 4.6, lastColW: 14, maxY: 240 });
     doc.setFontSize(7);
     doc.setTextColor(...GREY);
@@ -579,6 +619,10 @@ window.HousePdf = (() => {
       rows.push(['Boeideel-spots', e.spots + ' stuks']);
       rows.push(['Gevellampen', `${L.total} stuks (boven+onder ${L.both}, onder ${L.down}, boven ${L.up})`]);
       rows.push(['Binnenspots', `${L.indoor} stuks (plafond)`]);
+      if (totals.posts) {
+        const pp = totals.posts;
+        rows.push(['Palen overkapping', `${pp.count} stuks ${pp.wood.toLowerCase()} ${pp.size}x${pp.size} mm, ${fmt(pp.lengthM, 2)} m, ${fmt(pp.m3, 3)} m3, op paalvoeten`]);
+      }
       PdfSheet.table(doc, 120, y, [0, 40], ['Onderdeel', 'Hoeveelheid'], rows, tableOpts('Dakrand & verlichting'));
     }
 
@@ -722,7 +766,8 @@ window.HousePdf = (() => {
 
   function generate(state) {
     const parts = HouseModel.computeParts(state, {
-      wallMaterials: WallModel.createMaterials(), floorMaterials: FloorModel.createMaterials(), roofMaterials: RoofModel.createMaterials()
+      wallMaterials: WallModel.createMaterials(), floorMaterials: FloorModel.createMaterials(), roofMaterials: RoofModel.createMaterials(),
+      elektraRough: false
     });
     const totals = HouseModel.computeTotals(parts);
     const sheets = sheetList(parts);
@@ -763,5 +808,5 @@ window.HousePdf = (() => {
     return doc;
   }
 
-  return { generate, sheetList, materialThumbUrls, viewFaces, VIEWS };
+  return { generate, sheetList, materialThumbUrls, viewFaces, viewProjections, VIEWS };
 })();

js/interior/fixture-model.js

@@ -162,8 +162,8 @@ window.FixtureModel = (() => {
     },
     keuken: {
       label: 'Keukenblok', cat: 'keuken', w: 2660, d: 600, h: 910, resize: ['w', 'd', 'h'], minW: 600, wall: true, cost: 'keuken',
-      opts: { front: 'antraciet', spoelbak: 0.6, hogeKast: 'links', vaatwasser: true, bovenkasten: false },
-      hint: 'Onderkasten met werkblad en spoelbak (plek: 0 = links, 1 = rechts, van voren gezien); hoge kast 600 mm met inbouwkoelkast en oven',
+      opts: { front: 'antraciet', spoel: true, spoelbak: 0.6, kookplaat: false, kookplaatPlek: 0.2, hogeKast: 'links', vaatwasser: true, bovenkasten: false },
+      hint: 'Onderkasten met werkblad, spoelbak en eventueel kookplaat (plek: 0 = links, 1 = rechts, van voren gezien); hoge kast 600 mm met inbouwkoelkast en oven',
       build(f, g) { kitchenRun(g, f, false); },
       plan(f) { return kitchenPlan(f, false); }
     },
@@ -386,25 +386,32 @@ window.FixtureModel = (() => {
       boxAt(g, front, a + 2, b - 2, 1790, 2195, zf - 22, zf - 2);
     }
     if (!island) {
-      // Spoelbak + kraan
+      if (f.opts.spoel !== false) {
         const sx = spoelX(f, K);
         boxAt(g, MAT.chroom(), sx - 380, sx + 380, top - 2, top + 0.5, zb + 90, zf - 70);
         boxAt(g, MAT.rubber(), sx - 360, sx + 360, top - 1, top + 1, zb + 105, zf - 85);
         ecyl(g, MAT.zwartMetaal(), sx + 200, zb + 55, 22, 22, top, top + 300);
         boxAt(g, MAT.zwartMetaal(), sx + 190, sx + 210, top + 280, top + 300, zb + 55, zb + 280);
+      }
       if (f.opts.bovenkasten) boxAt(g, front, K.x0, K.x1, 1450, 2150, zb, zb + 350);
-    } else if (f.opts.kookplaat) {
-      const hw = Math.min(780, K.x1 - K.x0 - 100), hd = Math.min(520, f.d - 80);
-      boxAt(g, MAT.kookplaat(), -hw / 2, hw / 2, top, top + 4, -hd / 2, hd / 2);
-      hobZones(hw, hd).forEach(z => ecyl(g, MAT.ring(), z.x, z.z, z.r, z.r, top + 4, top + 5));
+    }
+    if (f.opts.kookplaat) {
+      const { hx, hw, hd } = hobOf(f, K, island);
+      boxAt(g, MAT.kookplaat(), hx - hw / 2, hx + hw / 2, top, top + 4, -hd / 2, hd / 2);
+      hobZones(hw, hd).forEach(z => ecyl(g, MAT.ring(), hx + z.x, z.z, z.r, z.r, top + 4, top + 5));
     }
   }
   const hobZones = (hw, hd) => [[-0.25, -0.25, 0.19], [0.25, -0.25, 0.14], [-0.25, 0.25, 0.14], [0.25, 0.25, 0.19]]
     .map(([a, b, r]) => ({ x: a * hw, z: b * hd, r: r * Math.min(hw, hd * 1.4) }));
-  function spoelX(f, K) {
-    const t = Math.max(0, Math.min(1, f.opts.spoelbak === undefined ? 0.6 : f.opts.spoelbak));
+  function plekX(K, v, def) {
+    const t = Math.max(0, Math.min(1, v === undefined ? def : v));
     return Math.max(K.x0 + 400, Math.min(K.x1 - 400, K.x0 + t * (K.x1 - K.x0)));
   }
+  const spoelX = (f, K) => plekX(K, f.opts.spoelbak, 0.6);
+  // Kookeiland: kookplaat in het midden; keukenblok: op kookplaatPlek.
+  const hobOf = (f, K, island) => ({
+    hx: island ? 0 : plekX(K, f.opts.kookplaatPlek, 0.2), hw: Math.min(780, K.x1 - K.x0 - 100), hd: Math.min(520, f.d - 80)
+  });
   function kitchenPlan(f, island) {
     const zb = -f.d / 2, zf = f.d / 2, K = kitchenModules(f, island), out = [];
     out.push(rectP(K.x0, K.x1, zb, zf));
@@ -413,13 +420,14 @@ window.FixtureModel = (() => {
       const a = K.tall === 'links' ? -f.w / 2 : f.w / 2 - 600;
       out.push(rectP(a, a + 600, zb, zf), lineP(a, zb, a + 600, zf, 'thin'), lineP(a, zf, a + 600, zb, 'thin'));
     }
-    if (!island) {
+    if (!island && f.opts.spoel !== false) {
       const sx = spoelX(f, K);
       out.push(rrectP(sx - 360, sx + 360, zb + 105, zf - 85, 40, 'thin'), circP(sx + 200, zb + 55, 22, 'thin'));
-    } else if (f.opts.kookplaat) {
-      const hw = Math.min(780, K.x1 - K.x0 - 100), hd = Math.min(520, f.d - 80);
-      out.push(rectP(-hw / 2, hw / 2, -hd / 2, hd / 2, 'thin'));
-      hobZones(hw, hd).forEach(z => out.push(circP(z.x, z.z, z.r, 'thin')));
+    }
+    if (f.opts.kookplaat) {
+      const { hx, hw, hd } = hobOf(f, K, island);
+      out.push(rectP(hx - hw / 2, hx + hw / 2, -hd / 2, hd / 2, 'thin'));
+      hobZones(hw, hd).forEach(z => out.push(circP(hx + z.x, z.z, z.r, 'thin')));
     }
     return out;
   }

js/lighting/lighting-model.js

@@ -10,7 +10,7 @@ window.LightingModel = (() => {
     mode: 'spots',
     direction: 'both',
     lampHeight: 1950,
-    lampMin: 1500,
+    lampMin: 500,
     lampMax: 3000,
     minWallWidth: 2000,
     endOffset: 300,
@@ -39,14 +39,16 @@ window.LightingModel = (() => {
     calculateSegmentPositions(len, min, max).forEach(p => out.push({ x: A.x + (B.x - A.x) * p / len, z: A.z + (B.z - A.z) * p / len }));
   }
 
-  function enforceMinSpacing(positions, min) {
+  // Te dicht bij elkaar: samen naar het midden, tenzij daar een opening zit (dan vervalt de tweede).
+  function enforceMinSpacing(positions, min, blockedAt) {
     let pts = positions.slice().sort((a, b) => a - b);
     let changed = true;
     while (changed && pts.length > 1) {
       changed = false;
       for (let i = 0; i < pts.length - 1; i++) {
         if (pts[i + 1] - pts[i] < min - 0.5) {
-          pts.splice(i, 2, (pts[i] + pts[i + 1]) / 2);
+          const mid = (pts[i] + pts[i + 1]) / 2;
+          pts.splice(i, 2, blockedAt && blockedAt(mid) ? pts[i] : mid);
           changed = true;
           break;
         }
@@ -55,6 +57,27 @@ window.LightingModel = (() => {
     return pts;
   }
 
+  // Naast openingen: op openingOffset van elke opening; is de tussenruimte daarvoor te klein, dan één lamp in
+  // het midden ervan (of geen, als die tegen de kozijnen zou hangen). Posities in u (mm vanaf de linkerkant).
+  function besideOpenings(cfg, s) {
+    const W = cfg.wallWidth, off = s.openingOffset, clear = cfg.studWidth + 150;
+    const ops = cfg.openings.map(op => [op.x, op.x + op.w]).sort((p, q) => p[0] - q[0]);
+    const out = [];
+    ops.forEach(([x0, x1], i) => {
+      const next = ops[i + 1];
+      if (i === 0) { const u = Math.max(x0 - off, s.endOffset); if (x0 - u >= clear) out.push(u); }
+      if (next) {
+        const gap = next[0] - x1;
+        if (gap >= 2 * off + 1000) out.push(x1 + off, next[0] - off);
+        else if (gap >= 2 * clear) out.push((x1 + next[0]) / 2);
+      } else {
+        const u = Math.min(x1 + off, W - s.endOffset);
+        if (u - x1 >= clear) out.push(u);
+      }
+    });
+    return out;
+  }
+
   function freeIntervals(lo, hi, blocked) {
     const free = [];
     let cursor = lo;
@@ -113,7 +136,7 @@ window.LightingModel = (() => {
     };
     if (s.mode === 'gevel') {
       runs.forEach(run => {
-        const blocked = [];
+        const blocked = [], openings = [];
         const pos = [];
         // Delen achter een andere wand (bijv. een stuk dat de naad in loopt) zijn geen zichtbare gevel.
         segs.filter(o => !run.segs.includes(o)).forEach(o => {
@@ -126,26 +149,29 @@ window.LightingModel = (() => {
           const cfg = sg.piece.config, sW = cfg.studWidth;
           const low = Math.min(cfg.wallHeightLeft, cfg.wallHeightRight) < H + 100;
           if (sg.override === 'geen' || low) { blocked.push([sg.s0, sg.s1]); return; }
-          if (sg.override === 'openingen') {
-            blocked.push([sg.s0, sg.s1]);
-            cfg.openings.forEach(op => [op.x - s.openingOffset, op.x + op.w + s.openingOffset]
-              .filter(u => u >= 0 && u <= cfg.wallWidth).forEach(u => pos.push(uToS(sg, u))));
-            return;
-          }
+          const own = [];
           cfg.openings.filter(op => op.y - sW <= H && WallModel.openingTopMax(op) + sW >= H).forEach(op => {
             const a = uToS(sg, op.x - sW), b = uToS(sg, op.x + op.w + sW);
-            blocked.push([Math.min(a, b), Math.max(a, b)]);
+            own.push([Math.min(a, b), Math.max(a, b)]);
           });
+          openings.push(...own);
+          if (sg.override === 'openingen') {
+            blocked.push([sg.s0, sg.s1]);
+            besideOpenings(cfg, s).forEach(u => pos.push(uToS(sg, u)));
+            return;
+          }
+          blocked.push(...own);
         });
+        // Automatisch: per vrij wandstuk gelijk verdeeld, midden in gelijke delen van ca. lampMax (één lamp
+        // midden tussen twee ramen), niet tegen de kozijnen of de hoek aan.
         freeIntervals(run.s0, run.s1, blocked).forEach(([a, b]) => {
           if (b - a < s.minWallWidth) return;
-          const first = a + s.endOffset, last = b - s.endOffset;
-          pos.push(first);
-          calculateSegmentPositions(last - first, s.lampMin, s.lampMax).forEach(p => pos.push(first + p));
-          pos.push(last);
+          const k = Math.max(1, Math.round((b - a) / s.lampMax));
+          for (let i = 0; i < k; i++) pos.push(a + (b - a) * (i + 0.5) / k);
         });
         // Min. h.o.h. geldt over alle lampen van de gevel samen (ook overrides en de grens tussen wanden).
-        enforceMinSpacing(pos, s.lampMin).forEach(v => addLamp(run, v));
+        const inOpening = (v) => openings.some(([a, b]) => v > a && v < b);
+        enforceMinSpacing(pos, s.lampMin, inOpening).filter(v => !inOpening(v)).forEach(v => addLamp(run, v));
       });
       units.forEach(u => u.walls.forEach(w => w.pieces.forEach(p => p.lamps.sort((a, b) => a.u - b.u))));
     }
@@ -298,32 +324,41 @@ window.LightingModel = (() => {
   const OUTDOOR = { lamp: 1.1, spot: 0.9, angle: 0.62, penumbra: 0.85 };
   const INDOOR = { intensity: 1.4, angle: 1.3, penumbra: 0.9, reach: 1.12, decay: 1.0 };
   const DAY_OUTDOOR_FACTOR = 0.35;
-  function buildLights3D(lamps, spots, spotY, indoor, o) {
-    const toM = 0.001;
-    const fo = (o && o.outdoorFactor !== undefined) ? o.outdoorFactor : 1;
-    const group = new THREE.Group();
-    const add = (x, y, z, tx, ty, tz, intensity, angle, distance, decay, penumbra, ref) => {
-      const light = new THREE.SpotLight(0xffd9a0, intensity, distance, angle, penumbra, decay);
-      light.userData.ref = ref;
-      light.position.set(x, y, z);
-      light.target.position.set(x + tx, y + ty, z + tz);
-      group.add(light);
-      group.add(light.target);
+  // Lichtbronnen in meters: positie, richting (genormaliseerd), halve kegelhoek; gedeeld door 3D en render-export.
+  function lightSources(lamps, spots, spotY, indoor) {
+    const toM = 0.001, out = [];
+    const add = (kind, x, y, z, tx, ty, tz, intensity, angle, distance, decay, penumbra, ref) => {
+      const len = Math.hypot(tx, ty, tz) || 1;
+      out.push({ kind, x, y, z, dir: { x: tx / len, y: ty / len, z: tz / len }, intensity, angle, distance, decay, penumbra, ref });
     };
     const tilt = Math.tan(OUTDOOR.angle);
     lamps.forEach(l => {
       const x = l.x * toM + l.normal.x * 0.12, z = l.z * toM + l.normal.z * 0.12, y = l.y * toM;
       const nx = l.normal.x * tilt, nz = l.normal.z * tilt;
-      if (l.direction !== 'up') add(x, y - 0.09, z, nx, -1, nz, OUTDOOR.lamp * fo, OUTDOOR.angle, 4.5, 1.5, OUTDOOR.penumbra, l);
-      if (l.direction !== 'down') add(x, y + 0.09, z, nx, 1, nz, OUTDOOR.lamp * fo, OUTDOOR.angle, 4.5, 1.5, OUTDOOR.penumbra, l);
+      if (l.direction !== 'up') add('wandlamp', x, y - 0.09, z, nx, -1, nz, OUTDOOR.lamp, OUTDOOR.angle, 4.5, 1.5, OUTDOOR.penumbra, l);
+      if (l.direction !== 'down') add('wandlamp', x, y + 0.09, z, nx, 1, nz, OUTDOOR.lamp, OUTDOOR.angle, 4.5, 1.5, OUTDOOR.penumbra, l);
     });
     (spots || []).forEach(p => {
       const n = p.normal || { x: 0, z: 0 }, len = Math.hypot(n.x, n.z) || 1;
-      add(p.x * toM, (p.y !== undefined ? p.y : spotY) * toM - 0.02, p.z * toM, n.x / len * tilt, -1, n.z / len * tilt, OUTDOOR.spot * fo, OUTDOOR.angle, 5.5, 1.5, OUTDOOR.penumbra, p);
+      add('dakrandspot', p.x * toM, (p.y !== undefined ? p.y : spotY) * toM - 0.02, p.z * toM, n.x / len * tilt, -1, n.z / len * tilt, OUTDOOR.spot, OUTDOOR.angle, 5.5, 1.5, OUTDOOR.penumbra, p);
     });
     (indoor || []).forEach(p => {
       const drop = (p.y - p.floorY) * toM;
-      add(p.x * toM, p.y * toM - 0.02, p.z * toM, 0, -1, 0, INDOOR.intensity, INDOOR.angle, drop * INDOOR.reach, INDOOR.decay, INDOOR.penumbra, p);
+      add('binnenspot', p.x * toM, p.y * toM - 0.02, p.z * toM, 0, -1, 0, INDOOR.intensity, INDOOR.angle, drop * INDOOR.reach, INDOOR.decay, INDOOR.penumbra, p);
+    });
+    return out;
+  }
+
+  function buildLights3D(lamps, spots, spotY, indoor, o) {
+    const fo = (o && o.outdoorFactor !== undefined) ? o.outdoorFactor : 1;
+    const group = new THREE.Group();
+    lightSources(lamps, spots, spotY, indoor).forEach(s => {
+      const light = new THREE.SpotLight(0xffd9a0, s.kind === 'binnenspot' ? s.intensity : s.intensity * fo, s.distance, s.angle, s.penumbra, s.decay);
+      light.userData.ref = s.ref;
+      light.position.set(s.x, s.y, s.z);
+      light.target.position.set(s.x + s.dir.x, s.y + s.dir.y, s.z + s.dir.z);
+      group.add(light);
+      group.add(light.target);
     });
     if (o && o.walls) group.add(buildWash3D(lamps, spots, spotY, o.walls, o.groundY || 0, fo));
     return group;
@@ -424,5 +459,5 @@ window.LightingModel = (() => {
     return group;
   }
 
-  return { DEFAULT_SETTINGS, MODES, DIRECTIONS, WALL_OVERRIDES, createDefaultUnitLighting, DAY_OUTDOOR_FACTOR, normalizeSettings, compute, computeIndoor, roomSpots, applySwitches, unitInnerRect, freeIntervals, createMaterials, build3D, buildLights3D };
+  return { DEFAULT_SETTINGS, MODES, DIRECTIONS, WALL_OVERRIDES, createDefaultUnitLighting, DAY_OUTDOOR_FACTOR, normalizeSettings, compute, computeIndoor, roomSpots, applySwitches, unitInnerRect, freeIntervals, createMaterials, build3D, lightSources, buildLights3D };
 })();

js/roof/post-model.js

@@ -0,0 +1,217 @@
+/*!
+ * Tectum
+ * Copyright © 2026 Machiel Heinen.
+ * Alle rechten voorbehouden. Gebruik uitsluitend met schriftelijke toestemming.
+ * Zie LICENTIE.md.
+ */
+// Palen onder een overkapping: steekt een dak minstens minExt buiten de vloeren uit (veranda), dan komen er
+// palen onder de dakrand. Hoekpalen staan met hun buitenkant gelijk met de dakhoek; een eind dat op een gevel
+// uitkomt rust op die wand. Daartussen zo weinig palen dat de h.o.h.-afstand onder maxSpan blijft.
+// sideWall: een vrije hoek krijgt geen paal maar een dichte zijwand (gestuukt) van de dakhoek terug tot de gevel,
+// met de buitenkant gelijk met de zijkant van het dak. Ligt die buitenkant in het vlak van een gevel, dan loopt de
+// bekleding van die gevel erover door (outsideOf, bijv. felsplaten) en staat de wand gelijk met de bekleding.
+
+window.PostModel = (() => {
+  const EPS = 0.5;
+  const SHOE_MM = 100;              // verzinkte paalvoet tussen maaiveld en paal
+  const WOODS = {
+    eiken: { label: 'Eiken', hex: 0xa07c54, kgM3: 750 },
+    douglas: { label: 'Douglas', hex: 0xb98a5e, kgM3: 530 }
+  };
+  const DEFAULT_SETTINGS = { enabled: true, size: 200, wood: 'eiken', maxSpan: 3600, minExt: 1000, sideWall: false, sideColor: 'wit' };
+  const SIDE_MM = 200;              // dikte zijwand (regelwerk, plaat en stuc aan beide kanten)
+  const SIDE_TOP_BELOW_MM = 40;     // doorlopende gevelbekleding: tot zo ver onder de bovenkant van het dak
+
+  function normalizeSettings(settings) {
+    const s = Object.assign({}, DEFAULT_SETTINGS, settings || {});
+    s.enabled = s.enabled !== false;
+    s.sideWall = !!s.sideWall;
+    if (!WOODS[s.wood]) s.wood = DEFAULT_SETTINGS.wood;
+    if (!WallModel.isStucColor(s.sideColor)) s.sideColor = DEFAULT_SETTINGS.sideColor;
+    const num = (v, def, min, max) => (isFinite(v) ? Math.min(max, Math.max(min, Math.round(v))) : def);
+    s.size = num(s.size, DEFAULT_SETTINGS.size, 100, 400);
+    s.maxSpan = num(s.maxSpan, DEFAULT_SETTINGS.maxSpan, 1000, 8000);
+    s.minExt = num(s.minExt, DEFAULT_SETTINGS.minExt, 400, 5000);
+    return s;
+  }
+
+  // units: [{ rect (vloer), roof: { rect, ceilingAt } }] in wereld-mm; groundY = maaiveld (absoluut).
+  // outsideOf(wall, out): { finish, kind, depth } van de gevel in het vlak van de buitenkant, of null.
+  function compute(settings, units, groundY, outsideOf) {
+    const s = normalizeSettings(settings);
+    const out = { posts: [], count: 0, size: s.size, wood: s.wood, lengthMM: 0, m3: 0, kg: 0, walls: [], wallM2: 0, sideColor: s.sideColor };
+    if (!s.enabled || !units.length) return out;
+    const floors = units.map(u => u.rect);
+    const onFloor = (x, z, m) => floors.some(f => x > f.x0 - m && x < f.x1 + m && z > f.z0 - m && z < f.z1 + m);
+    const underRoof = (x, z) => units.some(u => { const r = u.roof.rect; return x > r.x0 && x < r.x1 && z > r.z0 && z < r.z1; });
+
+    // Vrije stukken dakrand: buitenrand van de daken samen, recht tegenover een gevel op minstens minExt (loodrecht
+    // op de rand gemeten); de zijkanten van een veranda krijgen alleen de hoekpalen. In een binnenhoek (veranda
+    // tussen twee units) loopt het stuk door tot de andere gevel en rust daar op.
+    const runs = [];
+    units.forEach(u => {
+      const R = u.roof.rect;
+      [
+        { axis: 'z', at: R.x1, n: 1, s0: R.z0, s1: R.z1 }, { axis: 'z', at: R.x0, n: -1, s0: R.z0, s1: R.z1 },
+        { axis: 'x', at: R.z1, n: 1, s0: R.x0, s1: R.x1 }, { axis: 'x', at: R.z0, n: -1, s0: R.x0, s1: R.x1 }
+      ].forEach(e => {
+        const pt = (t, d) => (e.axis === 'z' ? { x: e.at - e.n * d, z: t } : { x: t, z: e.at - e.n * d });
+        const facing = (p) => Math.min(...floors.map(f => {
+          const [lo, hi, c0, c1, v, c] = e.axis === 'z' ? [f.z0, f.z1, f.x0, f.x1, p.z, p.x] : [f.x0, f.x1, f.z0, f.z1, p.x, p.z];
+          if (!(v > lo + EPS && v < hi - EPS)) return Infinity;
+          const d = e.n > 0 ? c - c1 : c0 - c;
+          return d > -EPS ? d : Infinity;
+        }));
+        const free = (t) => {
+          const p = pt(t, 0), o = pt(t, -1), d = facing(p);
+          return !underRoof(o.x, o.z) && d >= s.minExt - EPS && d < Infinity;
+        };
+        const cuts = [e.s0, e.s1].concat(floors.flatMap(f => (e.axis === 'z' ? [f.z0, f.z1] : [f.x0, f.x1]))
+          .filter(t => t > e.s0 + EPS && t < e.s1 - EPS)).sort((a, b) => a - b);
+        for (let i = 0; i < cuts.length - 1; i++) {
+          const a = cuts[i], b = cuts[i + 1];
+          if (b - a < EPS || !free((a + b) / 2)) continue;
+          const last = runs[runs.length - 1];
+          if (last && last.axis === e.axis && last.n === e.n && Math.abs(last.at - e.at) < EPS && Math.abs(last.b - a) < EPS) last.b = b;
+          else runs.push({ axis: e.axis, at: e.at, n: e.n, a, b });
+        }
+      });
+    });
+    // Aansluitende stukken van verschillende units (bijv. twee units met dezelfde veranda) samenvoegen.
+    runs.sort((p, q) => p.axis.localeCompare(q.axis) || p.n - q.n || Math.round(p.at) - Math.round(q.at) || p.a - q.a);
+    const merged = [];
+    runs.forEach(r => {
+      const m = merged.find(o => o.axis === r.axis && o.n === r.n && Math.abs(o.at - r.at) < EPS && Math.abs(o.b - r.a) < EPS);
+      if (m) m.b = r.b; else merged.push(Object.assign({}, r));
+    });
+
+    const half = s.size / 2;
+    const pts = [];
+    const roofAt = (x, z) => units.map(u => u.roof).find(rf => x > rf.rect.x0 - EPS && x < rf.rect.x1 + EPS && z > rf.rect.z0 - EPS && z < rf.rect.z1 + EPS);
+    const endFreeOf = (r, t) => { const p = r.axis === 'z' ? { x: r.at, z: t } : { x: t, z: r.at }; return !onFloor(p.x, p.z, s.size); };
+    // Zijwand op het vrije eind t van run r (dir +1: wand van t de run in, -1: andersom), terug tot de gevel waar de
+    // run naar kijkt. Delen twee runs een vrije hoek (veranda in een binnenhoek), dan is de run met de kortste weg
+    // naar de gevel de voorkant en komt de wand langs de zijkant; het andere eind rust op die wand.
+    const sideCands = [];
+    if (s.sideWall) merged.forEach(r => [[r.a, 1], [r.b, -1]].forEach(([t, dir]) => {
+      if (!endFreeOf(r, t)) return;
+      const lo = Math.min(t, t + dir * SIDE_MM), hi = Math.max(t, t + dir * SIDE_MM);
+      let reach = Infinity;
+      floors.forEach(f => {
+        const [s0, s1, c0, c1] = r.axis === 'z' ? [f.z0, f.z1, f.x0, f.x1] : [f.x0, f.x1, f.z0, f.z1];
+        if (s0 > hi - EPS || s1 < lo + EPS) return;
+        const d = r.n > 0 ? r.at - c1 : c0 - r.at;
+        if (d > -EPS && d < reach) reach = d;
+      });
+      if (!isFinite(reach) || reach < s.size) return;
+      const a = Math.min(r.at, r.at - r.n * reach), b = Math.max(r.at, r.at - r.n * reach);
+      const corner = r.axis === 'z' ? { x: r.at, z: t } : { x: t, z: r.at };
+      const outward = r.axis === 'z' ? { x: 0, z: -dir } : { x: -dir, z: 0 };
+      sideCands.push({ r, t, corner, reach, out: outward, w: r.axis === 'z' ? { x0: a, x1: b, z0: lo, z1: hi } : { x0: lo, x1: hi, z0: a, z1: b } });
+    }));
+    const sameCorner = (p, q) => Math.abs(p.x - q.x) < EPS && Math.abs(p.z - q.z) < EPS;
+    const sideAt = (r, t) => { const c = sideCands.find(d => d.r === r && d.t === t); return !!c && sideCands.some(d => d.built && sameCorner(d.corner, c.corner)); };
+    sideCands.forEach(c => {
+      if (sideCands.some(d => d !== c && sameCorner(d.corner, c.corner) && (d.reach < c.reach - EPS || (Math.abs(d.reach - c.reach) < EPS && sideCands.indexOf(d) < sideCands.indexOf(c))))) return;
+      const w = c.w;
+      const tops = [[w.x0 + 1, w.z0 + 1], [w.x1 - 1, w.z0 + 1], [w.x0 + 1, w.z1 - 1], [w.x1 - 1, w.z1 - 1]]
+        .map(([x, z]) => { const rf = roofAt(x, z); return rf ? rf.ceilingAt(x, z) : null; }).filter(v => v !== null);
+      if (!tops.length || !(Math.max(...tops) > groundY)) return;
+      const wall = Object.assign({}, w, { y0: groundY, y1: Math.round(Math.max(...tops)), color: s.sideColor, out: c.out, outside: null });
+      const o = outsideOf ? outsideOf(wall, c.out) : null;
+      if (o) {
+        if (c.out.x > 0) wall.x1 += o.depth; else if (c.out.x < 0) wall.x0 -= o.depth;
+        if (c.out.z > 0) wall.z1 += o.depth; else if (c.out.z < 0) wall.z0 -= o.depth;
+        Object.assign(wall, { outside: o.finish, outsideKind: o.kind });
+        // Zoals de gevel: de bekleding loopt tot onder de dakrand door (over de kant van het dakpakket).
+        const roofTops = [[w.x0 + 1, w.z0 + 1], [w.x1 - 1, w.z0 + 1], [w.x0 + 1, w.z1 - 1], [w.x1 - 1, w.z1 - 1]]
+          .map(([x, z]) => { const rf = roofAt(x, z); return rf && rf.topAt ? rf.topAt(x, z) : null; }).filter(v => v !== null);
+        if (roofTops.length) wall.y1 = Math.max(wall.y1, Math.round(Math.min(...roofTops) - SIDE_TOP_BELOW_MM));
+      }
+      out.walls.push(wall);
+      c.built = true;
+    });
+    merged.forEach(r => {
+      const pos = (t) => (r.axis === 'z' ? { x: r.at - r.n * half, z: t } : { x: t, z: r.at - r.n * half });
+      // Een eind dat op of tegen een vloer uitkomt rust op die gevel.
+      const endFree = (t) => { const p = r.axis === 'z' ? { x: r.at, z: t } : { x: t, z: r.at }; return !onFloor(p.x, p.z, s.size); };
+      // Een dichte zijwand neemt de plaats van de hoekpaal in; het eind rust dan op die wand.
+      const fa = endFree(r.a) && !sideAt(r, r.a), fb = endFree(r.b) && !sideAt(r, r.b);
+      const pa = fa ? r.a + half : r.a, pb = fb ? r.b - half : r.b;
+      if (pb - pa < EPS) return;
+      const n = Math.max(1, Math.ceil((pb - pa) / s.maxSpan - 1e-9));
+      for (let k = 0; k <= n; k++) {
+        if ((k === 0 && !fa) || (k === n && !fb)) continue;
+        pts.push(pos(pa + (pb - pa) * k / n));
+      }
+    });
+    pts.forEach(p => {
+      if (out.posts.some(q => Math.abs(q.x - p.x) < s.size && Math.abs(q.z - p.z) < s.size)) return;
+      if (out.walls.some(w => p.x > w.x0 - half && p.x < w.x1 + half && p.z > w.z0 - half && p.z < w.z1 + half)) return;
+      const roof = roofAt(p.x, p.z);
+      if (!roof) return;
+      // Hoogste hoek: bij een hellend dak verdwijnt de paal aan de lage kant in het dakpakket, zonder kier.
+      const top = Math.max(...[[-1, -1], [1, -1], [-1, 1], [1, 1]].map(([a, b]) => roof.ceilingAt(p.x + a * (half - 1), p.z + b * (half - 1))));
+      if (!(top > groundY + SHOE_MM)) return;
+      out.posts.push({ x: Math.round(p.x), z: Math.round(p.z), y0: groundY, y1: Math.round(top), size: s.size });
+    });
+    out.count = out.posts.length;
+    out.lengthMM = out.posts.reduce((t, p) => t + p.y1 - p.y0 - SHOE_MM, 0);
+    out.m3 = out.lengthMM * s.size * s.size / 1e9;
+    out.kg = out.m3 * WOODS[s.wood].kgM3;
+    const wallArea = (w) => Math.max(w.x1 - w.x0, w.z1 - w.z0) * (w.y1 - w.y0) / 1e6;
+    out.wallM2 = out.walls.reduce((t, w) => t + wallArea(w), 0);
+    out.outsideM2 = {};
+    out.walls.filter(w => w.outsideKind).forEach(w => { out.outsideM2[w.outsideKind] = (out.outsideM2[w.outsideKind] || 0) + wallArea(w); });
+    return out;
+  }
+
+  function createMaterials() {
+    return {
+      wood: Object.fromEntries(Object.entries(WOODS).map(([k, w]) => [k, new THREE.MeshStandardMaterial({ color: w.hex, roughness: 0.78 })])),
+      shoe: new THREE.MeshStandardMaterial({ color: 0x9ba0a4, roughness: 0.45, metalness: 0.6 })
+    };
+  }
+
+  function build3D(data, materials) {
+    const toM = 0.001, group = new THREE.Group();
+    if (!data || !(data.posts.length || (data.walls || []).length)) return group;
+    const m = materials || createMaterials();
+    const woodMat = m.wood[data.wood] || m.wood.eiken;
+    data.posts.forEach(p => {
+      const h = p.y1 - p.y0 - SHOE_MM;
+      const post = new THREE.Mesh(new THREE.BoxGeometry(p.size * toM, h * toM, p.size * toM), woodMat);
+      post.position.set(p.x * toM, (p.y0 + SHOE_MM + h / 2) * toM, p.z * toM);
+      group.add(post);
+      const plate = new THREE.Mesh(new THREE.BoxGeometry((p.size + 40) * toM, 10 * toM, (p.size + 40) * toM), m.shoe);
+      plate.position.set(p.x * toM, (p.y0 + 5) * toM, p.z * toM);
+      group.add(plate);
+      const stem = new THREE.Mesh(new THREE.BoxGeometry(p.size * 0.35 * toM, (SHOE_MM - 10) * toM, p.size * 0.35 * toM), m.shoe);
+      stem.position.set(p.x * toM, (p.y0 + 10 + (SHOE_MM - 10) / 2) * toM, p.z * toM);
+      group.add(stem);
+    });
+    (data.walls || []).forEach(w => {
+      const c = [(w.x0 + w.x1) / 2 * toM, (w.y0 + w.y1) / 2 * toM, (w.z0 + w.z1) / 2 * toM];
+      const geo = new THREE.BoxGeometry((w.x1 - w.x0) * toM, (w.y1 - w.y0) * toM, (w.z1 - w.z0) * toM);
+      // UV in wereldmeters, zoals de gevels: texturen op dezelfde schaal.
+      const pos = geo.attributes.position, nrm = geo.attributes.normal, uv = geo.attributes.uv;
+      for (let k = 0; k < pos.count; k++) {
+        const x = pos.getX(k) + c[0], y = pos.getY(k) + c[1], z = pos.getZ(k) + c[2];
+        if (Math.abs(nrm.getX(k)) > 0.5) uv.setXY(k, z, y); else if (Math.abs(nrm.getY(k)) > 0.5) uv.setXY(k, x, z); else uv.setXY(k, x, y);
+      }
+      uv.needsUpdate = true;
+      // Volgorde van de vlakken in BoxGeometry: +x, -x, +y, -y, +z, -z.
+      const stuc = WallModel.stucMaterial(w.color), mats = [stuc, stuc, stuc, stuc, stuc, stuc];
+      const outMat = w.outside && w.out ? WallModel.claddingMaterial(w.outside) : null;
+      if (outMat) mats[w.out.x > 0 ? 0 : w.out.x < 0 ? 1 : w.out.z > 0 ? 4 : 5] = outMat;
+      const box = new THREE.Mesh(geo, mats);
+      box.position.set(...c);
+      box.castShadow = true;
+      box.receiveShadow = true;
+      group.add(box);
+    });
+    return group;
+  }
+
+  return { WOODS, SHOE_MM, SIDE_MM, DEFAULT_SETTINGS, normalizeSettings, compute, createMaterials, build3D };
+})();

js/roof/roof-model.js

@@ -12,6 +12,9 @@ window.RoofModel = (() => {
   const DENSITY_DAKLEER_KGM2 = 1.4;
   const TRIM_THICK_MM = 25;
   const EDGE_ABOVE_MM = 80;
+  // Felsplaat op dak én gevel: geen boeideel; de dakplaat zet om over de rand (net vóór de gevelbekleding), zonder
+  // opstand (de waterkant van een lessenaar), tot over de bovenkant van de gevelplaten.
+  const FELS_EDGE = { lipMM: 2, aboveMM: 2, heightMM: 120 };
   const SPOT_RATIO = 0.4;
   const OVERHANG_MIN = 200, OVERHANG_MAX = 400;
 
@@ -35,7 +38,9 @@ window.RoofModel = (() => {
   // Riet e.d. alleen bij een hellend dak; plat valt terug op dakleer.
   // Riet: één keuze per textuur assets/textures/dak/riet_<nr>.jpg (nummer hier toevoegen).
   const RIET = { thickMM: 180, kgM2: 3.8, tileMM: 1000, nrs: ['001', '002', '003'], colors: { '001': '#947d69', '002': '#7c4c3f', '003': '#735e43' } };
-  const FELS = { thickMM: 25, kgM2: 6.5, seamMM: 500, colors: { zink: ['Felsplaat zink', '#8e9497'], antraciet: ['Felsplaat antraciet', '#3d4146'], zwart: ['Felsplaat zwart', '#1f2022'] } };
+  // Kleuren en naadafstand gedeeld met felsplaten op de gevel (WallModel.FELS).
+  const FELS = { thickMM: 25, kgM2: 6.5, seamMM: WallModel.FELS.SEAM_MM,
+    colors: Object.fromEntries(Object.entries(WallModel.FELS.COLORS).map(([k, c]) => [k, ['Felsplaat ' + c.label.toLowerCase(), c.hex]])) };
   const COVERINGS = Object.assign({
     dakleer: { label: 'Dakleer (EPDM)', kind: 'dakleer', color: '#2a2a2a', thickMM: DAKLEER_MM, kgM2: DENSITY_DAKLEER_KGM2 }
   }, ...RIET.nrs.map(nr => ({
@@ -92,7 +97,7 @@ window.RoofModel = (() => {
     const deck = clone(floorState);
     deck.chassis = { enabled: false, wheelDiameter: 400, trackWidth: 1200, wheelbase: 1200 };
     deck.openings = [];
-    return { followFloor: true, offsetX: 0, offsetZ: 0, fascia: true, covering: 'dakleer', deck };
+    return { followFloor: true, offsetX: 0, offsetZ: 0, extend: { f: 0, r: 0, b: 0, l: 0 }, fascia: true, covering: 'dakleer', deck };
   }
 
   function thickness(calcData, covering) {
@@ -125,18 +130,8 @@ window.RoofModel = (() => {
     deck.position.y = deckH;
     group.add(deck);
 
-    const wM = calcData.width * toM, dM = calcData.depth * toM;
-    const shape = new THREE.Shape();
-    shape.moveTo(-wM / 2, -dM / 2);
-    shape.lineTo(wM / 2, -dM / 2);
-    shape.lineTo(wM / 2, dM / 2);
-    shape.lineTo(-wM / 2, dM / 2);
-    shape.closePath();
-    resolvedOpenings.filter(o => !o.removed && o.r > 0).forEach(o => {
-      const hole = new THREE.Path();
-      hole.absarc(o.x * toM, o.y * toM - dM / 2, o.r * toM, 0, Math.PI * 2, false);
-      shape.holes.push(hole);
-    });
+    const dM = calcData.depth * toM;
+    const shape = FloorModel.surfaceShapes(calcData, resolvedOpenings, toM);
     const cov = COVERINGS[opts.covering] || COVERINGS.dakleer;
     const covMat = coveringMaterial(opts.covering) || m.dakleerMaterial;
     const bT = BESCHOT_MM * toM;
@@ -212,7 +207,7 @@ window.RoofModel = (() => {
         return { type: 'wolf', axis, profile: [L, A, ridge, B, R], hip: { h: A.h } };
       }
     }
-    const type = profile.length === 2 ? 'lessenaar' : profile.length === 5 ? 'mansarde' : 'zadel';
+    const type = profile.length === 2 ? 'lessenaar' : 'zadel';
     return { type, axis, profile };
   }
 
@@ -267,8 +262,11 @@ window.RoofModel = (() => {
     finishKNm2: 0.3,        // afwerking/installaties onder het dak
     gammaG: 1.2, gammaQ: 1.5, deflection: 250
   };
-  const ridgeTypes = ['zadel', 'mansarde', 'wolf'];
-  function computeRidgeBeam(roofState, shape, rect, alongX, cd, kgM2) {
+  const ridgeTypes = ['zadel', 'wolf'];
+  // span: [q0, q1] waar de nok echt loopt (dakaansluiting: tot de hoekkeper).
+  // cuts: sparingen (schoorsteen) in plattegrondmaten; ligt er een op de nok, dan stopt de balk bear mm erin
+  // (negatief: ervoor).
+  function computeRidgeBeam(roofState, shape, rect, alongX, cd, kgM2, span, cuts) {
     if (roofState.steelRidge === false || !ridgeTypes.includes(shape.type)) return null;
     const pr = shape.profile, inner = pr.slice(1, -1);
     if (!inner.length) return null;
@@ -283,6 +281,13 @@ window.RoofModel = (() => {
       q0 = Math.max(uq0, Math.min(g.qM, g.q0 + g.inset));
       q1 = Math.min(uq1, Math.max(g.qM, g.q1 - g.inset));
     }
+    if (span) { q0 = Math.max(q0, span[0]); q1 = Math.min(q1, span[1]); }
+    (cuts || []).forEach(c => {
+      const [pa, pb] = alongX ? [c.x0, c.x1] : [c.z0, c.z1], [qa, qb] = alongX ? [c.z0, c.z1] : [c.x0, c.x1];
+      if (R.p < pa - 100 || R.p > pb + 100 || qb < q0 || qa > q1) return;
+      if ((qa + qb) / 2 > (q0 + q1) / 2) q1 = Math.min(q1, qa + (c.bear || 0));
+      else q0 = Math.max(q0, qb - (c.bear || 0));
+    });
     const L = q1 - q0;
     if (L < 100) return null;
     // q in N/mm = kN/m.
@@ -348,7 +353,9 @@ window.RoofModel = (() => {
     return out;
   }
 
-  function computeUnitRoof(roofState, shape, rect, rims) {
+  // cuts: rechthoekige sparingen (schoorsteen) in plattegrondmaten van de unit: { x0, x1, z0, z1, bear }.
+  function computeUnitRoof(roofState, shape, rect, rims, cutRects) {
+    const roofCuts = cutRects || [];
     const alongX = shape.axis === 'x';
     const W = rect.x1 - rect.x0, D = rect.z1 - rect.z0;
     const xc = (rect.x0 + rect.x1) / 2, zc = (rect.z0 + rect.z1) / 2;
@@ -370,10 +377,18 @@ window.RoofModel = (() => {
       const slopeLen = Math.hypot(run, h1 - h0), cos = run / slopeLen;
       const plane = { p0, p1, h0, h1, theta: Math.atan2(h1 - h0, run), cos, yaw: alongX ? Math.PI / 2 : 0 };
       let data;
-      if (cuts.length === 2 && !alongX && Math.abs(h1 - h0) < 0.5) {
+      const deckCuts = roofCuts.map(c => {
+        const [qa, qb] = alongX ? [c.x0, c.x1] : [c.z0, c.z1];
+        const a = Math.max(qa, p0), b = Math.min(qb, p1);
+        if (b - a < 1) return null;
+        const [x0, x1] = alongX ? [zc - c.z1, zc - c.z0] : [c.x0 - xc, c.x1 - xc];
+        return { x0, x1, y0: (a - p0) / cos, y1: (b - p0) / cos };
+      }).filter(Boolean);
+      if (cuts.length === 2 && !alongX && Math.abs(h1 - h0) < 0.5 && !deckCuts.length) {
         data = flat;
       } else {
         const deck = clone(roofState.deck);
+        deck.cuts = deckCuts;
         deck.floor.width = Math.round(alongX ? D : W);
         deck.floor.depth = Math.round(slopeLen);
         deck.openings = holes.filter(hl => hl.q >= p0 && (hl.q < p1 || last)).map(hl => ({
@@ -393,7 +408,7 @@ window.RoofModel = (() => {
       });
     });
 
-    // Mansardeknik: het steilere vlak is verticaal dikker, dus verstek: onderkant op de knik,
+    // Knik in de daklijn: het steilere vlak is verticaal dikker, dus verstek: onderkant op de knik,
     // bovenkant op het snijpunt van de bovenvlakken.
     planes.forEach((pl, i) => { pl.miter0 = 0; pl.miter1 = 0; });
     planes.slice(0, -1).forEach((pi, i) => {
@@ -417,12 +432,8 @@ window.RoofModel = (() => {
       topAt = (x, z) => Math.min(mainTop(x, z), ...cap.regions.map(rg => rg.under(at(x, z)) + rg.vThick));
     }
     const specs = sumSpecs(outPlanes.map(pl => pl.specs).concat(cap ? [cap.specs] : []));
-    const ridgeBeam = computeRidgeBeam(roofState, shape, rect, alongX, flat.calcData, specs.totalKg / Math.max(0.1, W * D / 1e6));
-    Object.assign(specs, {
-      nokStaalM: ridgeBeam ? ridgeBeam.length / 1000 : 0, nokStaalKg: ridgeBeam ? ridgeBeam.steelKg : 0,
-      nokVulhoutM3: ridgeBeam ? ridgeBeam.fillM3 : 0, nokVulhoutKg: ridgeBeam ? ridgeBeam.fillKg : 0
-    });
-    specs.totalKg += specs.nokStaalKg + specs.nokVulhoutKg;
+    const ridgeBeam = computeRidgeBeam(roofState, shape, rect, alongX, flat.calcData, specs.totalKg / Math.max(0.1, W * D / 1e6), null, roofCuts);
+    addRidgeSpecs(specs, ridgeBeam);
     return {
       shape, covering, planes: outPlanes, specs, ridgeBeam,
       undersideAt, topAt, cap, rect, alongX,
@@ -431,6 +442,200 @@ window.RoofModel = (() => {
     };
   }
 
+  // Stalen nok onder de naad van een dubbel lessenaardak (HouseModel): shape is het samengestelde zadel en rect
+  // de twee units samen, beide in de lokale maten van deze unit; de balk hoort bij deze unit (3D, kosten).
+  function sharedRidgeBeam(roofState, unitRoof, shape, rect, span, cuts) {
+    const pl = unitRoof.planes[0];
+    if (!pl || !pl.data) return null;
+    const r = unitRoof.rect, kgM2 = unitRoof.specs.totalKg / Math.max(0.1, (r.x1 - r.x0) * (r.z1 - r.z0) / 1e6);
+    const rb = computeRidgeBeam(roofState, shape, rect, shape.axis === 'x', pl.data.calcData, kgM2, span, cuts);
+    if (!rb) return null;
+    rb.alongX = shape.axis === 'x';
+    rb.shared = true;
+    unitRoof.ridgeBeam = rb;
+    addRidgeSpecs(unitRoof.specs, rb);
+    return rb;
+  }
+
+  function addRidgeSpecs(specs, ridgeBeam) {
+    Object.assign(specs, {
+      nokStaalM: ridgeBeam ? ridgeBeam.length / 1000 : 0, nokStaalKg: ridgeBeam ? ridgeBeam.steelKg : 0,
+      nokVulhoutM3: ridgeBeam ? ridgeBeam.fillM3 : 0, nokVulhoutKg: ridgeBeam ? ridgeBeam.fillKg : 0
+    });
+    specs.totalKg += specs.nokStaalKg + specs.nokVulhoutKg;
+  }
+
+  // Dakaansluiting (HouseModel.roofJoins): vlakken h = a + bx·x + bz·z, samengevoegd volgens expr
+  // (vlaknummer of ['min' | 'max', ...]). extra(k): ophoging per vlak (bovenkant dak).
+  const planeAt = (pl, p) => pl.a + pl.bx * p.x + pl.bz * p.z;
+  function joinValue(join, p, extra) {
+    const at = (e) => Array.isArray(e) ? Math[e[0]](...e.slice(1).map(at)) : planeAt(join.planes[e], p) + (extra ? extra(e) : 0);
+    return at(join.expr);
+  }
+  function convexHull(pts) {
+    const sorted = pts.slice().sort((a, b) => a.x - b.x || a.z - b.z);
+    const cross = (o, a, b) => (a.x - o.x) * (b.z - o.z) - (a.z - o.z) * (b.x - o.x);
+    const half = (list) => list.reduce((h, q) => {
+      while (h.length >= 2 && cross(h[h.length - 2], h[h.length - 1], q) <= 0.01 * Math.hypot(q.x - h[h.length - 2].x, q.z - h[h.length - 2].z)) h.pop();
+      h.push(q);
+      return h;
+    }, []);
+    const lo = half(sorted), up = half(sorted.slice().reverse());
+    const out = lo.slice(0, -1).concat(up.slice(0, -1));
+    return out.filter((p, k) => { const q = out[(k + 1) % out.length]; return Math.hypot(q.x - p.x, q.z - p.z) > 0.5; });
+  }
+
+  // Dak van één unit in een dakaansluiting (join in unit-lokale maten): per vlak de convexe stukken binnen het dek,
+  // sporen haaks op de goot (kreupel tegen kil- en hoekkepers), kepers en nokken op de grenzen tussen de vlakken.
+  // Alles als houtwerk zoals het bovenste deel van een wolfsdak (cap); de eigen nok wordt de stalen nokbalk.
+  function computeJoinedRoof(roofState, join, rect, shape) {
+    const fp = roofState.deck.floor;
+    const joistW = fp.joistWidth || 70, joistH = fp.joistHeight || 220, underlay = fp.underlayThick || 22;
+    const covering = coveringFor(roofState.covering, shape.type);
+    const cov = COVERINGS[covering] || COVERINGS.dakleer;
+    const pls = join.planes.map((pl, k) => {
+      const slope = Math.hypot(pl.bx, pl.bz), cos = 1 / Math.sqrt(1 + slope * slope);
+      const tV = underlay / cos, jV = joistH / cos, bV = BESCHOT_MM / cos, covV = cov.thickMM / cos;
+      const under = (p) => planeAt(pl, p);
+      return { key: k, pl, slope, cos, tV, jV, bV, covV, vThick: tV + jV + bV + covV, under, f: under, along: Math.abs(pl.bx) >= Math.abs(pl.bz) ? 'p' : 'q' };
+    });
+    const activeAt = (p) => {
+      const h = joinValue(join, p);
+      return pls.reduce((a, b) => Math.abs(b.under(p) - h) < Math.abs(a.under(p) - h) ? b : a);
+    };
+
+    const box = [{ x: rect.x0, z: rect.z0 }, { x: rect.x1, z: rect.z0 }, { x: rect.x1, z: rect.z1 }, { x: rect.x0, z: rect.z1 }];
+    const clipBox = (poly) => [(p) => p.x - rect.x0, (p) => rect.x1 - p.x, (p) => p.z - rect.z0, (p) => rect.z1 - p.z]
+      .reduce((pl, f) => pl.length >= 3 ? clipPoly(pl, f) : pl, poly);
+    const pairs = [];
+    pls.forEach((A, i) => pls.slice(i + 1).forEach(B => {
+      if (Math.hypot(A.pl.bx - B.pl.bx, A.pl.bz - B.pl.bz) > 1e-9) pairs.push({ A, B, f: (p) => A.under(p) - B.under(p) });
+    }));
+    // Afgeronde wandhoogtes maken bijna samenvallende lijnen: splinters (gemiddeld < 0,5 mm breed) vallen weg.
+    const perim = (poly) => poly.reduce((t, p, k) => { const q = poly[(k + 1) % poly.length]; return t + Math.hypot(q.x - p.x, q.z - p.z); }, 0);
+    const sliver = (poly) => quadArea(poly) < Math.max(100, 0.25 * perim(poly));
+    let cells = [box];
+    pairs.forEach(({ f }) => {
+      cells = cells.flatMap(c => [clipPoly(c, f), clipPoly(c, p => -f(p))]).filter(c => c.length >= 3 && !sliver(c));
+    });
+    const centroid = (poly) => ({ x: poly.reduce((t, p) => t + p.x, 0) / poly.length, z: poly.reduce((t, p) => t + p.z, 0) / poly.length });
+    const regions = [];
+    pls.forEach(pl => {
+      const list = cells.filter(c => activeAt(centroid(c)) === pl).map(convexHull);
+      // Aangrenzende cellen samenvoegen zolang het geheel convex blijft.
+      let merged = true;
+      while (merged) {
+        merged = false;
+        for (let i = 0; i < list.length && !merged; i++) {
+          for (let j = i + 1; j < list.length && !merged; j++) {
+            const h = convexHull(list[i].concat(list[j]));
+            if (quadArea(h) - quadArea(list[i]) - quadArea(list[j]) < 0.5 * perim(h)) { list[i] = h; list.splice(j, 1); merged = true; }
+          }
+        }
+      }
+      list.filter(poly => poly.length >= 3).forEach(poly => regions.push(Object.assign({}, pl, { poly })));
+    });
+
+    // Grenzen tussen twee vlakken: bol = nok (waterpas) of hoekkeper, hol = kilkeper.
+    const members = [];
+    pairs.forEach(({ A, B, f }) => {
+      const gx = A.pl.bx - B.pl.bx, gz = A.pl.bz - B.pl.bz, g = Math.hypot(gx, gz), c0 = f({ x: 0, z: 0 });
+      const o = { x: -c0 * gx / (g * g), z: -c0 * gz / (g * g) }, d = { x: -gz / g, z: gx / g }, n = { x: gx / g, z: gz / g };
+      let t0 = -Infinity, t1 = Infinity;
+      [['x', rect.x0, rect.x1], ['z', rect.z0, rect.z1]].forEach(([k, lo, hi]) => {
+        if (Math.abs(d[k]) < 1e-9) { if (o[k] < lo || o[k] > hi) t1 = -Infinity; return; }
+        const a = (lo - o[k]) / d[k], b = (hi - o[k]) / d[k];
+        t0 = Math.max(t0, Math.min(a, b));
+        t1 = Math.min(t1, Math.max(a, b));
+      });
+      if (!(t1 - t0 >= 100)) return;
+      const pt = (t) => ({ x: o.x + d.x * t, z: o.z + d.z * t });
+      const ts = [t0, t1];
+      pairs.forEach(q => {
+        const dn = q.f(pt(1)) - q.f(pt(0));
+        if (Math.abs(dn) < 1e-9) return;
+        const t = -q.f(pt(0)) / dn;
+        if (t > t0 && t < t1) ts.push(t);
+      });
+      ts.sort((a, b) => a - b);
+      const segs = [];
+      let cur = null;
+      ts.slice(0, -1).forEach((ta, k) => {
+        const tb = ts[k + 1];
+        if (tb - ta < 1) return;
+        const m = pt((ta + tb) / 2), off = (s) => ({ x: m.x + n.x * s, z: m.z + n.z * s });
+        const s1 = activeAt(off(2)), s2 = activeAt(off(-2));
+        if (Math.abs(joinValue(join, m) - A.under(m)) > 0.5 || !((s1 === A && s2 === B) || (s1 === B && s2 === A))) { cur = null; return; }
+        const onA = off(s1 === A ? 2 : -2), convex = B.under(onA) > A.under(onA);
+        if (cur && cur.convex === convex) { cur.tb = tb; return; }
+        cur = { ta, tb, convex };
+        segs.push(cur);
+      });
+      // Waterpas en bol: nok als de vlakken van elkaar af aflopen, anders een knik.
+      const ridge = A.pl.bx * B.pl.bx + A.pl.bz * B.pl.bz < 0;
+      segs.forEach(sg => {
+        const P = pt(sg.ta), Q = pt(sg.tb), level = Math.abs(A.under(P) - A.under(Q)) < 1;
+        members.push({ kind: !sg.convex ? 'kilkeper' : !level ? 'hoekkeper' : ridge ? 'nokbalk' : 'knikbalk', A: P, B: Q, rg: A });
+      });
+    });
+
+    const alongX = shape.axis === 'x';
+    const own = members.find(m => m.kind === 'nokbalk' && (alongX ? Math.abs(m.A.x - m.B.x) < 1 : Math.abs(m.A.z - m.B.z) < 1));
+    const steel = own && roofState.steelRidge !== false;
+    const { hw, beams, awayFrom, addBeam } = beamTools(joistW);
+    members.forEach(m => { if (!(steel && m === own)) addBeam(m.kind, m.rg, m.A, m.B, [], true); });
+    pls.forEach(pl => {
+      const polys = regions.filter(rg => rg.key === pl.key).map(rg => rg.poly);
+      if (!polys.length) return;
+      const fixed = pl.along === 'p' ? 'z' : 'x';
+      const [lo, hi] = fixed === 'z' ? [rect.z0, rect.z1] : [rect.x0, rect.x1];
+      joistSpread(fp, hi - lo).map(v => lo + v).forEach(v => {
+        const spans = polys.map(poly => cutLine(poly, fixed, v)).filter(Boolean).sort((a, b) => a[0] - b[0]);
+        const runs = [];
+        spans.forEach(sp => {
+          const last = runs[runs.length - 1];
+          if (last && sp[0] <= last[1] + 1) last[1] = Math.max(last[1], sp[1]);
+          else runs.push(sp.slice());
+        });
+        runs.forEach(span => {
+          const pt = (t) => fixed === 'z' ? { x: t, z: v } : { x: v, z: t };
+          const A = pt(span[0]), B = pt(span[1]), mid = pt((span[0] + span[1]) / 2);
+          const clips = members.filter(m => distToSeg(A, m) < hw + 1 || distToSeg(B, m) < hw + 1).map(m => awayFrom(m, mid));
+          addBeam('spoor', pl, A, B, clips);
+        });
+      });
+    });
+
+    const ownBeams = clipBeams(beams, clipBox);
+    const capSpecs = regionSpecs(ownBeams, regions, joistW, joistH, underlay, covering);
+    const kgM2 = capSpecs.totalKg / Math.max(0.1, (rect.x1 - rect.x0) * (rect.z1 - rect.z0) / 1e6);
+    const q = own ? (alongX ? [own.A.z, own.B.z] : [own.A.x, own.B.x]) : null;
+    // Wolfsdak: de nok loopt hier tot de aansluiting, de inkorting van de wolfseinden volgt uit span.
+    const ridgeShape = shape.type === 'wolf' ? Object.assign({}, shape, { type: 'zadel' }) : shape;
+    const ridgeBeam = steel ? computeRidgeBeam(roofState, ridgeShape, rect, alongX, { underlayThick: underlay, joistH }, kgM2, [Math.min(...q), Math.max(...q)]) : null;
+    if (ridgeBeam) ridgeBeam.alongX = alongX;
+    const specs = Object.assign({}, capSpecs);
+    addRidgeSpecs(specs, ridgeBeam);
+    const heights = regions.flatMap(rg => rg.poly.map(p => rg.under(p)));
+    const maxTop = Math.max(...regions.map(rg => Math.max(...rg.poly.map(p => rg.under(p) + rg.vThick))));
+    const cap = {
+      kind: 'join', pA: rect.x0, pB: rect.x1, q0: rect.z0, q1: rect.z1, eave: Math.min(...heights), ridgeH: Math.max(...heights),
+      slope: Math.max(...regions.map(rg => rg.slope)), joistW, joistH, regions, beams: ownBeams, specs: capSpecs, maxTop
+    };
+    // Knikpunten van de daklijn op de randen (nok, knik, wolfseind, kepers): daar knikt ook het boeideel.
+    const ridges = [];
+    members.forEach(m => [m.A, m.B].forEach(p => {
+      const onX = Math.abs(p.x - rect.x0) < 1 || Math.abs(p.x - rect.x1) < 1, onZ = Math.abs(p.z - rect.z0) < 1 || Math.abs(p.z - rect.z1) < 1;
+      const r = onX && !onZ ? { axis: 'z', value: p.z } : onZ && !onX ? { axis: 'x', value: p.x } : null;
+      if (r && !ridges.some(q => q.axis === r.axis && Math.abs(q.value - r.value) < 1)) ridges.push(r);
+    }));
+    return {
+      shape, covering, planes: [], specs, ridgeBeam, cap, rect, alongX: true, ridges, maxTop,
+      undersideAt: (x, z) => joinValue(join, { x, z }),
+      topAt: (x, z) => joinValue(join, { x, z }, k => pls[k].vThick)
+    };
+  }
+
   const DENSITY_WOOD_KGM3 = 450, DENSITY_OSB_KGM3 = 650; // zelfde als FloorModel
   function computeCap(roofState, shape, rect, alongX, covering) {
     const H = (p) => profileHeight(shape.profile, p);
@@ -465,53 +670,7 @@ window.RoofModel = (() => {
       .filter(rg => rg.poly.length >= 3 && quadArea(rg.poly) > 100);
     if (!clipped.some(rg => rg.along === 'q')) return null;
 
-    const cutLine = (poly, fixed, v) => {
-      const ts = [];
-      poly.forEach((a, k) => {
-        const b = poly[(k + 1) % poly.length], av = a[fixed], bv = b[fixed];
-        if ((av - v) * (bv - v) > 0 || Math.abs(bv - av) < 1e-9) return;
-        const t = (v - av) / (bv - av), o = fixed === 'x' ? 'z' : 'x';
-        ts.push(a[o] + (b[o] - a[o]) * t);
-      });
-      return ts.length >= 2 ? [Math.min(...ts), Math.max(...ts)] : null;
-    };
-    const hw = joistW / 2;
-    const rectAround = (A, B) => {
-      const L = Math.hypot(B.x - A.x, B.z - A.z), nx = -(B.z - A.z) / L * hw, nz = (B.x - A.x) / L * hw;
-      return [{ x: A.x - nx, z: A.z - nz }, { x: B.x - nx, z: B.z - nz }, { x: B.x + nx, z: B.z + nz }, { x: A.x + nx, z: A.z + nz }];
-    };
-    const awayFrom = (m, from) => {
-      const L = Math.hypot(m.B.x - m.A.x, m.B.z - m.A.z), nx = -(m.B.z - m.A.z) / L, nz = (m.B.x - m.A.x) / L;
-      const d = (p) => (p.x - m.A.x) * nx + (p.z - m.A.z) * nz;
-      const sgn = d(from) >= 0 ? 1 : -1;
-      return (p) => sgn * d(p) - hw;
-    };
-    const distToSeg = (p, m) => {
-      const dx = m.B.x - m.A.x, dz = m.B.z - m.A.z, L2 = dx * dx + dz * dz;
-      const t = Math.max(0, Math.min(1, ((p.x - m.A.x) * dx + (p.z - m.A.z) * dz) / L2));
-      return Math.hypot(p.x - (m.A.x + dx * t), p.z - (m.A.z + dz * t));
-    };
-    const beams = [];
-    const addBeam = (kind, rg, A, B, clips, lineHeight) => {
-      if (Math.hypot(B.x - A.x, B.z - A.z) < 100) return null;
-      let poly = rectAround(A, B);
-      (clips || []).forEach(f => { if (poly.length >= 3) poly = clipPoly(poly, f); });
-      if (poly.length < 3) return null;
-      const dx = B.x - A.x, dz = B.z - A.z, L = Math.hypot(dx, dz);
-      const yA = rg.under(A) + rg.tV, yB = rg.under(B) + rg.tV;
-      const yAt = lineHeight
-        ? (p) => yA + (yB - yA) * Math.max(0, Math.min(1, ((p.x - A.x) * dx + (p.z - A.z) * dz) / (L * L)))
-        : (p) => rg.under(p) + rg.tV;
-      const ts = poly.map(p => ((p.x - A.x) * dx + (p.z - A.z) * dz) / L);
-      const plan = Math.max(...ts) - Math.min(...ts), slope = Math.abs(yB - yA) / L;
-      if (plan < 50) return null;
-      const bm = {
-        kind, A, B, poly, yAt, jV: rg.jV, slope,
-        length: Math.round(plan * Math.sqrt(1 + slope * slope)), angle: Math.round(Math.atan(slope) * 1800 / Math.PI) / 10
-      };
-      beams.push(bm);
-      return bm;
-    };
+    const { hw, beams, awayFrom, addBeam } = beamTools(joistW);
     const mOf = (x) => regions.find(rg => rg.key === (x < pR ? 'm1' : 'm2')) || regions[0];
     const hOf = (z) => regions.find(rg => rg.key === (z < qM ? 'h1' : 'h2')) || regions[0];
     const ends = [{ x: pR, z: Math.min(qM, q0 + inset) }, { x: pR, z: Math.max(qM, q1 - inset) }];
@@ -534,8 +693,7 @@ window.RoofModel = (() => {
       if (ridgeBeam && roofState.steelRidge !== false) beams.splice(beams.indexOf(ridgeBeam), 1);
     }
     const members = kops.concat(hips, ridgeBeam ? [ridgeBeam] : []);
-    const spread = (len) => FloorModel.computeFrame({ width: len, depth: 1000, joistWidth: joistW, joistHeight: joistH, minSpacing: fp.minSpacing, maxSpacing: fp.maxSpacing, underlayThick: underlay }).joists.map(x => x + len / 2);
-    const qs = spread(q1 - q0).map(v => q0 + v), ps = spread(pB - pA).map(v => pA + v);
+    const qs = joistSpread(fp, q1 - q0).map(v => q0 + v), ps = joistSpread(fp, pB - pA).map(v => pA + v);
     regions.forEach(rg => {
       const fixed = rg.along === 'p' ? 'z' : 'x';
       (rg.along === 'p' ? qs : ps).forEach(v => {
@@ -548,8 +706,69 @@ window.RoofModel = (() => {
       });
     });
 
-    const ownBeams = beams.map(bm => {
-      const poly = clipBox(bm.poly);
+    const ownBeams = clipBeams(beams, clipBox);
+    const specs = regionSpecs(ownBeams, clipped, joistW, joistH, underlay, covering);
+    const maxTop = Math.max(...clipped.map(rg => Math.max(...rg.poly.map(pt => rg.under(pt) + rg.vThick))));
+    return { pA: cp0, pR, pB: cp1, q0: cq0, q1: cq1, hipH, slope: sA, joistW, joistH, regions: clipped, beams: ownBeams, specs, maxTop };
+  }
+
+  // Houtwerk op dakvlakken met een eigen omtrek (wolfseinden, dakaansluiting); balken als rechthoek in bovenaanzicht.
+  function cutLine(poly, fixed, v) {
+    const ts = [];
+    poly.forEach((a, k) => {
+      const b = poly[(k + 1) % poly.length], av = a[fixed], bv = b[fixed];
+      if ((av - v) * (bv - v) > 0 || Math.abs(bv - av) < 1e-9) return;
+      const t = (v - av) / (bv - av), o = fixed === 'x' ? 'z' : 'x';
+      ts.push(a[o] + (b[o] - a[o]) * t);
+    });
+    return ts.length >= 2 ? [Math.min(...ts), Math.max(...ts)] : null;
+  }
+  function distToSeg(p, m) {
+    const dx = m.B.x - m.A.x, dz = m.B.z - m.A.z, L2 = dx * dx + dz * dz;
+    const t = Math.max(0, Math.min(1, ((p.x - m.A.x) * dx + (p.z - m.A.z) * dz) / L2));
+    return Math.hypot(p.x - (m.A.x + dx * t), p.z - (m.A.z + dz * t));
+  }
+  function joistSpread(fp, len) {
+    return FloorModel.computeFrame({ width: len, depth: 1000, joistWidth: fp.joistWidth || 70, joistHeight: fp.joistHeight || 220, minSpacing: fp.minSpacing, maxSpacing: fp.maxSpacing, underlayThick: fp.underlayThick || 22 })
+      .joists.map(x => x + len / 2);
+  }
+  function beamTools(joistW) {
+    const hw = joistW / 2, beams = [];
+    const rectAround = (A, B) => {
+      const L = Math.hypot(B.x - A.x, B.z - A.z), nx = -(B.z - A.z) / L * hw, nz = (B.x - A.x) / L * hw;
+      return [{ x: A.x - nx, z: A.z - nz }, { x: B.x - nx, z: B.z - nz }, { x: B.x + nx, z: B.z + nz }, { x: A.x + nx, z: A.z + nz }];
+    };
+    const awayFrom = (m, from) => {
+      const L = Math.hypot(m.B.x - m.A.x, m.B.z - m.A.z), nx = -(m.B.z - m.A.z) / L, nz = (m.B.x - m.A.x) / L;
+      const d = (p) => (p.x - m.A.x) * nx + (p.z - m.A.z) * nz;
+      const sgn = d(from) >= 0 ? 1 : -1;
+      return (p) => sgn * d(p) - hw;
+    };
+    const addBeam = (kind, rg, A, B, clips, lineHeight) => {
+      if (Math.hypot(B.x - A.x, B.z - A.z) < 100) return null;
+      let poly = rectAround(A, B);
+      (clips || []).forEach(f => { if (poly.length >= 3) poly = clipPoly(poly, f); });
+      if (poly.length < 3) return null;
+      const dx = B.x - A.x, dz = B.z - A.z, L = Math.hypot(dx, dz);
+      const yA = rg.under(A) + rg.tV, yB = rg.under(B) + rg.tV;
+      const yAt = lineHeight
+        ? (p) => yA + (yB - yA) * Math.max(0, Math.min(1, ((p.x - A.x) * dx + (p.z - A.z) * dz) / (L * L)))
+        : (p) => rg.under(p) + rg.tV;
+      const ts = poly.map(p => ((p.x - A.x) * dx + (p.z - A.z) * dz) / L);
+      const plan = Math.max(...ts) - Math.min(...ts), slope = Math.abs(yB - yA) / L;
+      if (plan < 50) return null;
+      const bm = {
+        kind, A, B, poly, yAt, jV: rg.jV, slope,
+        length: Math.round(plan * Math.sqrt(1 + slope * slope)), angle: Math.round(Math.atan(slope) * 1800 / Math.PI) / 10
+      };
+      beams.push(bm);
+      return bm;
+    };
+    return { hw, beams, awayFrom, addBeam };
+  }
+  function clipBeams(beams, clip) {
+    return beams.map(bm => {
+      const poly = clip(bm.poly);
       if (poly.length < 3 || quadArea(poly) < 100) return null;
       const dx = bm.B.x - bm.A.x, dz = bm.B.z - bm.A.z, L = Math.hypot(dx, dz);
       const ts = poly.map(p => ((p.x - bm.A.x) * dx + (p.z - bm.A.z) * dz) / L);
@@ -557,20 +776,19 @@ window.RoofModel = (() => {
       if (plan < 50) return null;
       return Object.assign({}, bm, { poly, length: Math.round(plan * Math.sqrt(1 + slope * slope)) });
     }).filter(Boolean);
-
+  }
+  function regionSpecs(beams, regions, joistW, joistH, underlay, covering) {
     const W = joistW * 1e-3, Hh = joistH * 1e-3;
-    const woodM3 = ownBeams.reduce((t, bm) => t + bm.length * 1e-3 * W * Hh, 0);
-    const areaM2 = clipped.reduce((t, rg) => t + quadArea(rg.poly) / rg.cos, 0) / 1e6;
+    const woodM3 = beams.reduce((t, bm) => t + bm.length * 1e-3 * W * Hh, 0);
+    const areaM2 = regions.reduce((t, rg) => t + quadArea(rg.poly) / rg.cos, 0) / 1e6;
     const cs = coverSpecs(covering, areaM2), osbVol = areaM2 * underlay * 1e-3, bVol = areaM2 * BESCHOT_MM * 1e-3;
-    const specs = Object.assign({
+    return Object.assign({
       joistWoodM3: woodM3, joistWoodKg: woodM3 * DENSITY_WOOD_KGM3,
       osbAreaM2: areaM2, osbVolM3: osbVol, osbKg: osbVol * DENSITY_OSB_KGM3,
       beschotM2: areaM2, beschotVolM3: bVol, beschotKg: bVol * DENSITY_OSB_KGM3,
       voidM3: Math.max(0, areaM2 * Hh - woodM3),
       totalKg: woodM3 * DENSITY_WOOD_KGM3 + (osbVol + bVol) * DENSITY_OSB_KGM3 + cs.coverKg
     }, cs);
-    const maxTop = Math.max(...clipped.map(rg => Math.max(...rg.poly.map(pt => rg.under(pt) + rg.vThick))));
-    return { pA: cp0, pR, pB: cp1, q0: cq0, q1: cq1, hipH, slope: sA, joistW, joistH, regions: clipped, beams: ownBeams, specs, maxTop };
   }
 
   // Afschuiving i.p.v. kanteling (lokaal +Z = oplopende as): plan = z·cos θ, Y = y/cos θ + z·sin θ.
@@ -581,7 +799,8 @@ window.RoofModel = (() => {
     if (unitRoof.cap) group.add(buildCap3D(unitRoof, opts));
     if (unitRoof.ridgeBeam) {
       const r = unitRoof.rect;
-      group.add(buildRidgeBeam3D(unitRoof.ridgeBeam, (r.x0 + r.x1) / 2, (r.z0 + r.z1) / 2, unitRoof.alongX, opts.materials));
+      const rb = unitRoof.ridgeBeam;
+      group.add(buildRidgeBeam3D(rb, (r.x0 + r.x1) / 2, (r.z0 + r.z1) / 2, rb.alongX !== undefined ? rb.alongX : unitRoof.alongX, opts.materials));
     }
     unitRoof.planes.forEach(pl => {
       const g = new THREE.Group();
@@ -647,7 +866,7 @@ window.RoofModel = (() => {
       const T = poly.map(pt => P(pt, bottom(pt) + h)), B = poly.map(pt => P(pt, bottom(pt)));
       const UV = poly.map(pt => uvOf ? uvOf(pt) : [0, 0]), z2 = [0, 0];
       const tri = (a, b, cc, ua, ub, uc) => { pos.push(...a, ...b, ...cc); uv.push(...ua, ...ub, ...uc); };
-      const up = (T[1][0] - T[0][0]) * (T[2][2] - T[0][2]) - (T[1][2] - T[0][2]) * (T[2][0] - T[0][0]) < 0;
+      const up = T.reduce((t, a, k) => { const b = T[(k + 1) % n]; return t + a[0] * b[2] - b[0] * a[2]; }, 0) < 0;
       for (let k = 1; k < n - 1; k++) up ? tri(T[0], T[k], T[k + 1], UV[0], UV[k], UV[k + 1]) : tri(T[0], T[k + 1], T[k], UV[0], UV[k + 1], UV[k]);
       const topCount = pos.length / 3;
       for (let k = 1; k < n - 1; k++) up ? tri(B[0], B[k + 1], B[k], z2, z2, z2) : tri(B[0], B[k], B[k + 1], z2, z2, z2);
@@ -709,7 +928,8 @@ window.RoofModel = (() => {
   }
 
   // facadeDepth negatief = gevel van een hoger deel die naar dit dak kijkt: de rand stopt tegen die gevel.
-  function computeEdge(settings, roofs, facadeDepth) {
+  // facadeFels(a, b, normal): de gevel onder deze rand heeft felsplaten (met een felsdak: geen boeideel).
+  function computeEdge(settings, roofs, facadeDepth, facadeFels) {
     const s = normalizeSettings(settings);
     const rects = roofs.map(r => r.rect);
     if (!roofs.length) return null;
@@ -753,15 +973,18 @@ window.RoofModel = (() => {
         const j = (i + 1) % n, b = base[j];
         const mid = { x: (a.x + b.x) / 2, z: (a.z + b.z) / 2 };
         const owner = members.find(r => onRectEdge(r.rect, mid)) || members[0];
-        const fascia = owner.fascia !== false;
+        const normal = rectilinearNormal(a, b);
+        const fels = coverKind(owner.covering) === 'fels' && !!facadeFels && !!facadeFels(a, b, normal);
+        const fascia = owner.fascia !== false && !fels;
         const off = fascia ? offBoei : offTrim;
         // Tegen een hoger dak vervalt de ribbe (daar staat de gevel), boven een lager dak blijft hij zonder spots.
         const nb = others.find(r => onRectEdge(r.rect, mid));
         const dropped = !!nb && nb.topAt(mid.x, mid.z) > owner.topAt(mid.x, mid.z);
+        const above = fels ? FELS_EDGE.aboveMM : EDGE_ABOVE_MM;
         return {
-          a, b, owner: owner.unitId, fascia, normal: rectilinearNormal(a, b),
+          a, b, owner: owner.unitId, fascia, fels, covering: owner.covering, normal,
           outerA: off[i], outerB: off[j], spotA: offSpot[i], spotB: offSpot[j],
-          topAt: (p) => owner.topAt(p.x, p.z) + EDGE_ABOVE_MM, ridges: owner.ridges || [],
+          topAt: (p) => owner.topAt(p.x, p.z) + above, ridges: owner.ridges || [],
           overRoof: !!nb && !dropped, dropped
         };
       });
@@ -781,6 +1004,23 @@ window.RoofModel = (() => {
       });
       segs.forEach((sg, i) => Object.assign(sg, shifted[i], { facadeDepth: depRaw[i] }));
 
+      // Rand zonder overstek (daktrim, felsrand): de felsrand ligt net vóór de gevelbekleding en loopt bij een hoek
+      // door tot de buitenkant van de buurrand; een boeideel ernaast stopt op de buitenkant van zo'n rand.
+      const edgeOff = (k) => segs[k].fels ? Math.max(TRIM_THICK_MM, depRaw[k] + FELS_EDGE.lipMM) : TRIM_THICK_MM;
+      const mv = (p, nrm, d) => ({ x: p.x + nrm.x * d, z: p.z + nrm.z * d });
+      segs.forEach((sg, i) => {
+        const ends = [['a', 'outerA', (i - 1 + n) % n], ['b', 'outerB', (i + 1) % n]];
+        if (sg.fels) ends.forEach(([k, ok, j]) => {
+          const nb = segs[j], q = mv(sg[k], sg.normal, edgeOff(i));
+          sg[ok] = perp(sg.normal, nb.normal) && !nb.fascia && !nb.dropped ? mv(q, nb.normal, edgeOff(j)) : q;
+        });
+        else if (sg.fascia) ends.forEach(([k, ok, j]) => {
+          const nb = segs[j];
+          if (nb.fascia || nb.dropped || !perp(sg.normal, nb.normal)) return;
+          sg[ok] = mv(mv(sg[k], sg.normal, s.overhang), nb.normal, edgeOff(j));
+        });
+      });
+
       const insideOther = (p) => others.some(r => p.x > r.rect.x0 + 0.5 && p.x < r.rect.x1 - 0.5 && p.z > r.rect.z0 + 0.5 && p.z < r.rect.z1 - 0.5);
       segs.forEach((sg, i) => {
         if (sg.dropped) return;
@@ -810,7 +1050,9 @@ window.RoofModel = (() => {
       fasciaHeight: s.fasciaHeight, trimHeight: s.trimHeight, fasciaColor: s.fasciaColor,
       top, edgeAbove: EDGE_ABOVE_MM,
       fasciaLengthMM: segments.filter(sg => sg.fascia).reduce((t, sg) => t + segLen(sg), 0),
-      trimLengthMM: segments.filter(sg => !sg.fascia).reduce((t, sg) => t + segLen(sg), 0),
+      // Felsrand: zetwerk van de dakplaten, zit in de prijs van de felsplaten.
+      trimLengthMM: segments.filter(sg => !sg.fascia && !sg.fels).reduce((t, sg) => t + segLen(sg), 0),
+      felsEdgeLengthMM: segments.filter(sg => sg.fels).reduce((t, sg) => t + segLen(sg), 0),
       soffitM2: segments.filter(sg => sg.fascia).reduce((t, sg) => t + quadArea([sg.a, sg.b, sg.outerB, sg.outerA]), 0) / 1e6,
       spots: []
     };
@@ -842,6 +1084,17 @@ window.RoofModel = (() => {
     return geo;
   }
 
+  // Hoogte van de rand vanaf sg.topAt naar beneden: boeideel, felsrand of daktrim (met opstand boven het dak).
+  function edgeHeight(edge, sg) {
+    return sg.fascia ? edge.fasciaHeight : sg.fels ? FELS_EDGE.heightMM : edge.trimHeight + edge.edgeAbove;
+  }
+  // Kleur van de rand in tekeningen (hex-getal).
+  function edgeColor(edge, sg) {
+    if (sg.fascia) return (FASCIA_COLORS[edge.fasciaColor] || FASCIA_COLORS.antraciet).hex;
+    const c = sg.fels && COVERINGS[sg.covering];
+    return c ? parseInt(c.color.slice(1), 16) : 0xb8bcc0;
+  }
+
   function buildEdge3D(edge, materials, opts) {
     const o = opts || {};
     const toM = 0.001;
@@ -855,9 +1108,16 @@ window.RoofModel = (() => {
         const f = (p) => r.axis === 'x' ? p.x - r.value : p.z - r.value;
         polys = polys.flatMap(pl => [clipPoly(pl, f), clipPoly(pl, p => -f(p))]).filter(pl => pl.length >= 3);
       });
-      const h = sg.fascia ? edge.fasciaHeight : edge.trimHeight + edge.edgeAbove;
+      // Schoorsteen: de rand stopt ertegen (gaps langs de rand, in wereld-mm).
+      const alongZ = Math.abs(sg.a.x - sg.b.x) < 0.5;
+      (sg.gaps || []).forEach(([g0, g1]) => {
+        const t = (p) => alongZ ? p.z : p.x;
+        polys = polys.flatMap(pl => [clipPoly(pl, p => g0 - t(p)), clipPoly(pl, p => t(p) - g1)]).filter(pl => pl.length >= 3);
+      });
+      const h = edgeHeight(edge, sg);
+      const mat = sg.fascia ? materials.fasciaMaterial : sg.fels ? coveringMaterial(sg.covering) || materials.trimMaterial : materials.trimMaterial;
       polys.forEach(pl => {
-        const mesh = new THREE.Mesh(prismGeometry(pl, sg.topAt, h), sg.fascia ? materials.fasciaMaterial : materials.trimMaterial);
+        const mesh = new THREE.Mesh(prismGeometry(pl, sg.topAt, h), mat);
         mesh.visible = o.edgeVisible !== false;
         group.add(mesh);
       });
@@ -879,7 +1139,11 @@ window.RoofModel = (() => {
     s.overhang = Math.min(OVERHANG_MAX, Math.max(OVERHANG_MIN, s.overhang));
     delete s.edge; delete s.spots; // oud (v0.3.0): nu per unit
     const h = s.house || {};
-    s.house = { enabled: !!h.enabled, form: h.form && UnitModel.ROOF_TYPES[h.form.type] ? Object.assign({}, h.form) : null, cover: !!h.cover };
+    const form = h.form ? Object.assign({}, h.form) : null;
+    // v0.6.2: mansarde vervallen, wordt een zadeldak met dezelfde nok.
+    if (form && form.type === 'mansarde') { form.type = 'zadel'; delete form.kneeH; delete form.kneeIn; delete form.kneeRatio; }
+    s.house = { enabled: !!h.enabled, form: form && UnitModel.ROOF_TYPES[form.type] ? form : null, cover: !!h.cover };
+    s.posts = PostModel.normalizeSettings(s.posts);
     if (!FASCIA_COLORS[s.fasciaColor]) s.fasciaColor = DEFAULT_SETTINGS.fasciaColor;
     return s;
   }
@@ -887,7 +1151,7 @@ window.RoofModel = (() => {
   return {
     DAKLEER_MM, BESCHOT_MM, EDGE_ABOVE_MM, RIET, FELS, coverKind, OVERHANG_MIN, OVERHANG_MAX, DEFAULT_SETTINGS, SPOT_RATIO, FASCIA_COLORS, COVERINGS, coveringFor, coveringThumbUrl,
     createDefaultRoof, thickness, createMaterials, build3D, computeSpecs,
-    computeShape, shapeFromProfile, shapeLines, wallProfile, profileHeight, computeUnitRoof, buildUnit3D, capRegions,
-    computeEdge, buildEdge3D, normalizeSettings
+    computeShape, shapeFromProfile, shapeLines, wallProfile, profileHeight, computeUnitRoof, computeJoinedRoof, sharedRidgeBeam, joinValue, buildUnit3D, capRegions,
+    FELS_EDGE, computeEdge, buildEdge3D, edgeHeight, edgeColor, normalizeSettings
   };
 })();

js/room/room-model.js

@@ -200,7 +200,8 @@ window.RoomModel = (() => {
     const la = Math.max(-W / 2, Math.min(toLx(e.s0), toLx(e.s1))), lb = Math.min(W / 2, Math.max(toLx(e.s0), toLx(e.s1)));
     if (lb - la < 1) return { quads: [], area: 0 };
     const hiAt = (lx) => Math.min(tl.at(lx), H);
-    const ops = (cfg.openings || []).map(op => ({ x0: -W / 2 + op.x, x1: -W / 2 + op.x + op.w, y0: op.y, top: (lx) => WallModel.openingTopAt(op, lx + W / 2) }));
+    // Schoorsteen met binnenkant 'zoals de wanden': de afwerking van de ruimte loopt eroverheen.
+    const ops = (cfg.openings || []).filter(op => !(op.chimney && op.chimney.inside === 'wand')).map(op => ({ x0: -W / 2 + op.x, x1: -W / 2 + op.x + op.w, y0: op.y, top: (lx) => WallModel.openingTopAt(op, lx + W / 2) }));
     const bs = new Set([la, lb]);
     tl.pts.forEach(pt => bs.add(pt.x));
     for (let i = 0; i < tl.pts.length - 1; i++) {

js/unit/unit-model.js

@@ -200,7 +200,7 @@ window.UnitModel = (() => {
     const pieces = wallLayout.pieces.map(([a, b, inL, inR], i) => {
       const openings = fullConfig.openings
         .filter(op => op.x >= a - EPS && op.x + op.w <= b + EPS)
-        .map(op => { used.add(op.id); return { id: op.id, type: op.type, fill: op.fill, w: op.w, h: op.h, hR: op.hR, y: op.y, anchor: 'left', offset: op.x - a }; });
+        .map(op => { used.add(op.id); return { id: op.id, type: op.type, fill: op.fill, chimney: op.chimney, koppel: op.koppel, w: op.w, h: op.h, hR: op.hR, y: op.y, anchor: 'left', offset: op.x - a }; });
       const params = Object.assign({}, wallState.wall, {
         width: b - a, heightLeft: Math.round(heightAt(a)), heightRight: Math.round(heightAt(b))
       }, topsIn(a, b, 0));
@@ -223,7 +223,7 @@ window.UnitModel = (() => {
       if (Math.min(hA, hB) < MIN_RAISE_MM) return;
       const openings = fullConfig.openings
         .filter(op => op.x >= a - EPS && op.x + op.w <= b + EPS && op.y >= base - EPS)
-        .map(op => { used.add(op.id); return { id: op.id, type: op.type, fill: op.fill, w: op.w, h: op.h, hR: op.hR, y: op.y - base, anchor: 'left', offset: op.x - a }; });
+        .map(op => { used.add(op.id); return { id: op.id, type: op.type, fill: op.fill, chimney: op.chimney, koppel: op.koppel, w: op.w, h: op.h, hR: op.hR, y: op.y - base, anchor: 'left', offset: op.x - a }; });
       const params = Object.assign({}, wallState.wall, {
         width: b - a, heightLeft: Math.round(hA), heightRight: Math.round(hB)
       }, topsIn(a, b, base));
@@ -306,8 +306,8 @@ window.UnitModel = (() => {
     return Math.max(w.heightLeft, w.heightRight, w.heightMid > 0 ? w.heightMid : 0, ...(w.topPts || []).map(q => q.h));
   }
 
-  // kneeRatio / cutRatio gaan voor kneeH / cut, zodat ze meeschalen als goot of nok verandert.
-  const LIMITS = { ridge: 5000, eave: 3000, short: 4300, long: 14000 };
+  // cutRatio gaat voor cut, zodat ze meeschalen als goot of nok verandert.
+  const LIMITS = { ridge: 5000, eave: 3000, short: 4700, long: 14000 };
   function clampSize(floor, keep) {
     floor.width = Math.min(LIMITS.long, floor.width);
     floor.depth = Math.min(LIMITS.long, floor.depth);
@@ -317,9 +317,9 @@ window.UnitModel = (() => {
     }
     return floor;
   }
-  const ROOF_TYPES = { plat: 'Plat', lessenaar: 'Lessenaar', zadel: 'Zadel', mansarde: 'Mansarde', wolf: 'Wolfsdak' };
+  const ROOF_TYPES = { plat: 'Plat', lessenaar: 'Lessenaar', zadel: 'Zadel', wolf: 'Wolfsdak' };
   const RIDGES = { z: 'Noord–zuid', x: 'West–oost' };
-  const hasRidge = (type) => type === 'zadel' || type === 'mansarde' || type === 'wolf';
+  const hasRidge = (type) => type === 'zadel' || type === 'wolf';
   function gableOf(form) {
     if (hasRidge(form.type)) return form.ridge === 'x' ? 'links' : 'achter';
     if (form.type === 'lessenaar') return form.dir === 'links' || form.dir === 'rechts' ? 'achter' : 'links';
@@ -333,10 +333,8 @@ window.UnitModel = (() => {
       const full = fullTopLine(w, gableSpan(unitState, side));
       const F = full[full.length - 1].u, inner = full.slice(1, -1);
       const L = full[0], R = full[full.length - 1], low = Math.round(Math.min(L.h, R.h));
-      if (inner.length === 3) {
-        const high = Math.round(inner[1].h);
-        return { type: 'mansarde', ridge, low, high, kneeH: Math.round(inner[0].h), kneeIn: Math.round(inner[0].u), kneeRatio: (inner[0].h - low) / Math.max(1, high - low) };
-      }
+      // v0.6.2: mansarde vervallen; een opgeslagen mansarde wordt een zadeldak met dezelfde nok.
+      if (inner.length === 3) return { type: 'zadel', ridge, low, high: Math.round(inner[1].h) };
       if (inner.length === 2 && Math.abs(inner[0].h - inner[1].h) < 0.5) {
         const slope = (inner[0].h - L.h) / Math.max(1, inner[0].u);
         const high = Math.round(L.h + slope * F / 2);
@@ -351,6 +349,10 @@ window.UnitModel = (() => {
     const h = Math.max(...Object.values(W).map(wallTopOf));
     return { type: 'plat', low: h, high: h };
   }
+  function dropMansarde(unitState) {
+    const f = roofForm(unitState), side = f.type === 'zadel' ? gableOf(f) : null;
+    if (side && fullTopLine(unitState.walls[side].wall, gableSpan(unitState, side)).length === 5) applyRoofForm(unitState, f);
+  }
   function applyRoofForm(unitState, form) {
     const side = form.type !== 'plat' ? gableOf(form) : 'achter';
     const g = gableSpan(unitState, side);
@@ -365,16 +367,7 @@ window.UnitModel = (() => {
     const half = F / 2;
     let line = [{ u: 0, h: low }, { u: F, h: low }];
     if (sloped && form.type === 'zadel') line = [{ u: 0, h: low }, { u: half, h: high }, { u: F, h: low }];
-    else if (sloped && form.type === 'mansarde') {
-      // Knik altijd boven de rechte lijn goot–nok, anders wordt het een hol dak.
-      const kIn = Math.max(eMin + 100, Math.min(half - 100, Math.round(form.kneeIn || F * 0.18)));
-      const minK = low + (high - low) * kIn / half + 20;
-      const want = form.kneeRatio > 0 ? low + form.kneeRatio * (high - low) : form.kneeH;
-      const kH = Math.round(Math.min(high - 20, Math.max(minK, want || minK)));
-      line = kH > minK - 1 && high - kH >= 20
-        ? [{ u: 0, h: low }, { u: kIn, h: kH }, { u: half, h: high }, { u: F - kIn, h: kH }, { u: F, h: low }]
-        : [{ u: 0, h: low }, { u: half, h: high }, { u: F, h: low }];
-    } else if (sloped && form.type === 'wolf') {
+    else if (sloped && form.type === 'wolf') {
       const minR = (eMin + 50) / half;
       const ratio = form.cutRatio > 0 ? form.cutRatio : form.cut ? (form.cut - low) / (high - low) : 0.6;
       const cut = Math.round(Math.max(low + 50, Math.min(high - 50, low + Math.max(0.05, minR, Math.min(0.95, ratio)) * (high - low))));
@@ -401,5 +394,5 @@ window.UnitModel = (() => {
     }
   }
 
-  return { WALL_SIDES, CORNER_MODES, ROOF_TYPES, RIDGES, LIMITS, clampSize, hasRidge, clone, createDefaultState, localToWorld, computeLayout, normalizeSplits, splitFacadeAt, topLineOn, topParamsOn, topParamsFromLayout, wallPieces, syncWallHeights, wallTopOf, gableOf, roofForm, applyRoofForm, formLine, validateState };
+  return { WALL_SIDES, CORNER_MODES, ROOF_TYPES, RIDGES, LIMITS, clampSize, hasRidge, clone, createDefaultState, localToWorld, computeLayout, normalizeSplits, splitFacadeAt, topLineOn, topParamsOn, topParamsFromLayout, wallPieces, syncWallHeights, wallTopOf, gableOf, roofForm, dropMansarde, applyRoofForm, formLine, validateState };
 })();

js/wall/kozijn-model.js

@@ -92,6 +92,11 @@ window.KozijnModel = (() => {
     });
     return out;
   }
+  // >= 0 onder de bovenrand q[3]-q[2] van een vierhoek.
+  const below = (q) => (p) => {
+    const a = q[3], b = q[2];
+    return (b.y - a.y) * (p.x - a.x) - (b.x - a.x) * (p.y - a.y);
+  };
   const rect = (x0, x1, y0, y1) => [{ x: x0, y: y0 }, { x: x1, y: y0 }, { x: x1, y: y1 }, { x: x0, y: y1 }];
   const areaOf = (pts) => Math.abs(pts.reduce((a, p, i) => { const q = pts[(i + 1) % pts.length]; return a + p.x * q.y - q.x * p.y; }, 0)) / 2;
 
@@ -134,6 +139,11 @@ window.KozijnModel = (() => {
     g.add(mesh);
   };
 
+  // Gekoppelde zijde (op.joinL/joinR, zie WallModel.resolveOpenings): geen speling en geen kaderstijl;
+  // 'stijl' = de helft van een tussenstijl die het kozijn ernaast afmaakt, 'stolp' = niets (bladen tegen elkaar).
+  const sideGap = (join) => join ? 0 : P.gap;
+  const sideKader = (join) => join === 'stolp' ? 0 : join ? P.tussen / 2 : P.kader;
+
   // Lokaal: x vanaf links, y vanaf de onderkant, +z = buiten (mm in, meters uit).
   function build3D(op, fill, place) {
     const f = normalize(fill);
@@ -143,15 +153,12 @@ window.KozijnModel = (() => {
     const depth = Math.min(P.depth, place.depth || P.depth);
     const z1 = place.zOut, z0 = z1 - depth;
     const hR = op.hR !== undefined ? op.hR : op.h;
-    const outer = insetPoly([{ x: 0, y: 0 }, { x: op.w, y: 0 }, { x: op.w, y: hR }, { x: 0, y: op.h }], [P.gap, P.gap, P.gap, P.gap]);
-    const below = (q) => (p) => {
-      const a = q[3], b = q[2];
-      return (b.y - a.y) * (p.x - a.x) - (b.x - a.x) * (p.y - a.y);
-    };
+    const kL = sideKader(op.joinL), kR = sideKader(op.joinR);
+    const outer = insetPoly([{ x: 0, y: 0 }, { x: op.w, y: 0 }, { x: op.w, y: hR }, { x: 0, y: op.h }], [P.gap, sideGap(op.joinR), P.gap, sideGap(op.joinL)]);
     const glass = (pts) => slab(g, pts, null, z1 - 50 - P.glass / 2, z1 - 50 + P.glass / 2, mat('glass'), null, false);
 
     if (f.type === 'raam') {
-      const inner = insetPoly(outer, [P.kader, P.kader, P.kader, P.kader]);
+      const inner = insetPoly(outer, [P.kader, kR, P.kader, kL]);
       slab(g, outer, [inner], z0, z1, mIn, mOut);
       let pane = inner;
       if (f.rooster && Math.min(inner[3].y, inner[2].y) - inner[0].y > P.rooster + 200) {
@@ -171,8 +178,8 @@ window.KozijnModel = (() => {
 
     const sill = place.exterior !== false ? P.dorpel : 0;
     const frameOuter = insetPoly(outer, [sill, 0, 0, 0]);
-    const inner = insetPoly(frameOuter, [0, P.kader, P.kader, P.kader]);
-    const u = [frameOuter[0], inner[0], inner[3], inner[2], inner[1], frameOuter[1], frameOuter[2], frameOuter[3]];
+    const inner = insetPoly(frameOuter, [0, kR, P.kader, kL]);
+    const u = [...(kL ? [frameOuter[0], inner[0]] : []), inner[3], inner[2], ...(kR ? [inner[1], frameOuter[1]] : []), frameOuter[2], frameOuter[3]];
     slab(g, u, null, z0, z1, mIn, mOut);
     if (sill) box(g, mat('rubber'), (outer[0].x + outer[1].x) / 2, outer[0].y + sill / 2, z1 - depth / 2 + 15, outer[1].x - outer[0].x, sill, depth + 30);
 
@@ -187,12 +194,9 @@ window.KozijnModel = (() => {
       return g;
     }
 
-    const hingeR = f.hinge === 'rechts', leafR = f.leaf === 'rechts';
-    const side = ix1 - ix0 - P.leafW - P.tussen >= P.minLight;
-    const la = side && leafR ? ix1 - P.leafW : ix0, lb = side && !leafR ? ix0 + P.leafW : ix1;
-    const lowTop = Math.min(topAt(ix0), topAt(ix1));
-    const transom = lowTop - iy0 - P.leafH - P.tussen >= P.minLight;
-    const ly1 = transom ? iy0 + P.leafH : Infinity;
+    const hingeR = f.hinge === 'rechts';
+    const d = doorSplit(f, ix0, ix1, iy0, Math.min(topAt(ix0), topAt(ix1)));
+    const { side, leafR, la, lb, transom, ly1 } = d;
     if (side) {
       const [t0, g0, g1] = leafR ? [la - P.tussen, ix0, la - P.tussen] : [lb, lb + P.tussen, ix1];
       bar(region(t0, t0 + P.tussen, iy0, ly1));
@@ -204,20 +208,10 @@ window.KozijnModel = (() => {
       glass(region(ix0, ix1, ly1 + P.tussen, Infinity));
     }
 
-    // Deurblad (3 mm speling, onderaan 10 mm boven dorpel/vloer).
-    const leaf = clipPoly(rect(la + 3, lb - 3, iy0 + (sill ? 3 : 10), Math.min(ly1 - 3, 1e6)), (p) => top({ x: p.x, y: p.y + 3 }));
-    if (leaf.length < 3) return g;
-    const xs = leaf.map(p => p.x), ys = leaf.map(p => p.y);
-    const lx0 = Math.min(...xs), lxR = Math.max(...xs), lb0 = Math.min(...ys), lt = Math.min(topAt(lx0), topAt(lxR), ly1) - 3;
+    const L = doorLeaf(f, d, iy0, sill, top, topAt);
+    if (!L) return g;
+    const { leaf, lx0, lxR, lb0, lt, lw, holes } = L;
     const lzOut = z1 - 15, lzIn = lzOut - P.leafT;
-    let holes = null;
-    const lw = lxR - lx0;
-    if (f.volglas && lw >= 400 && lt - lb0 >= 800) {
-      holes = [rect(lx0 + 110, lxR - 110, lb0 + 140, lt - 110)]; // glasdeur: smal kader rondom
-    } else if (f.glas && lw >= 500 && lt - lb0 >= 1400) {
-      const gx = hingeR ? lxR - lw * 0.3 : lx0 + lw * 0.3, gw = Math.min(160, lw * 0.18);
-      holes = [rect(gx - gw / 2, gx + gw / 2, lb0 + 350, lt - 300)]; // glas: in het deurblad (hieronder)
-    }
     const outward = f.swing === 'buiten';
     const hx = hingeR ? lxR : lx0, hz = outward ? lzOut : lzIn;
     const pivot = new THREE.Group(), lg = new THREE.Group();
@@ -245,28 +239,64 @@ window.KozijnModel = (() => {
   }
 
   const SLIDE = { overlap: 50, gap: 12, railH: 40, railD: 45, leafT: 40, frame: 70 };
-  function buildSlideLeaves(g, f, o) {
+  // Deurblad en zij-/bovenlicht binnen de kaderopening ix0..ix1 vanaf iy0 (lowTop = laagste bovenkant).
+  function doorSplit(f, ix0, ix1, iy0, lowTop) {
+    const leafR = f.leaf === 'rechts';
+    const side = ix1 - ix0 - P.leafW - P.tussen >= P.minLight;
+    const la = side && leafR ? ix1 - P.leafW : ix0, lb = side && !leafR ? ix0 + P.leafW : ix1;
+    const transom = lowTop - iy0 - P.leafH - P.tussen >= P.minLight;
+    return { side, leafR, la, lb, transom, ly1: transom ? iy0 + P.leafH : Infinity };
+  }
+
+  // Deurblad (3 mm speling, onderaan 10 mm boven dorpel/vloer) met het glas erin.
+  function doorLeaf(f, d, iy0, sill, top, topAt) {
+    const leaf = clipPoly(rect(d.la + 3, d.lb - 3, iy0 + (sill ? 3 : 10), Math.min(d.ly1 - 3, 1e6)), (p) => top({ x: p.x, y: p.y + 3 }));
+    if (leaf.length < 3) return null;
+    const xs = leaf.map(p => p.x), ys = leaf.map(p => p.y);
+    const lx0 = Math.min(...xs), lxR = Math.max(...xs), lb0 = Math.min(...ys), lt = Math.min(topAt(lx0), topAt(lxR), d.ly1) - 3;
+    const lw = lxR - lx0;
+    let holes = null;
+    if (f.volglas && lw >= 400 && lt - lb0 >= 800) {
+      holes = [rect(lx0 + 110, lxR - 110, lb0 + 140, lt - 110)]; // glasdeur: smal kader rondom
+    } else if (f.glas && lw >= 500 && lt - lb0 >= 1400) {
+      const gx = f.hinge === 'rechts' ? lxR - lw * 0.3 : lx0 + lw * 0.3, gw = Math.min(160, lw * 0.18);
+      holes = [rect(gx - gw / 2, gx + gw / 2, lb0 + 350, lt - 300)];
+    }
+    return { leaf, lx0, lxR, lb0, lt, lw, holes };
+  }
+
+  function slideLeaves(f, ix0, ix1, iy0, sill, topAt) {
     const n = f.leaves, opbouw = f.mount === 'opbouw';
+    const ov = opbouw ? SLIDE.overlap : -3;
+    const xa = ix0 - ov, xb = ix1 + ov;
+    const yb = iy0 + (sill ? 3 : 10);
+    const yt = Math.min(topAt(ix0), topAt(ix1)) + (opbouw ? SLIDE.overlap : -3);
+    const lw = (xb - xa) / n;
+    const dirs = n === 2 ? [-1, 1] : [f.dir === 'rechts' ? 1 : -1];
+    const leaves = dirs.map((dir, i) => ({
+      dir, x0: xa + i * lw + (n === 2 ? (i ? 1 : 0) : 0), x1: xa + (i + 1) * lw - (n === 2 && !i ? 1 : 0)
+    }));
+    const pane = (l) => f.glas && l.x1 - l.x0 > 2 * SLIDE.frame + 100 ? rect(l.x0 + SLIDE.frame, l.x1 - SLIDE.frame, yb + SLIDE.frame + 30, yt - SLIDE.frame) : null;
+    return { n, opbouw, xa, xb, yb, yt, lw, dirs, leaves, pane };
+  }
+
+  function buildSlideLeaves(g, f, o) {
+    const S = slideLeaves(f, o.ix0, o.ix1, o.iy0, o.sill, o.topAt);
+    const { n, opbouw, xa, xb, yb, yt, lw, dirs } = S;
     const out = f.side === 'buiten';
     const faceIn = o.place.faceIn !== undefined ? o.place.faceIn : o.z0;
     const faceOut = o.place.faceOut !== undefined ? o.place.faceOut : o.z1;
-    const ov = opbouw ? SLIDE.overlap : -3;
-    const xa = o.ix0 - ov, xb = o.ix1 + ov;
-    const yb = o.iy0 + (o.sill ? 3 : 10);
-    const yt = Math.min(o.topAt(o.ix0), o.topAt(o.ix1)) + (opbouw ? SLIDE.overlap : -3);
     const lt = opbouw ? SLIDE.leafT : P.leafT;
     const [lz0, lz1] = opbouw
       ? (out ? [faceOut + SLIDE.gap, faceOut + SLIDE.gap + lt] : [faceIn - SLIDE.gap - lt, faceIn - SLIDE.gap])
       : [(faceIn + faceOut) / 2 - lt / 2, (faceIn + faceOut) / 2 + lt / 2];
-    const lw = (xb - xa) / n;
-    const dirs = n === 2 ? [-1, 1] : [f.dir === 'rechts' ? 1 : -1];
-    dirs.forEach((dir, i) => {
-      const x0 = xa + i * lw + (n === 2 ? (i ? 1 : 0) : 0), x1 = xa + (i + 1) * lw - (n === 2 && !i ? 1 : 0);
+    S.leaves.forEach(l => {
+      const { dir, x0, x1 } = l;
       const lg = new THREE.Group();
       g.add(lg);
       const pts = rect(x0, x1, yb, yt);
-      if (f.glas && x1 - x0 > 2 * SLIDE.frame + 100) {
-        const pane = rect(x0 + SLIDE.frame, x1 - SLIDE.frame, yb + SLIDE.frame + 30, yt - SLIDE.frame);
+      const pane = S.pane(l);
+      if (pane) {
         slab(lg, pts, [pane], lz0, lz1, colorMat(f.in), opbouw ? null : colorMat(f.out));
         slab(lg, pane, null, (lz0 + lz1) / 2 - 4, (lz0 + lz1) / 2 + 4, mat('glass'), null, false);
       } else {
@@ -291,12 +321,11 @@ window.KozijnModel = (() => {
     const f = normalize(fill);
     if (!f || f.type === 'raam') return [];
     const zIn = faces.zIn, zOut = faces.zOut;
-    const ix0 = P.gap + P.kader, ix1 = op.w - P.gap - P.kader;
+    const ix0 = sideGap(op.joinL) + sideKader(op.joinL), ix1 = op.w - sideGap(op.joinR) - sideKader(op.joinR);
     const out = [];
     if (f.type === 'deur') {
-      const hingeR = f.hinge === 'rechts', leafR = f.leaf === 'rechts';
-      const side = ix1 - ix0 - P.leafW - P.tussen >= P.minLight;
-      const la = side && leafR ? ix1 - P.leafW : ix0, lb = side && !leafR ? ix0 + P.leafW : ix1;
+      const hingeR = f.hinge === 'rechts';
+      const { la, lb } = doorSplit(f, ix0, ix1, 0, 0);
       const L = lb - la, hx = hingeR ? lb : la, s = hingeR ? -1 : 1;
       const outward = f.swing === 'buiten', hz = outward ? zOut : zIn, dz = outward ? 1 : -1;
       out.push({ kind: 'leaf', pts: [{ x: hx, z: hz }, { x: hx, z: hz + dz * L }] });
@@ -326,5 +355,47 @@ window.KozijnModel = (() => {
     return out;
   }
 
-  return { COLORS, FILL_TYPES, HINGES, SWINGS, SLIDE_MOUNTS, SLIDE_SIDES, SLIDE_DIRS, PROFILE: P, normalize, defaultFill, build3D, planSymbol, colorMaterial: colorMat };
+  // Aanzicht van buiten, lokaal als build3D (x vanaf links, y vanaf de onderkant van de opening): gesloten omtrekken.
+  function viewLines(op, fill, exterior) {
+    const f = normalize(fill);
+    if (!f) return [];
+    const hR = op.hR !== undefined ? op.hR : op.h;
+    const kL = sideKader(op.joinL), kR = sideKader(op.joinR);
+    const outer = insetPoly([{ x: 0, y: 0 }, { x: op.w, y: 0 }, { x: op.w, y: hR }, { x: 0, y: op.h }], [P.gap, sideGap(op.joinR), P.gap, sideGap(op.joinL)]);
+    const out = [outer];
+    const add = (pts) => { if (pts && pts.length > 2 && areaOf(pts) > 1) out.push(pts); };
+    if (f.type === 'raam') {
+      const inner = insetPoly(outer, [P.kader, kR, P.kader, kL]);
+      add(inner);
+      if (f.rooster && Math.min(inner[3].y, inner[2].y) - inner[0].y > P.rooster + 200) add(insetPoly(inner, [0, 0, P.rooster, 0]));
+      return out;
+    }
+    const sill = exterior !== false ? P.dorpel : 0;
+    const frameOuter = insetPoly(outer, [sill, 0, 0, 0]);
+    const inner = insetPoly(frameOuter, [0, kR, P.kader, kL]);
+    if (sill) add(frameOuter);
+    add(inner);
+    const ix0 = inner[0].x, ix1 = inner[1].x, iy0 = inner[0].y;
+    const top = below(inner);
+    const topAt = (x) => inner[3].y + (x - inner[3].x) / (inner[2].x - inner[3].x) * (inner[2].y - inner[3].y);
+    const region = (x0, x1, y0, y1) => clipPoly(rect(x0, x1, y0, Math.min(y1, 1e6)), top);
+    if (f.type === 'schuifdeur') {
+      const S = slideLeaves(f, ix0, ix1, iy0, sill, topAt);
+      if (!S.opbouw || f.side === 'buiten') S.leaves.forEach(l => { add(region(l.x0, l.x1, S.yb, S.yt)); add(S.pane(l)); });
+      return out;
+    }
+    const d = doorSplit(f, ix0, ix1, iy0, Math.min(topAt(ix0), topAt(ix1)));
+    if (d.side) {
+      const t0 = d.leafR ? d.la - P.tussen : d.lb;
+      add(region(t0, t0 + P.tussen, iy0, d.ly1));
+      const [g0, g1] = d.leafR ? [ix0, d.la - P.tussen] : [d.lb + P.tussen, ix1];
+      add(region(g0, g1, iy0, iy0 + P.kader));
+    }
+    if (d.transom) add(region(ix0, ix1, d.ly1, d.ly1 + P.tussen));
+    const L = doorLeaf(f, d, iy0, sill, top, topAt);
+    if (L) { add(L.leaf); (L.holes || []).forEach(add); }
+    return out;
+  }
+
+  return { COLORS, FILL_TYPES, HINGES, SWINGS, SLIDE_MOUNTS, SLIDE_SIDES, SLIDE_DIRS, PROFILE: P, normalize, defaultFill, build3D, planSymbol, viewLines, colorMaterial: colorMat };
 })();

js/wall/wall-model.js

@@ -72,6 +72,50 @@ window.WallModel = (() => {
       return mat;
     }
 
+    // Felsplaten (staande naad) op de gevel: zelfde opbouw als verticale rabat (doek, latten, bekleding), alleen het
+    // materiaal verschilt. Kleuren ook voor het dak (RoofModel.FELS). In 3D de naden als textuur over het blok.
+    const FELS = {
+      SEAM_MM: 500, TILE_SEAMS: 6,
+      COLORS: {
+        zink: { label: 'Zink', hex: '#8e9497' },
+        antraciet: { label: 'Antraciet', hex: '#3d4146' },
+        zwart: { label: 'Zwart', hex: '#1f2022' }
+      }
+    };
+    const isFelsColor = (key) => !!FELS.COLORS[key];
+    const felsHex = (key) => (FELS.COLORS[key] || FELS.COLORS.antraciet).hex;
+    const felsMaterials = {};
+    function felsMaterial(key) {
+      const k = isFelsColor(key) ? key : 'antraciet';
+      if (felsMaterials[k]) return felsMaterials[k];
+      let mat;
+      const canvas = typeof document !== 'undefined' && document.createElement('canvas');
+      const ctx = canvas && canvas.getContext && canvas.getContext('2d');
+      if (!ctx) mat = new THREE.MeshStandardMaterial({ color: felsHex(k), roughness: 0.4, metalness: 0.55 });
+      else {
+        const B = 100, N = FELS.TILE_SEAMS; // 5 mm/px
+        canvas.width = B * N;
+        canvas.height = 16;
+        const base = new THREE.Color(felsHex(k));
+        const shade = (f) => '#' + base.clone().multiplyScalar(f).getHexString();
+        const col = (a, b, color) => { ctx.fillStyle = color; ctx.fillRect(a, 0, b - a, canvas.height); };
+        for (let i = 0; i < N; i++) {
+          const a = i * B, f = 0.97 + ((i * 29) % 7) / 100; // per baan net iets anders
+          col(a, a + B, shade(f));
+          col(a + 6, a + 14, shade(f * 1.04));    // lichte zetting naast de naad
+          col(a, a + 2, shade(f * 0.6));          // schaduw van de naad
+          col(a + 2, a + 5, shade(f * 1.35));     // staande naad (licht)
+        }
+        const tex = new THREE.CanvasTexture(canvas);
+        tex.wrapS = tex.wrapT = THREE.RepeatWrapping;
+        tex.repeat.set(1000 / (FELS.SEAM_MM * N), 1);
+        tex.anisotropy = 8;
+        mat = new THREE.MeshStandardMaterial({ color: 0xffffff, map: tex, roughness: 0.4, metalness: 0.55 });
+      }
+      felsMaterials[k] = mat;
+      return mat;
+    }
+
     function claddingOffset(buitenMateriaal, stone, stuc) {
       if (buitenMateriaal === 'vochtdoek') return 2 * BATTEN.thick + CLADDING_THICK_MM;
       if (buitenMateriaal !== 'cementplaat') return 0;
@@ -121,6 +165,14 @@ window.WallModel = (() => {
       return mat;
     }
 
+    // Materiaal van een gevelbekleding (UV in meters): felsplaten, steen, stuc of rabat; null = kale plaat.
+    function claddingMaterial(f) {
+      if (isFelsColor(f.fels)) return felsMaterial(f.fels);
+      if (isStoneFinish(f.stone)) return stoneMaterial(f.stone);
+      if (isStucColor(f.stuc)) return stucMaterial(f.stuc);
+      return f.rabatColor ? rabatMaterial(f.rabatColor, f.cladding) : null;
+    }
+
     // Hoogte vanaf het loopvlak (= onderkant van de wand).
     const TRASRAAM_DEFAULT_MM = 350;
     function trasraamFor(heightMM, finish) {
@@ -269,6 +321,17 @@ window.WallModel = (() => {
       };
     }
 
+    function raiseTop(CONFIG, d) {
+      return d ? Object.assign({}, CONFIG, {
+        wallHeightLeft: CONFIG.wallHeightLeft + d, wallHeightRight: CONFIG.wallHeightRight + d,
+        wallTop: CONFIG.wallTop.map(q => ({ x: q.x, h: q.h + d }))
+      }) : CONFIG;
+    }
+    // Bovenrand van de buitenlagen: per punt op het dak (skinTop) of de wandrand + skinAbove.
+    function skinConfig(CONFIG, skinAbove, skinTop) {
+      return skinTop ? Object.assign({}, CONFIG, { wallHeightLeft: skinTop.hL, wallHeightRight: skinTop.hR, wallTop: skinTop.pts }) : raiseTop(CONFIG, skinAbove);
+    }
+
     function topPlateOutlines(tl) {
       const n = tl.segs.length, L = tl.pts[0], R = tl.pts[n];
       return tl.segs.map((sg, i) => [
@@ -309,20 +372,26 @@ window.WallModel = (() => {
       const edgeMargin = studWidth * CORNER_STUDS;
 
       let resolved = rawOpenings.map(raw => {
-        const w = Math.min(Math.max(400, raw.w), maxOpW);
+        // Schoorsteen: de sparing kan smaller zijn (half over een naad tussen units).
+        const w = Math.min(Math.max(raw.type === 'schoorsteen' ? 100 : 400, raw.w), maxOpW);
 
         let x;
         if (raw.anchor === 'right') x = wallWidth - raw.offset - w;
         else if (raw.anchor === 'middle') x = (wallWidth - w) / 2 + raw.offset;
         else x = raw.offset;
 
-        return { id: raw.id, type: raw.type || 'raam', fill: raw.fill || null, w, anchor: raw.anchor, offset: raw.offset, x, rawH: raw.h, rawHR: hRightOf(raw), rawY: raw.y };
+        const o = { id: raw.id, type: raw.type || 'raam', fill: raw.fill || null, w, anchor: raw.anchor, offset: raw.offset, x, rawH: raw.h, rawHR: hRightOf(raw), rawY: raw.y };
+        if (raw.chimney) o.chimney = raw.chimney;
+        if (raw.koppel && o.type !== 'schoorsteen') o.koppel = true;
+        return o;
       });
 
       resolved.sort((a, b) => a.x - b.x);
 
+      // Een schoorsteen over een naad loopt door tot het wandeinde: daar geen hoekstijlen in de schoorsteen.
+      const mL = (o) => o.chimney && o.chimney.atStart ? 0 : edgeMargin, mR = (o) => o.chimney && o.chimney.atEnd ? 0 : edgeMargin;
       resolved.forEach(o => {
-        o.x = Math.max(edgeMargin, Math.min(o.x, wallWidth - o.w - edgeMargin));
+        o.x = Math.max(mL(o), Math.min(o.x, wallWidth - o.w - mR(o)));
       });
 
       // Boven elkaar (bijv. raam boven deur) mogen openingen in x overlappen. Schuin: de hoogste kant telt.
@@ -336,22 +405,42 @@ window.WallModel = (() => {
       // uitsparingen. Naast een deur 1× extra voor de dubbele stijl.
       const gapOf = (a, b) => studWidth * (2 + (isDoor(a) ? 1 : 0) + (isDoor(b) ? 1 : 0));
 
+      // Koppelen: staat een gekoppelde opening tegen zijn buur aan (niet verder dan de normale tussenruimte),
+      // met dezelfde onderkant en bovenkant op de naad, dan vormen ze één sparing zonder stijlen, dagkant of
+      // latten ertussen; de rechter sluit direct aan. Samen niet breder dan de max. sparingbreedte.
+      const rightOf = new Map(), leftOf = new Map(), koppelWhy = new Map();
+      const groupW = (o) => { let w = 0; for (let p = o; p; p = leftOf.get(p)) w += p.w; return w; };
+      const FAR = 'staat niet tegen de opening ernaast aan';
+      const blame = (a, b, why) => [a, b].forEach(o => { if (o.koppel && (!koppelWhy.has(o) || koppelWhy.get(o) === FAR)) koppelWhy.set(o, why); });
+      resolved.forEach((a, i) => {
+        const b = resolved.slice(i + 1).find(o => !stacked(a, o));
+        if (!b || !(a.koppel || b.koppel) || a.type === 'schoorsteen' || b.type === 'schoorsteen' || leftOf.has(b)) return;
+        let why = null;
+        if (b.x - a.x - a.w > gapOf(a, b) + 0.5) why = FAR;
+        else if (Math.abs(a.rawY - b.rawY) > 0.5 || Math.abs(a.rawY + a.rawHR - b.rawY - b.rawH) > 0.5) why = 'onderkant en hoogte moeten gelijk zijn aan de opening ernaast';
+        else if (groupW(a) + b.w > maxOpW + 0.5) why = `samen breder dan ${maxOpW} mm`;
+        if (why) { blame(a, b, why); return; }
+        rightOf.set(a, b);
+        leftOf.set(b, a);
+      });
+      const gap = (a, b) => rightOf.get(a) === b ? 0 : gapOf(a, b);
+
       for (let i = 1; i < resolved.length; i++) {
-        const cur = resolved[i];
+        const cur = resolved[i], partner = leftOf.get(cur);
+        if (partner) cur.x = partner.x + partner.w;
         for (let j = 0; j < i; j++) {
           const prev = resolved[j];
           if (stacked(prev, cur)) continue;
-          cur.x = Math.max(cur.x, prev.x + prev.w + gapOf(prev, cur));
+          cur.x = Math.max(cur.x, prev.x + prev.w + gap(prev, cur));
         }
       }
 
-      const rightLimit = wallWidth - edgeMargin;
       for (let i = resolved.length - 1; i >= 0; i--) {
         const cur = resolved[i];
-        let maxX = rightLimit - cur.w;
+        let maxX = wallWidth - mR(cur) - cur.w;
         for (let j = i + 1; j < resolved.length; j++) {
           const next = resolved[j];
-          if (!stacked(cur, next)) maxX = Math.min(maxX, next.x - gapOf(cur, next) - cur.w);
+          if (!stacked(cur, next)) maxX = Math.min(maxX, next.x - gap(cur, next) - cur.w);
         }
         if (cur.x > maxX) cur.x = maxX;
       }
@@ -359,22 +448,34 @@ window.WallModel = (() => {
       // De daklijn is bol, dus de rechte lijn tussen twee punten eronder blijft eronder.
       resolved.forEach(o => {
         const ceilL = roofAt(o.x), ceilR = roofAt(o.x + o.w);
-        const hL = Math.min(Math.max(400, o.rawH), Math.max(400, ceilL - plateThick * 2));
-        const hR = Math.min(Math.max(400, o.rawHR), Math.max(400, ceilR - plateThick * 2));
+        // Schoorsteen: tot de bovenkant, zonder latei en bovenregel erin (geen hout in het rookkanaal).
+        const keep = o.type === 'schoorsteen' ? 0 : plateThick * 2;
+        const hL = Math.min(Math.max(400, o.rawH), Math.max(400, ceilL - keep));
+        const hR = Math.min(Math.max(400, o.rawHR), Math.max(400, ceilR - keep));
         const maxOpY = Math.max(0, Math.min(ceilL - hL, ceilR - hR) - plateThick);
         o.y = Math.max(0, Math.min(o.rawY, maxOpY));
         o.h = hL;
         o.hR = hR;
       });
 
+      // Twee draaideuren: stolp (bladen tegen elkaar), anders één gedeelde tussenstijl.
+      const swing = (o) => !!o.fill && o.fill.type === 'deur';
+      rightOf.forEach((b, a) => {
+        const fits = Math.abs(b.x - a.x - a.w) < 0.5 && Math.abs(a.y - b.y) < 0.5 && Math.abs(a.y + a.hR - b.y - b.h) < 0.5;
+        if (!fits) { rightOf.delete(a); blame(a, b, 'past hier niet tegen de opening ernaast'); return; }
+        a.joinR = b.joinL = swing(a) && swing(b) ? 'stolp' : 'stijl';
+      });
+      koppelWhy.forEach((why, o) => { if (!o.joinL && !o.joinR) o.koppelWarn = why; });
+      resolved.forEach(o => { if (o.koppel && !o.joinL && !o.joinR && !o.koppelWarn) o.koppelWarn = 'geen opening direct ernaast'; });
+
       resolved.forEach(o => {
-        o.overflowing = (o.x < edgeMargin - 0.5) || (o.x + o.w > wallWidth - edgeMargin + 0.5);
+        o.overflowing = (o.x < mL(o) - 0.5) || (o.x + o.w > wallWidth - mR(o) + 0.5);
       });
       for (let i = 0; i < resolved.length; i++) {
         for (let j = i + 1; j < resolved.length; j++) {
           const a = resolved[i], b = resolved[j];
           const [l, r] = a.x <= b.x ? [a, b] : [b, a];
-          if (!stacked(a, b, true) && r.x < l.x + l.w + gapOf(l, r) - 0.5) { a.overflowing = true; b.overflowing = true; }
+          if (!stacked(a, b, true) && r.x < l.x + l.w + gap(l, r) - 0.5) { a.overflowing = true; b.overflowing = true; }
         }
       }
 
@@ -453,10 +554,14 @@ window.WallModel = (() => {
       });
       const cands = [];
       cornerStuds.forEach(x => cands.push({ x, kind: 'hoek' }));
+      // Gekoppelde zijde: geen stijlen ernaast; boven (en onder) de naad één kreupele stijl.
       ops.forEach(op => {
         const x0 = startX + op.x, x1 = x0 + op.w;
-        cands.push({ x: x0 - sw / 2, kind: 'koning' }, { x: x1 + sw / 2, kind: 'koning' });
-        if (isDoor(op)) cands.push({ x: x0 - 1.5 * sw, kind: 'dubbel' }, { x: x1 + 1.5 * sw, kind: 'dubbel' });
+        if (!op.joinL) cands.push({ x: x0 - sw / 2, kind: 'koning' });
+        if (!op.joinR) cands.push({ x: x1 + sw / 2, kind: 'koning' });
+        else cands.push({ x: x1, kind: 'kreupel', seam: true });
+        if (isDoor(op) && !op.joinL) cands.push({ x: x0 - 1.5 * sw, kind: 'dubbel' });
+        if (isDoor(op) && !op.joinR) cands.push({ x: x1 + 1.5 * sw, kind: 'dubbel' });
       });
 
       const cols = [];
@@ -478,16 +583,17 @@ window.WallModel = (() => {
       ops.forEach(op => calculateSegmentPositions(op.w, CONFIG.minSpacing, CONFIG.maxSpacing)
         .forEach(p => cands.push({ x: startX + op.x + p, kind: 'kreupel', owner: op })));
 
+      const inWall = (c) => c.x >= startX + sw / 2 - 0.5 && c.x <= startX + CONFIG.wallWidth - sw / 2 + 0.5;
       const PRIO = { hoek: 0, koning: 1, dubbel: 2, regel: 3, kreupel: 4 };
       const roofMin = (x) => Math.min(...top.underPts(x - sw / 2, x + sw / 2).map(p => p.y));
       const segs = [];
-      cands.forEach(c => {
+      cands.filter(inWall).forEach(c => {
         const x = Math.round(c.x);
         const hit = bands.filter(bd => Math.min(bd.x1, x + sw / 2) - Math.max(bd.x0, x - sw / 2) > 0.5).sort((p, q) => p.y0 - q.y0);
         let cur = [CONFIG.plateThick, CONFIG.plateThick], below = null;
         const curMax = () => Math.max(cur[0], cur[1]);
         const push = (y1, above) => {
-          if (c.kind === 'kreupel') {
+          if (c.kind === 'kreupel' && !c.seam) {
             // Onder de opening niet als hij op een andere opening uitkomt: dat stuk is al de kreupele stijl daarvan.
             const onTop = below && below.op === c.owner, underneath = above && above.op === c.owner;
             if (!onTop && !(underneath && !below)) return;
@@ -524,16 +630,20 @@ window.WallModel = (() => {
       const roofSafetyMargin = 10;
       const sw = CONFIG.studWidth;
       return CONFIG.openings.map(op => {
-        const hx0 = -halfW + op.x - sw;
-        const hx1 = -halfW + op.x + op.w + sw;
-        const s = (op.hR - op.h) / op.w, vo = sw * Math.sqrt(1 + s * s);
+        // Schoorsteen: geen kozijn of dagkant, de plaat loopt door tot op de stijl naast de sparing.
+        const m = op.type === 'schoorsteen' ? 0 : sw;
+        // Gekoppelde zijde: de uitsparing sluit precies aan op die van de buur.
+        const mL = op.joinL ? 0 : m, mR = op.joinR ? 0 : m;
+        const hx0 = -halfW + op.x - mL;
+        const hx1 = -halfW + op.x + op.w + mR;
+        const s = (op.hR - op.h) / op.w, vo = m * Math.sqrt(1 + s * s);
         const clampTop = (y, x) => {
           const ceil = topYAt(x) - roofSafetyMargin;
           return y > ceil ? Math.max(op.y + roofSafetyMargin, ceil) : y;
         };
-        const hy1 = clampTop(op.y + op.h + vo - s * sw, hx0);
-        const hy1r = clampTop(op.y + op.hR + vo + s * sw, hx1);
-        return { hx0, hx1, hy0: op.y, hy1, hy1r };
+        const hy1 = clampTop(op.y + op.h + vo - s * mL, hx0);
+        const hy1r = clampTop(op.y + op.hR + vo + s * mR, hx1);
+        return { hx0, hx1, hy0: op.y, hy1, hy1r, joinL: !!op.joinL, joinR: !!op.joinR };
       });
     }
     const holeTopR = (h) => h.hy1r !== undefined ? h.hy1r : h.hy1;
@@ -593,7 +703,7 @@ window.WallModel = (() => {
       const fixed = [lo, hi];
       holes.forEach(h => {
         if (h.hy0 >= tl.maxY || holeTopAt(h, h.hx0) <= y0) return;
-        [h.hx0 - w / 2, h.hx1 + w / 2].forEach(x => { if (x > lo && x < hi) fixed.push(x); });
+        [!h.joinL && h.hx0 - w / 2, !h.joinR && h.hx1 + w / 2].forEach(x => { if (x !== false && x > lo && x < hi) fixed.push(x); });
       });
       fixed.sort((a, b) => a - b);
       const anchors = fixed.filter((x, i) => i === 0 || x - fixed[i - 1] > w);
@@ -693,8 +803,8 @@ window.WallModel = (() => {
     function build3D(CONFIG, calcData, opts) {
       const { woodMaterial, spaanplaatMaterial, doekMaterial, cementplaatMaterial, battenMaterial } = opts.materials;
       const buitenMateriaal = opts.buitenMateriaal || 'vochtdoek';
-      const stage = BuildStages.clamp(opts.stage);
-      const show = (key) => BuildStages.shows(stage, key);
+      const layers = ViewLayers.normalize(opts.layers);
+      const show = (key) => layers[key];
       const spaanplaatVisible = opts.spaanplaatVisible !== false && show('beplating');
       const buitenVisible = opts.buitenVisible !== false;
       const cladding = opts.cladding || 'horizontaal';
@@ -705,6 +815,7 @@ window.WallModel = (() => {
       const skinFrom = opts.skinFrom > 0 ? opts.skinFrom : 0;
       const painted = !!opts.painted;
       const stone = buitenMateriaal === 'cementplaat' && isStoneFinish(opts.stone) ? opts.stone : null;
+      const felsKey = buitenMateriaal === 'vochtdoek' && isFelsColor(opts.fels) ? opts.fels : null;
       // spaanplaatBelow: naadwand geheel in één unit; onder het dak van de andere unit is het een binnenwand.
       const spaanplaatBelow = !!opts.spaanplaatBelow && skinFrom > 0 && buitenMateriaal === 'vochtdoek';
       const rabatOn = buitenMateriaal === 'vochtdoek' && buitenVisible && show('gevel');
@@ -734,7 +845,7 @@ window.WallModel = (() => {
       let spaanplaatBuitenAreaM2 = 0;
       let spaanplaatBuitenVolumeM3 = 0;
       let battenLengthM = 0, battenVolumeM3 = 0, battenCount = 0, battenPieces = 0;
-      let rabatAreaM2 = 0;
+      let rabatAreaM2 = 0, felsAreaM2 = 0;
       let trasraamAreaM2 = 0, trasraamVolumeM3 = 0;
       let stoneAreaM2 = 0, stoneIsolatieM3 = 0;
       let stucAreaM2 = 0;
@@ -769,16 +880,10 @@ window.WallModel = (() => {
       const startXM = -halfW;
       const topYAt = tl.at;
       const skinAbove = opts.skinAbove > 0 ? opts.skinAbove : 0;
-      const CONFIG_OUT = skinAbove ? Object.assign({}, CONFIG, {
-        wallHeightLeft: CONFIG.wallHeightLeft + skinAbove, wallHeightRight: CONFIG.wallHeightRight + skinAbove,
-        wallTop: CONFIG.wallTop.map(q => ({ x: q.x, h: q.h + skinAbove }))
-      }) : CONFIG;
-      const tlOut = skinAbove ? topLine(CONFIG_OUT, toM) : tl;
+      const CONFIG_OUT = skinConfig(CONFIG, skinAbove, opts.skinTop);
+      const tlOut = CONFIG_OUT === CONFIG ? tl : topLine(CONFIG_OUT, toM);
       const battenAbove = typeof opts.battenAbove === 'number' ? opts.battenAbove : skinAbove;
-      const CONFIG_BAT = battenAbove ? Object.assign({}, CONFIG, {
-        wallHeightLeft: CONFIG.wallHeightLeft + battenAbove, wallHeightRight: CONFIG.wallHeightRight + battenAbove,
-        wallTop: CONFIG.wallTop.map(q => ({ x: q.x, h: q.h + battenAbove }))
-      }) : CONFIG;
+      const CONFIG_BAT = raiseTop(CONFIG_OUT, battenAbove - skinAbove);
       const underPts = tl.underPts;
 
       // LET OP: xMin/xMax zijn wereld-coördinaten (-halfW..+halfW), niet lokaal (0..wallWidth).
@@ -789,7 +894,8 @@ window.WallModel = (() => {
         yMin: op.y * toM,
         yMax: (op.y + op.h) * toM,
         yMaxR: (op.y + op.hR) * toM,
-        wM: op.w * toM
+        wM: op.w * toM,
+        chimney: op.type === 'schoorsteen'
       }));
 
       const floorCuts = opsM
@@ -820,7 +926,21 @@ window.WallModel = (() => {
         horizBeamCount++;
       }
 
-      topPlateOutlines(tl).forEach(pts => {
+      // Bovenregel onderbroken waar een schoorsteen doorloopt.
+      const clipX = (pts, x, keepBelow) => {
+        const out = [], f = (p) => keepBelow ? x - p.x : p.x - x;
+        pts.forEach((p, k) => {
+          const q = pts[(k + 1) % pts.length], fp = f(p), fq = f(q);
+          if (fp >= 0) out.push(p);
+          if ((fp >= 0) !== (fq >= 0)) { const t = fp / (fp - fq); out.push({ x: p.x + (q.x - p.x) * t, y: p.y + (q.y - p.y) * t }); }
+        });
+        return out;
+      };
+      let plates = topPlateOutlines(tl);
+      opsM.filter(op => op.chimney).forEach(op => {
+        plates = plates.flatMap(pts => [clipX(pts, op.xMin, true), clipX(pts, op.xMax, false)]).filter(pts => pts.length >= 3 && polygonArea(pts) > 1e-6);
+      });
+      plates.forEach(pts => {
         wallGroup3D.add(createExtrudedBeam(new THREE.Shape(pts.map(p => new THREE.Vector2(p.x, p.y))), pDepthM, -pDepthM / 2));
         horizBeamCount++;
       });
@@ -858,6 +978,7 @@ window.WallModel = (() => {
       });
 
       opsM.forEach(op => {
+        if (op.chimney) return; // geen latei: de schoorsteen draagt de bovenkant
         const s = (op.yMaxR - op.yMax) / op.wM, vo = sWidthM * Math.sqrt(1 + s * s);
         const opTopShape = new THREE.Shape();
         opTopShape.moveTo(op.xMin, op.yMax);
@@ -940,7 +1061,9 @@ window.WallModel = (() => {
         uv.needsUpdate = true;
         return geo;
       };
-      const topClampedOut = (x) => tlOut.at(Math.max(-halfW, Math.min(halfW, x)));
+      // Voorbij het wandeinde (hoekdoorloop) de daklijn volgen: vlak doorgetrokken steekt hij boven een steil dakvlak uit.
+      const beyondEnd = (T) => (x) => Math.min(T.at(x), T.at(Math.max(-halfW, Math.min(halfW, x))));
+      const topClampedOut = beyondEnd(tlOut);
       const layerShapes = (a, b, y0, yCap) => {
         if (b - a <= edgeEps) return [];
         const capped = yCap === Infinity;
@@ -1216,7 +1339,7 @@ window.WallModel = (() => {
         const rExt = extM(rabatDepthMM);
         const rxL = -halfW - rExt.left, rxR = halfW + rExt.right;
         const rY0 = Math.max(skinStartY(trasraam), skinFrom) * toM;
-        const rTop = (x) => tlBat.at(Math.max(-halfW, Math.min(halfW, x)));
+        const rTop = beyondEnd(tlBat);
         const rabatShapes = (rxR - rxL > edgeEps && tlBat.maxY > rY0 + edgeEps)
           ? columnMinusRects(rxL, rxR, rY0, rTop, outerHoles.map(holeRect), { extraXs: tlBat.kinks.concat([-halfW, halfW]) }).map(piece => {
             const shape = new THREE.Shape(piece.outer.map(q => new THREE.Vector2(q.x, q.y)));
@@ -1224,6 +1347,7 @@ window.WallModel = (() => {
             return shape;
           }) : [];
         rabatAreaM2 = rabatShapes.reduce((sum, shape) => sum + shapeAreaWithHoles(shape), 0);
+        if (felsKey) { felsAreaM2 = rabatAreaM2; rabatAreaM2 = 0; }
         if (rabatOn && rabatShapes.length) {
           const geo = new THREE.ExtrudeGeometry(rabatShapes, { steps: 1, depth: rabatDepthMM * toM, bevelEnabled: false });
           const gridM = (facade && facade.gridY0 !== undefined ? facade.gridY0 : skinStartY(trasraam)) * toM;
@@ -1233,7 +1357,7 @@ window.WallModel = (() => {
             if (Math.abs(nrm.getX(k)) > 0.5) uv.setXY(k, z, y); else if (Math.abs(nrm.getY(k)) > 0.5) uv.setXY(k, x, z); else uv.setXY(k, x, y);
           }
           uv.needsUpdate = true;
-          const mesh = new THREE.Mesh(geo, rabatMaterial(opts.rabatColor, cladding));
+          const mesh = new THREE.Mesh(geo, felsKey ? felsMaterial(felsKey) : rabatMaterial(opts.rabatColor, cladding));
           mesh.position.set(0, 0, zDoek);
           mesh.castShadow = true;
           mesh.receiveShadow = true;
@@ -1241,7 +1365,7 @@ window.WallModel = (() => {
         }
       }
 
-      if (show('gevel') && window.KozijnModel) {
+      if (show('kozijnen') && window.KozijnModel) {
         const sh = CONFIG.sheathingThick, half = CONFIG.studDepth / 2;
         const exterior = buitenMateriaal === 'vochtdoek' || buitenMateriaal === 'cementplaat';
         const place = exterior ? { zOut: half + sh, depth: KozijnModel.PROFILE.depth, exterior: true }
@@ -1277,7 +1401,7 @@ window.WallModel = (() => {
         const holes = sheathingHoles(CONFIG);
         CONFIG.openings.forEach((op, i) => {
           const h = holes[i];
-          if (!h) return;
+          if (!h || op.type === 'schoorsteen') return; // de schoorsteen sluit de sparing zelf af
           const x0 = -CONFIG.wallWidth / 2 + op.x, x1 = x0 + op.w, y0 = op.y;
           const topAt = (x) => op.y + op.h + (x - x0) / op.w * (op.hR - op.h);
           const hTop = (x) => holeTopAt(h, x);
@@ -1288,35 +1412,40 @@ window.WallModel = (() => {
           ].filter(pts => area(pts) > 1);
           const fill = KozijnModel.normalize(op.fill);
           const isWindow = op.y >= CONFIG.plateThick;
+          // Gekoppelde zijde: geen dagkant; vensterbank en waterslag lopen door tot de naad.
+          const over = (d) => [op.joinL ? x0 : x0 - d, op.joinR ? x1 : x1 + d];
           if (finishIn) {
             ring.forEach(pts => prism(pts, zIn, zIn + sh, spaanplaatMaterial));
             if (buitenMateriaal === 'spaanplaat') ring.forEach(pts => prism(pts, zSheetOut - sh, zSheetOut, spaanplaatMaterial));
             const zB = fill ? (exterior ? kozBack : null) : (buitenMateriaal === 'geen' ? halfD : zSheetOut);
             if (zB !== null) {
               const boards = [
-                [{ x: x0, y: y0 }, { x: x0 + T, y: y0 }, { x: x0 + T, y: topAt(x0 + T) }, { x: x0, y: topAt(x0) }],
-                [{ x: x1 - T, y: y0 }, { x: x1, y: y0 }, { x: x1, y: topAt(x1) }, { x: x1 - T, y: topAt(x1 - T) }],
+                !op.joinL && [{ x: x0, y: y0 }, { x: x0 + T, y: y0 }, { x: x0 + T, y: topAt(x0 + T) }, { x: x0, y: topAt(x0) }],
+                !op.joinR && [{ x: x1 - T, y: y0 }, { x: x1, y: y0 }, { x: x1, y: topAt(x1) }, { x: x1 - T, y: topAt(x1 - T) }],
                 [{ x: x0, y: topAt(x0) - T }, { x: x1, y: topAt(x1) - T }, { x: x1, y: topAt(x1) }, { x: x0, y: topAt(x0) }]
-              ];
+              ].filter(Boolean);
               boards.forEach(pts => prism(pts, zIn, zB, spaanplaatMaterial));
-              if (isWindow) prism([{ x: x0 - 30, y: y0 - SILL + 5 }, { x: x1 + 30, y: y0 - SILL + 5 }, { x: x1 + 30, y: y0 + 5 }, { x: x0 - 30, y: y0 + 5 }], zIn - SILL_OUT, zB, spaanplaatMaterial);
+              const [sa, sb] = over(30);
+              if (isWindow) prism([{ x: sa, y: y0 - SILL + 5 }, { x: sb, y: y0 - SILL + 5 }, { x: sb, y: y0 + 5 }, { x: sa, y: y0 + 5 }], zIn - SILL_OUT, zB, spaanplaatMaterial);
             }
           }
           if (finishOut) {
             const outMat = KozijnModel.colorMaterial(fill ? fill.out : 'antraciet');
             ring.forEach(pts => prism(pts, halfD + G, zFacade, outMat));
-            if (isWindow && fill) prism([{ x: x0 - 20, y: y0 - 25 }, { x: x1 + 20, y: y0 - 25 }, { x: x1 + 20, y: y0 + 5 }, { x: x0 - 20, y: y0 + 5 }],
+            const [sa, sb] = over(20);
+            if (isWindow && fill) prism([{ x: sa, y: y0 - 25 }, { x: sb, y: y0 - 25 }, { x: sb, y: y0 + 5 }, { x: sa, y: y0 + 5 }],
               CONFIG.studDepth / 2 + sh - 20, zFacade + SLAG_OUT, outMat);
           }
         });
       }
+      if (!show('regelwerk')) ViewLayers.hideByMaterial(wallGroup3D, [woodMaterial]);
 
       return {
         group: wallGroup3D,
         stats: {
           woodVolumeM3, spaanplaatVolumeM3, spaanplaatAreaM2, cementplaatVolumeM3, cementplaatAreaM2, doekAreaM2,
           spaanplaatBuitenAreaM2, spaanplaatBuitenVolumeM3, horizBeamCount,
-          battenLengthM, battenVolumeM3, battenCount, battenPieces, rabatAreaM2, trasraamAreaM2, trasraamVolumeM3, trasraamStoneAreaM2, trasraamIsolatieM3, stoneAreaM2, stoneIsolatieM3, stucAreaM2
+          battenLengthM, battenVolumeM3, battenCount, battenPieces, rabatAreaM2, felsAreaM2, trasraamAreaM2, trasraamVolumeM3, trasraamStoneAreaM2, trasraamIsolatieM3, stoneAreaM2, stoneIsolatieM3, stucAreaM2
         }
       };
     }
@@ -1324,7 +1453,7 @@ window.WallModel = (() => {
     // Dubbelzijdig: de schuine regel heeft geen vaste oriëntatie.
     const wedgeMats = new WeakMap();
     function wedgeMaterial(wood) {
-      if (!wedgeMats.has(wood)) { const m = wood.clone(); m.side = THREE.DoubleSide; wedgeMats.set(wood, m); }
+      if (!wedgeMats.has(wood)) { const m = wood.clone(); m.side = THREE.DoubleSide; m.userData.base = wood; wedgeMats.set(wood, m); }
       return wedgeMats.get(wood);
     }
 
@@ -1545,8 +1674,8 @@ window.WallModel = (() => {
     }
 
     return {
-      STANDARD_BEAM, STOCK_LENGTHS_MM, CORNER_STUDS, EXTERIOR_MATERIALS, OPENING_TYPES, BATTEN, CLADDING_DIRECTIONS, CLADDING_THICK_MM, RABAT, RABAT_COLORS, rabatHex, STUC, STUC_COLORS, isStucColor, stucHex, claddingOffset, cornerExt, TRASRAAM_DEFAULT_MM, STONE, STONE_COLORS, TRASRAAM_STONES, isStoneFinish, stoneThumbUrl, trasraamFor, skinStartY, computeBattens, planPurchase, purchaseText,
-      sheathingHoles, skinSegmentsAtY, topLine, wallTopPoints, topPlateOutlines, openingTopAt, openingTopMax, openingArea, openingSpanAtY,
+      STANDARD_BEAM, STOCK_LENGTHS_MM, CORNER_STUDS, EXTERIOR_MATERIALS, OPENING_TYPES, BATTEN, CLADDING_DIRECTIONS, CLADDING_THICK_MM, RABAT, RABAT_COLORS, rabatHex, FELS, isFelsColor, felsHex, STUC, STUC_COLORS, isStucColor, stucHex, claddingOffset, cornerExt, TRASRAAM_DEFAULT_MM, STONE, STONE_COLORS, TRASRAAM_STONES, isStoneFinish, stoneThumbUrl, trasraamFor, skinStartY, computeBattens, planPurchase, purchaseText,
+      stoneMaterial, stucMaterial, felsMaterial, claddingMaterial, sheathingHoles, skinSegmentsAtY, topLine, skinConfig, wallTopPoints, topPlateOutlines, openingTopAt, openingTopMax, openingArea, openingSpanAtY,
       validateState, resolveOpenings, computeBOM, groupBOM, buildConfig, configFromState, thicknessOf, computeFrame,
       createMaterials, build3D, computeSpecs
     };

js/wall/wall.js

@@ -6,7 +6,10 @@
  */
 
 const WALL_TEMPLATE = `
-  <div id="app-container">
+  <div id="app-container" class="ed-app">
+   <div class="ed-main">
+    <div class="ed-toolbar" id="wall-toolbar"></div>
+    <div class="ed-views">
     <div id="left-column">
       <div id="pane-2d-container">
         <div class="pane-2d-sub pane-2d-primary" id="pane-2d-front">
@@ -23,9 +26,17 @@ const WALL_TEMPLATE = `
             <canvas id="canvas-2d-side"></canvas>
           </div>
         </div>
+      </div>
+    </div>
+    <div id="right-column">
+      <div id="pane-3d">
+        <div class="pane-label">3D</div>
+      </div>
+    </div>
+    </div>
    </div>
 
-      <div id="control-panel">
+      <div id="control-panel" class="ed-panel">
         <div class="io-toolbar">
           <input type="file" id="file-import-json" accept="application/json" style="display:none;">
           <span id="io-status" class="io-status"></span>
@@ -34,6 +45,7 @@ const WALL_TEMPLATE = `
           <button class="tab-btn active" data-tab="tab-wall"><i class="bi bi-rulers"></i> Opbouw</button>
           <button class="tab-btn" data-tab="tab-opening"><i class="bi bi-door-open"></i> Openingen</button>
           <button class="tab-btn" data-tab="tab-materials"><i class="bi bi-layers"></i> Materiaal</button>
+          <button class="tab-btn" data-tab="tab-specs"><i class="bi bi-clipboard-data"></i> Resultaat</button>
         </div>
 
         <!-- TAB 1: WAND -->
@@ -104,10 +116,6 @@ const WALL_TEMPLATE = `
                 <div><input type="number" id="inp-max-sp" value="480" step="10" min="150" max="1500"><span class="unit">mm</span></div>
               </div>
 
-              <div class="divider"></div>
-              <div class="result-row"><span>Verticale balken</span><span data-spec="vert-beams" class="highlight">-</span></div>
-              <div class="result-row"><span>Horizontale balken</span><span data-spec="horiz-beams" class="highlight">-</span></div>
-              <div class="result-row"><span>Dakhelling</span><span data-spec="roof-angle" class="highlight">-</span></div>
             </div>
           </div>
         </div>
@@ -138,17 +146,10 @@ const WALL_TEMPLATE = `
           </div>
         </div>
 
-      </div>
-    </div>
-
-    <div id="right-column">
-      <div id="pane-3d">
-        <div class="pane-label">3D</div>
-        <div class="toolbar-3d" id="wall-toolbar-3d"></div>
-      </div>
 
+        <div id="tab-specs" class="tab-content">
       <div id="specs-panel-3d">
-        <div class="controls-grid">
+        <div>
           <div>
             <div class="spec-section">
               <h1><i class="bi bi-columns-gap"></i> Balken</h1>
@@ -188,6 +189,7 @@ const WALL_TEMPLATE = `
       </div>
     </div>
   </div>
+</div>
 
   <div id="wall-project-overlay">
     <div id="wall-project-modal">
@@ -218,8 +220,8 @@ const WALL_TEMPLATE = `
         </div>
       </div>
       <div class="modal-footer">
-        <button type="button" id="wall-project-cancel" class="io-btn">Annuleren</button>
-        <button type="button" id="wall-project-save" class="material-toggle-btn active" style="flex:none; padding:6px 18px;">Opslaan</button>
+        <button type="button" id="wall-project-cancel" class="ui-btn" data-esc>Annuleren</button>
+        <button type="button" id="wall-project-save" class="ui-btn ui-btn-primary">Opslaan</button>
       </div>
     </div>
   </div>
@@ -333,16 +335,6 @@ function mountWallEditor(container, callbacks) {
       updateAll();
     }
 
-    function toggleFullscreen3D() {
-      UI.cycle3D(document.getElementById('app-container'));
-      requestAnimationFrame(onWindowResize);
-    }
-
-    function toggleFullscreen2D() {
-      UI.toggle2D(document.getElementById('app-container'));
-      requestAnimationFrame(onWindowResize);
-    }
-
     const PROJECT_PROP_IDS = ['inp-proj-naam', 'inp-proj-plaats', 'inp-proj-straat', 'inp-proj-nummer',
       'inp-proj-tekenaar', 'inp-proj-titel', 'inp-proj-element', 'inp-proj-opmerking'];
     let projectPropsSnapshot = null;
@@ -424,7 +416,7 @@ function mountWallEditor(container, callbacks) {
               ${type === 'schuifdeur' ? sw('fillGlas', 'Glazen blad', f.glas, 'Glas in een smal kader; uit = dicht blad') : ''}
               ${type === 'deur' ? sw('fillVolglas', 'Glasdeur', f.volglas, 'Glas in het hele blad (smal kader)') +
                 pick('fillLeaf', 'Blad', KozijnModel.HINGES, f.leaf, 'Kant van het deurblad (van buitenaf gezien) als er een zijlicht naast past') +
-                pick('fillHinge', 'Scharnier', KozijnModel.HINGES, f.hinge, 'Van buitenaf gezien. Openslaande deuren: twee deuren naast elkaar, bladen naar het midden, scharnieren buiten') +
+                pick('fillHinge', 'Scharnier', KozijnModel.HINGES, f.hinge, 'Van buitenaf gezien. Openslaande deuren: twee deuren naast elkaar en gekoppeld, bladen naar het midden, scharnieren buiten') +
                 pick('fillSwing', 'Draait', KozijnModel.SWINGS, f.swing) : ''}
               ${type === 'schuifdeur' ? pick('fillLeaves', 'Bladen', { 1: '1 blad', 2: '2 bladen (uit elkaar)' }, String(f.leaves)) +
                 pick('fillMount', 'Montage', KozijnModel.SLIDE_MOUNTS, f.mount) +
@@ -499,6 +491,10 @@ function mountWallEditor(container, callbacks) {
                 <label>Schuine bovenzijde</label>
                 <div><label class="ui-switch"><input type="checkbox" data-field="sloped" data-id="${op.id}" ${isSloped(op) ? 'checked' : ''}><span></span></label></div>
               </div>
+              <div class="control-group" title="Tegen de opening ernaast aan: één sparing zonder stijlen, dagkanten of kozijnstijlen ertussen. Twee draaideuren worden openslaand (bladen tegen elkaar), anders één tussenstijl. Onderkant en hoogte gelijk aan de buur; samen max. 2850 mm.">
+                <label>Koppelen</label>
+                <div><label class="ui-switch"><input type="checkbox" data-field="koppel" data-id="${op.id}" ${op.koppel ? 'checked' : ''}><span></span></label></div>
+              </div>
               ${isSloped(op) ? `<button class="opening-roof-btn" data-action="follow-roof" data-id="${op.id}" title="Hoogte rechts zo zetten dat de bovenkant evenwijdig aan de daklijn loopt"><i class="bi bi-slash-lg"></i> Volg dakhelling</button>` : ''}
             </div>
           </div>
@@ -543,6 +539,8 @@ function mountWallEditor(container, callbacks) {
           fillLeaves: 'leaves', fillMount: 'mount', fillSide: 'side', fillDir: 'dir' }[field];
         op.fill[key] = e.target.type === 'checkbox' ? e.target.checked : key === 'leaves' ? Number(e.target.value) : e.target.value;
         if (key === 'leaves' || key === 'mount') renderOpeningsList();
+      } else if (field === 'koppel') {
+        if (e.target.checked) op.koppel = true; else delete op.koppel;
       } else if (field === 'sloped') {
         if (e.target.checked) op.hR = op.h; else delete op.hR;
         renderOpeningsList();
@@ -602,7 +600,7 @@ function mountWallEditor(container, callbacks) {
     function getPureState() {
       return {
         wall: collectWallParams(),
-        materials: { interior: 'spaanplaat', exterior: buitenMateriaal, cladding, trasraam, stone, stuc, rabatColor },
+        materials: { interior: 'spaanplaat', exterior: buitenMateriaal, cladding, trasraam, stone, stuc, rabatColor, fels },
         openings: openings.map(rawOpening)
       };
     }
@@ -631,6 +629,7 @@ function mountWallEditor(container, callbacks) {
       stone = (state.materials && state.materials.stone) || null;
       stuc = (state.materials && state.materials.stuc) || null;
       rabatColor = (state.materials && state.materials.rabatColor) || null;
+      fels = (state.materials && state.materials.fels) || null;
       syncMaterialButtons();
 
       openings = state.openings.map(rawOpening);
@@ -730,12 +729,9 @@ function mountWallEditor(container, callbacks) {
         const warnEl = document.querySelector(`[data-warning-for="${o.id}"]`);
         if (!card || !warnEl) return;
         card.classList.toggle('opening-warn', !!o.overflowing);
-        if (o.overflowing) {
-          warnEl.style.display = 'block';
-          warnEl.textContent = 'Past niet volledig op het gekozen ankerpunt bij deze wandbreedte.';
-        } else {
-          warnEl.style.display = 'none';
-        }
+        const msg = o.overflowing ? 'Past niet volledig op het gekozen ankerpunt bij deze wandbreedte.' : o.koppelWarn ? `Koppelen: ${o.koppelWarn}.` : '';
+        warnEl.style.display = msg ? 'block' : 'none';
+        warnEl.textContent = msg;
       });
     }
 
@@ -1276,14 +1272,14 @@ function mountWallEditor(container, callbacks) {
 
     const wallMaterials = WallModel.createMaterials();
 
-    // Alleen knoppen met data-material/-cladding: de "Opslaan"-knop van Project eigenschappen heeft ook de klasse material-toggle-btn.
     let buitenMateriaal = 'vochtdoek';
     let cladding = 'horizontaal';
     let trasraam = null;
     let stone = null;
     let stuc = null;
     let rabatColor = null;
-    let stage = BuildStages.FINAL;
+    let fels = null;
+    let layers = ViewLayers.all();
     function syncMaterialButtons() {
       document.querySelectorAll('.material-toggle-btn[data-material]').forEach(b => b.classList.toggle('active', b.dataset.material === buitenMateriaal));
       document.querySelectorAll('.material-toggle-btn[data-cladding]').forEach(b => b.classList.toggle('active', b.dataset.cladding === cladding));
@@ -1300,29 +1296,32 @@ function mountWallEditor(container, callbacks) {
 
     let spaanplaatVisible = true;
     let buitenVisible = true;
-    createViewFilter(document.getElementById('wall-toolbar-3d'), [
-      { key: 'binnen', label: 'Beplating binnenzijde' },
-      { key: 'buiten', label: 'Beplating buitenzijde' }
-    ], (v) => {
-      spaanplaatVisible = v.binnen;
-      buitenVisible = v.buiten;
-      update3DScene();
-    });
     let skyMode = Skybox.getMode();
     const skyEnv = Skybox.createEnvironment(scene);
     const applySky = () => {
       skyEnv.fitTo(wallGroup3D, 0);
       Skybox.apply(skyMode, { env: skyEnv, grid, controls, sun: dirLight, ambient, base: { ambient: 0.6, sun: 0.8 }, shadowRoot: wallGroup3D });
     };
-    Skybox.createToggle(document.getElementById('wall-toolbar-3d'), (m) => { skyMode = m; applySky(); });
-    BuildStages.createBar(pane3D, stage, (st) => { stage = st; update3DScene(); });
+    const toolbar = document.getElementById('wall-toolbar');
+    const bar = UI.editorBar(toolbar, document.getElementById('app-container'), {
+      left: `<div class="tb-group tb-tools">${UI.tb('Spiegelen', 'symmetry-vertical', 'data-wt="mirror" title="Horizontaal spiegelen (Shift+H)"')}</div>`,
+      onResize: onWindowResize,
+      layers: {
+        layers, keys: ['regelwerk', 'beplating', 'doek', 'latwerk', 'gevel', 'kozijnen', 'afwerking'],
+        onChange: (l) => { layers = l; update3DScene(); },
+        extras: [{ key: 'binnen', label: 'Beplating binnenzijde' }, { key: 'buiten', label: 'Beplating buitenzijde' }],
+        onExtra: (v) => { spaanplaatVisible = v.binnen; buitenVisible = v.buiten; update3DScene(); }
+      },
+      onSky: (m) => { skyMode = m; applySky(); }
+    });
+    toolbar.querySelector('[data-wt="mirror"]').addEventListener('click', () => mirrorHorizontal());
 
     let lastWallStats = null;
 
     function update3DScene() {
       if (wallGroup3D) scene.remove(wallGroup3D);
       const result = WallModel.build3D(CONFIG, calcData, {
-        materials: wallMaterials, buitenMateriaal, cladding, trasraam, stone, stuc, rabatColor, spaanplaatVisible, buitenVisible, stage
+        materials: wallMaterials, buitenMateriaal, cladding, trasraam, stone, stuc, rabatColor, fels, spaanplaatVisible, buitenVisible, layers
       });
       wallGroup3D = result.group;
       lastWallStats = result.stats;
@@ -1380,7 +1379,7 @@ function mountWallEditor(container, callbacks) {
 
     const inputs = document.querySelectorAll('#tab-wall input');
     inputs.forEach(input => {
-      // Hoogte met de hand gewijzigd: de knikken van een mansarde-/wolfsdak vervallen.
+      // Hoogte met de hand gewijzigd: de knikken van een wolfsdak vervallen.
       if (/^inp-wall-(h-|peak)/.test(input.id)) input.addEventListener('input', () => { wallTopPts = null; });
       input.addEventListener('input', updateAll);
     });
@@ -1416,8 +1415,8 @@ function mountWallEditor(container, callbacks) {
       exportDesign,
       triggerImport,
       mirrorHorizontal,
-      toggleFullscreen3D,
-      toggleFullscreen2D,
+      setView: bar.setView,
+      viewState: bar.viewState,
       openProjectProperties,
       getStateJson: getPureState,
       loadStateJson: applyPureState

json/premade/vlinderwoning.json

@@ -48,7 +48,7 @@
       "mode": "spots",
       "direction": "both",
       "lampHeight": 1950,
-      "lampMin": 1500,
+      "lampMin": 500,
       "lampMax": 3000,
       "minWallWidth": 2000,
       "endOffset": 300,

kosten/intern.csv

@@ -30,6 +30,7 @@ gevel.vochtdoekMontageM;Montage vochtdoek per strekkende meter wand;s/m;600
 gevel.rabatMontage;Montage rabat;s/m²;600
 gevel.steenMontage;Montage steenstrips;s/m²;1800
 gevel.stucMontage;Stucwerk aanbrengen (wapenen, pleisteren);s/m²;1500
+gevel.felsMontage;Montage felsplaten gevel (ook dagkanten en hoeken);s/m²;2100
 dak.dakleerMontage;Montage dakleer;s/m²;600
 dak.rietMontage;Montage riet;s/m²;3600
 dak.beschotMontage;Montage dakbeschot;s/m²;150
@@ -40,6 +41,8 @@ dak.daktrimMontage;Montage daktrim;s/m;300
 dak.nokPlaatsen;Stalen nokbalk plaatsen, stellen en vastzetten;s;2700
 dak.nokVulhoutMontage;Vulhout in de holling van de nokbalk aanbrengen (beide zijden);s/m;240
 dak.nokPersoneel;Personeel bij plaatsen nokbalk (i.p.v. de bezetting);man;3
+dak.paalMontage;Paal plaatsen: stellen, aftoppen, vastzetten aan het dak;s/st.;2700
+dak.zijwandMontage;Zijwand overkapping maken en plaatsen;s/m²;5400
 vloer.afwerkingMontage;Montage vloerafwerking;s/m²;1200
 vloer.sandwichMontage;Montage per sandwichpaneel;s;600
 afwerking.valsPlafondMontage;Montage vals plafond;s/m²;1800

kosten/leveranciers.csv

@@ -12,6 +12,7 @@ gevel.vochtdoekM2;Vochtdoek;€/m²;1,5;;;
 gevel.rabatM2;Rabat (gevelbekleding);€/m²;35;;;
 gevel.steenM2;Steenstrips (gevel + trasraam);€/m²;60;;;
 gevel.stucM2;Stucwerk gevel (wapening + sierpleister op cementgebonden plaat);€/m²;45;;;
+gevel.felsM2;Felsplaten gevel, staande naad (staal, klangen, ondergrond);€/m²;70;;;
 dak.dakleerM2;Dakleer (EPDM);€/m²;18;;;
 dak.rietM2;Riet;€/m²;90;;;
 dak.beschotM2;Dakbeschot OSB 18 mm (bovenop de sporen);€/m²;14;;;
@@ -21,6 +22,9 @@ dak.onderplaatM2;Onderplaat boeideel;€/m²;30;;;
 dak.daktrimM;Daktrim;€/m;12;;;
 dak.staalKg;Stalen nokbalk IPE S235 (op maat gezaagd, geboord, gegrond);€/kg;2,9;;;
 dak.nokOplegging;Oplegging nokbalk (stalen schoen + bouten), 2 per balk;€/st.;45;;;
+dak.paalHoutM3;Paalhout overkapping (eiken, geschaafd);€/m³;2400;;;
+dak.paalvoet;Paalvoet verzinkt, verstelbaar (incl. ankers);€/st.;40;;;
+dak.zijwandM2;Zijwand overkapping (regelwerk, cementgebonden plaat en stuc aan beide kanten, fundering);€/m²;140;;;
 vloer.afwerkingM2;Vloerafwerking;€/m²;35;;;
 vloer.sandwichM2;Sandwichpaneel;€/m²;35;;;
 afwerking.valsPlafondM2;Vals plafond (regelwerk + gipsplaat, afgewerkt);€/m²;38;;;